WBPHED/EE/AMD/ NIeT-24 of 2026-2027/6

Single phase ammeter, size-96 mm X 96 mm X 40 mm, C.L.-1.0, accuracy 0.5 % on full scale for Volt & Amps and 0.2 % for frequency, easy to operate:- Intuitive navigation with single button for self-guided menus, panel key: Single key for programming, navigation or as selector switch, LED display: 7 segment numeric LEDs of height ~14.2 mm (0.55 in) with 4 digits display in one row with kilo value indicator, bright LED indicators - Kilo & Phase indications for measured value, compact meter with 43.5 mm depth behind the panel.(Make:- Schneider, Model No-DM1110)

Single phase Voltmeter CI1.0, 96 mm X 96 mm X 40 mm accuracy 0.5 % on full scale for Volt & Amps and 0.2 % for Frequency.Easy to operate: Intuitive navigation with single button for self-guided menus.Panel key: Single key for programming, navigation or as selector switch.LED display: 7 segment numeric LEDs of height ~14.2 mm (0.55 in) with 4 digits display in one row with kilo value indicator.Bright LED indicators - Kilo & Phase indications for measured value.Compact meter with 43.5 mm depth behind the panel.(Make:- Schneider, Model No-DM1210)

On-delay timer, 5 sec-100 sec, 200-240 V AC, 50 Hz.(Make:-Siemens, Type No-3RP1513-1AP308K)

50 kVAR contactor for capacitor built with auxiliary relay 2NO+2NC, 3 Phase, 415 VAC, 50 Hz.(Make:-Siemens, Type No-3TS1722-0A..5-8K)

At first remove the damaged capacitor power contactor, delat timer, etc from the existing panel after disconnection of all power line.Then fixing the above supplied materials at same place, then making power & control circuit wiring through out the panel work must be done by Experienced electrician and wholly satisfaction of EIC.

Supply, Delivery and storage at site of horizontal Split casing Centrifugal Pumping Machinery with Channel Base Frame, Couplings, Coupling Guards, Companion Flanges, foundation bolt etc. of pump set with Horizontal foot Mounted Induction Motor for the pump duty with adequate margin as per direction of EIC. M.O.C:- a) Volute Casing-C.I. FG-260 b) Impeller-LTB-2 c) Shaft-SS:410 d) Shaft Sleeves-SS:410 e) Neck Ring/Wear Ring-LTB-5 (H-Q-P Curve of Pumps has to be submitted during the delivery) (Make:-KBL/Wilo+Mather & Platt/Flowmore/Other approved make) Motor specifications:- a) Power Rating:-30 KW/40 HP b) Efficiency:-As per IE-4 c)Specific Space heater at terminal box of motor d)Operating Temp:- 50°C e)Cooling arrangement-TEFC. (Make:- CGL/Marathon/Other Approved make)

Discharge-136 M³/Hour. Head-40 Mtr.

250 mm X 125 mm eccentric reducer as per IS:2062.