PROVISION OF FLOOR TILES IN BEDROOM OF ORs MD ACCN BUILDING NO P-41 AT MOUDE LINES AND ADDITION/ALTERATION TO JOINERY WITH CONNECNTED ITEMS IN JCOs/ORs MD ACCN BUILDING NO. P-29 TO P-31 AT TIGRIS ROAD IN THE AREA OF AGE BR III UNDER GE (EAST) DELHI C

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4.0Sqm each and removing from site, complete all as specified and as directed.

Taking down shutters of any description exceeding 1Sqm and not exceeding 2Sqm each, complete all as specified and as directed.

12-15mm thick Granite stone any type, (table rubbed and polished) in steps, shelves, pillars, window cills, cooking platforms and the like, laid over 20mm thick layer of cement mortar 1:3 after rougheniung of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including moulding of edges, complete all as specified and as directed.

Pressed steel frames size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portion of frames with PCC 1:3:6 Type C-0 using 12.5mm graded crushed stone aggregate etc., complete all as specified and as directed.

Pressed steel frames size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portion of frame with PCC 1:3:6 Type C-0 using 12.5mm graded crushed stone aggregate etc., complete all as specified and as directed.

Factory made flush shutter 40mm thick, Solid core construction with Block board and plywood face pannels, commercial type on both sides, complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS squqre tube. complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

100mm size stainless steel butt hinges, complete all as specified and as directed.

Mild steel pressed handle oval type, stove enamelled black of size 125mm size, complete all as specified and as directed.

Mild steel pressed handle oval type, stove enamelled black of size 150mm size, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section, fixed in repairs, complete all as specified and as directed.

250 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, fixed in repair complete all as specified and as directed.

Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and as directed.

Aluminium alloy powder coated any tint standard hollow section with special powder coated coloured or any tint window frame with one glazed shutter (fixed) and two Nos glazed and wire gauged shutter sliding type with aluminium section as per series A(15mm) 3 track of Jindal section number of sliding windows, with framed shutter including aluminium alloy powder coated snap type beads handles aluminium powder coated barrel tower bolts & glazing clips. joints cleats rubber gaskets etc compl all as specified including provision of 5.5 mm thick tinted glass of superior quality and stainless steel wire cloth of 0.36 mm nominal dia wire and average width of aperture 1.4 mm and aluminium grill including all standard fittings, complete all as specified and as directed.

Aluminium powder coated ventilator shutter fixed type with sash bar, aluminium section weighing 0.55kg/m including necessary joining cleates , glazing clips, rubber packing, anodised aluminium snap beading screw sets, complete all as specified and as directed.

Mild steel framed work as in grills, gratings etc., with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work, complete conforming to Fe 290 Gde-E-165 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces etc., exclusive of steel sheeting or other covering, hanging or fastening and fixing complete conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

Anti skid joint less ceramic coloured tiles 7 to 8mm thick area of each tiles not exceeding 0.11Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Anti skid joint less ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical urfaces of skirtings, dados, sides of pillars, risers of steps, size of each tile 300mm x 200mm x 7-8mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying a layer of Birla white/J K white wall care putty, applying a coat of primer to smooth finish and finally finishing the wall surface with two coats of oil bound distemper, complete all as specified and as directed.

Preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss efflocerent salts and treading oil and greasy spots and applying a layer of Birla white/J K white wall care putty and sanding the surface to a smooth finish and applying two coats of oil bound distemper, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coats of synthetic enamel paint on wooden surfaces of any description over a coat of pink primer, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

Vipul Construction

imran construction company

SAGAR ENTERPRISES

Simran construction Company

VIKRANT CONSTRUCTION CO.