Construction of cafeteria for Polytechnic college at watapora, Bandipora

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within alead of 50 m.

Providing and laying of stone soling hand packed including loading, unloading,cost of material and carriage complete job.

Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)grade excluding the cost of centering and shuttering - All work up to plinth level :including curing,hire and runing charges of concrete mixer,vibrator,T&P ,complete job

P/F placing in position steel reinforcement bars in RCC works i/c cost of binding wire, head load i/c cutting, binding complete job.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platforms.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Suspended floors, roofs, landings, balconies and access platforms.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand )upto plinth level.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand i/c Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

providing and laying of Random rubble masonry in soakage pit with hard stone including levelling, dressing,carriage,scaffolding charges complete job upto plinth level.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and applying putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete jobincluding scaffolding and cost of all materials

Finishing exterior walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sq

Providing and laying Vitrified floor tiles of size (600x600mm) (thickness to be specifiedby manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.complete but excluding cost of cement.make: kajaria or equivalent

Providing and laying ceramic glazed wall tiles of size (600x600mm) (thickness to be specifiedby manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.complete but excluding cost of cement.make: kajaria or equivalent

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge,.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent but excluding cost of cement

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood

Providing and fixing of 35 mm thick kail wood glazed shutters for windows and clerestory windows, including ISI marked M.S. pressed butt hinges brightfinished of required size with necessary screws,handles,T-bolts all complete including cost of all materials as per direction of Engineer-in-charge.

Providing and fixing of 35 mm thick kail wood door shutters including ISI marked M.S. pressed butt hinges brightfinished of required size with necessary screws,handles,T-bolts, L-drops etc complete including cost of all materials as per direction of Engineer-in-charge.

Providing andfixing of 3.5mm thick glass panes in window shutters including cost of glass cutting putty, and beading complete. Make saint gobin or equivalent

Providing and fixing wire gauge shutters using stainless steel grade 304 wiregauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws and beading complete job.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting new wood / wood based surfaces with two or more coats of synthetic Enamel of specified shade and brand to an even shade excluding priming and preparation of surfaces but including cost of sand papering and cleaning.

Internal electricfication including wiring, switches, boards, MCB's, lights,fans 1200mm, make usha, crompton, havells or equivalent complete including cost of all materials as per direction of Engineer-in-charge.

Electric points

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

saintary works

Providing and fixing Polyvinyl Chloride (PVC) pipes of 100mm dia including cost of all necessary fittings, tee's,bends,tunctions etc complete job. (make: prince, fenolex or equivalent)

Providing and fixing Polyvinyl Chloride (PVC) pipes of 75mm dia including cost of all necessary fittings,tee's, bends, tunctions etc complete job. Make :prince, fenolex or equivalent)

Providing and fixing G.I. pipes (B class) complete with G.I. fittings and clamps, including cutting and making good the walls etc.Make surya prakash or eqivalient

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing of 15 mm C.P. brass bib cock short body of approved quality conforming to IS:8931 nominal bore make jaquar,Grohe or eqiuivalent i/c all fittings nipples etc.

Providing & fixing Long pattern W.C Pan of size 580x440 mm White vitreous china water closet squatting pan (Indian type)along with "S" or "P" trap including all complete as per the direction of Engineer-in charge.make hindware or eqiuivalent including Providing and fixing of 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing 610x460 mm bowl depth 200 mm Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete job.

Providing and fixing White Vitreous China Wash basin size 630x450mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including pedestal, painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 600x450 m.

Providing and placing on terrace (at all floor levels) polyethylene triple layer water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

M/s Tahir Iqbal Meer