Karnataka

AOC

Works

Irrigation and Other Works

Rejuvination of Mylara-1st LIS in Hadagali Taluk Vijayanagara District for the year 2025-26 (Reserve for ST Only)

Minor Irrigation Department

Minor Irrigation Division Bellary | Ballari, Karnataka

Amount: ₹40.5 LCloses: 30 Apr 2026Closed

Timeline

Published22 Apr 2026
Closed30 Apr 2026
Awarded—

Bids

1 Bid30 Apr 2026

#	Company	Amount	Status
1	CHETAN L H ₹42.4 Laccepted-aoc	₹42.4 L	accepted-aoc

Tender Value

₹40.5 L

EMD Value

₹41,000

Closing Date

30 Apr 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

SHILPA K

Office Number

Work Description

Rejuvination of Mylara-1st LIS in Hadagali Taluk Vijayanagara District for the year 2025-26 (Reserve for ST Only)

Tender Information

Tender ID

MI/2025-26/IW/WORK_INDENT11540

Reference Number

MI/2025-26/IW/WORK_INDENT11540

Tender Type

Reserved

Product Category

Irrigation and Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

Minor Irrigation Division Bellary

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredContractor Registration certificate, Class 3 and Above, PWD Registration Reserve for ST Only

RequiredAchieved in at least ONE financial years during the last five years i.e. 2020-21 to 2024-25 a minimum financial turnover in all classes of civil engineering construction works only of Rs.4045488.40 Financial turn over of previous years will be given a weightage of 10percentage per year to bring to them to the price level of the FY 2025-26.

RequiredSatisfactorily completed at least 90percent of contract value in the last five years i.e.2020-21 to 2024-25 as a prime contractor,at least one Similar work such as any Construction work value not less than Rs.10.11 lakhs. The weightage of 10percent will be given per year to bring them to the price level of the FY 2025-26.

RequiredLiquid assets and or availability of credit facilities of not less than Rs12.14 Lakhs Credit lines or letter of credit or certificates from banks for meeting the fund requirement etc

RequiredThe bidders are instructed to visit the site before submitting the bid and copy of the site visit certificate has to be obtained by the concerned AEE and the same has to be uploaded in KPPP portal.

RequiredBidders shall ensure upload of relevant document certifying his/her status as Scheduled Tribe as prescribed in the tender document.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Contractor Registration certificate, Class 3 and Above, PWD Registration Scheduled Tribe

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP Portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The tenderer should maintain the scheme during the defective liability period.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall scan & upload all the original documents required for this bid to the KPPP portal. The Original Documents shall be produced at the time of opening of Bid for physical verification.

Unbalanced tenders should include Security amount and unbalanced amount that is difference of amount put to tender and quoted amount.

EPF and ESI Registration Certificate of Contractor should be uploaded upto date.

During the execution of work, if any minor minerals are required contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the Mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral concession rules 1994 (as amended from time to time) will be deducted from contractors bills at the time of payment.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The contractor has to furnish Additional performance security deposit of an amount equal to the difference in the amount put to tender and the tendered amount in addition to security deposit of 5% of contract price.

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use and certificate shall be submitted.

The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached duly attested to e-tender document. The original certificates/document shall be produced on or before stipulated date and time for verification. Scanned signature of bidder/authorized representative of the bidder shall be attached while up loading bid document.

Each item of BOQ to be read as with all lead and lifts and as per the directions of Engineer in charge.

A copy of GST registration certificate to be uploaded.

Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos to be uploaded.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

Incomplete tender documents will be rejected.

Corrigendum will be published in web site for all modifications/corrections if any.

The contractor /firm shall send the authorization letter for the representatives duly attesting their signature.

The intending bidder are advised to visit the site of work before submission of the tenders.

If any of the Contractor who have been black listed as per Government order are not eligible to participate in this tender.

As per the Karnataka building and other construction workers welfare cess act 1996 1 % of the bill amount will be deducted from the bill.

The tender Processing charges paid by the bidder are not refundable even if the tender are cancelled.

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Further information can be had from the office of the Executive Engineer, Minor Irrigation & Ground Water Development Division, Ballari during the office Hours.

The work done certificate shall be issued not below the rank of Executive Engineer.

All relevant documents as per KW-2 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The contractor shall quote the rates without adding GST either materials or works contract (Service). GST payable by the Contractor under this works Contract will be paid to the Contractor separately over and above the Contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority.

Annual turnover certificate along with Balance sheet certified / attested by Chartered Accountants should be uploaded with 18-Digitis system generated unique number (UDIN Number)

The amount put to tender is Exclusive of GST. Hence GST will be paid separately.

The department and contractor are bounded for Excess payment/recovery in case of revision in GST Rates.

The bidders are instructed to visit the site before submitting the bid and copy of the site visit certificate has to be obtained by the concerned AEE and the same has to be uploaded in KPPP portal.

Fallow the conditions as per attached Government Order MID/434/MISU/2025 dt:22.08.2025

AMOUNT SHOULD NOT EXCEED THE APPROVED ESTIMATED COST

The contractor quoting 20% below or beyond 20%below has to submit the rate analysis for quoted rates.

Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5.0- B) Where, A Maximum value of civil engineering works executed in any one year during the last five years i.e. 2020-21 to 2024-25 (updated to 2025-26 price level) taking into account the completed as well as works in progress. N, Number of years (03 months)prescribed for completion of the works for which tenders are invited. B, Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 09 months (09/12-0.75) year i.e. period of completion of the works for which Tenders are invited.

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Tribe as prescribed in the tender document.

Fee & Financial Details

Tender Fee Amount

₹1,020

EMD Fee Amount

₹41,000

Important Dates

Last Activity

30 Apr 2026

Published

22 Apr 2026

Download Ends

29 Apr 2026

BOQ Preview

•

Rejuvination of Mylara-1st LIS in Hadagali Taluk Vijayanagara District for the year 2025-26 (Reserve for ST Only)

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete.( Ref :- As per relevant IS)

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete. (( R...

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). ( Ref :- As per relevant IS)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running ...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - ( Ref :- As per relevant IS...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete.( Ref :- As per r...

•

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours AND 70 PERCENTAGE lumen maintenance with CRI GREATER THAN 80. Power Input: 220-240V...

•

Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC

•

Conduit /casingcapping using2x1.5Sqmm(Phase&Neutral) &

•

1x1.0 sqmm(Earthwire) FRLSmultistrand PVC in...

•

oint wiring using Copper wire with switch. oint wiring using Copper wire with switch.

•

Supplying and wiring adopting loop system in existing PVC

•

Conduit /casingcapping using2x1.5Sqmm(Phase&Neutral) &...

•

Point wiring using Copper wire with switch.

•

Supplying and wiring adopting loop system in existing PVC

•

Conduit /casingcapping using2x1.5Sqmm(Phase&Neutral) &

•

1x1.0 sqmm(Earthwire) FRLSmultistrand PVC ...

•

Supplying6Aflushtypesocket and6Aflush typeSPswitcheither

•

surface/flushmountinginexistinggangboxor in 4mmthickplastic

•

sheet andfixingover aflushmountedwoodenboxandwiringusing

•

necessary capacity wires a...

•

Supplyingandfixinghylumplasticsheet 3mmthickwithnecessary

•

nitches for fixing switches, regulators etc., andfixingonexisting

•

wood or metal box using N. F. screws..( Ref :- As per relevant IS)

•

Supplying&fixing miniature circuit breakers on existingMCB

•

distribution boards using necessary fixing materials and 'C' Type

•

curve, indicatorON/OFF, energycross-3 withShort circuitbreaking

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm

•

trench width, as per drawing and technical specifications, including setting

•

out, shoring, strutting, barricading, caution li...

•

1.1 kV, XLPE or Heat resistant PVC

•

insulated, PVC exutruted Inner Seath

•

Armoured LTUG Cable as per IS-1554 (Part

•

1) or IS-7098 Part-1, Armouring strip

•

thickness and resistivity as per IS-3975 (11 ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

•

Wooden/Aluminum Rollers as directed by the departmental staff ( Ref :- As per relevant IS) 2.5 to 25 Sqmm

•

Supplying, fixing,wiring,earth electrodeforgroundingconduits, I.C.

•

cutouts andother equipment'son themeter boardusing40mmdia

•

2.90mmthickGIpipe2.5mlongburiedinapit .Thepit shouldbe

•

filledwithequalpropo...

•

Fixingall typesandall capacitiesof fluorescent /falseceiling/ spot

•

light/CFL/LEDfittingsindooronthewall/ceiling/rafters/girders

•

using 23/0.0076" twintwistedPVCinsulatedwires, requiredNosof

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

694:2010( Ref :- As per...

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

694:2010( Ref :- As per...

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

694:2010( Ref :- As per...

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

694:2010( Ref :- As per...

•

Cutting and burning or disposing off Apu / Jondu from marshy areas

•

as directed with all other ancillary operations complete. ( Ref :- As per relevant IS)

•

utting and removing jauliflora bushes upto 1.50 m girth excluding

•

removal of stumps and including burning or disposing off the materials

•

as directed with all other ancillary operations compl...

•

Excavation and removal of silt and silt mixed with sand from canal bed

•

by manual means including disposing off the same in spoil bank or

•

on the canal embankment in layers as directed with a...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Providing and laying 100 mm thick in-situ M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for canal lining deploying batching plant, transit mixer and...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). ( Ref :- As per relevant IS)

•

Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. Th...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dire...

•

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complet...

•

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complet...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specified...

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

•

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-cha...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Ref :- As per relevant IS)

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work afte thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Supplying of spare parts to 75 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete, ...

•

Winding of 75 HP DWT 3 phase induction motor Kirloskar/ Jothi/ Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry,...

•

Supplying starter spares for 125Amps air brake ATS starter replacement of suitable contacts on volt coil, timer, pushing timer, pilot lamp, amps meter and volt meter, turnel plate, push botton, MCB, B...

•

Supplying of spare parts nad repair re conditioning, trail running of 10" sizes sluice valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint in...

•

Supplying of spare parts nad repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint incl...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-2 Mylara I 11540 ST.doc

Tender Document • 24.11 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

CHETAN L H

₹42.4 Laccepted-aoc