Erection of 3.3KV OH line from 33KV/3.3KV CHP Substation to dewatering pump station near pond at Pragati Nagar colony under Dipka Area (Route length - about 1.5KM).

Amount

Trimming of tree branches for erection of the overhead line conductor and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared etc. as required (Trimming of tree branches required about 1 KM out of 1.5 KM (approx.) OH line

Erection of 10/ 11/ 13 mtr. long steel tubular poles including excavation of pole pit as per site conditions and grouting by cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc (0.38 cum each pole)

Erection of 16 mtr. long steel tubular poles including excavation of pole pit as per site conditions and grouting by cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc (0.38 cum each pole) at the crossing of road/ existing OH/belt conveyor

Supplying and erection of galvanised stay set for 1.1 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Stringing of ACSR DOG conductor, including loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding on insulators and jumpering.

Supply, laying & stringing of 8 SWG GI wire earth

Fabrication of MS Channel/Angle/Flat for bracket or clamp as per requirement.

Supplying and fixing of MS nut, bolt of different size as required

Supply of GI wire & erection of cradle guarding wire between the span including binding of guard wire.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and erection of 11 KV Pin insulator with G.I. bolts ans nuts and spindle etc. as required.

Providing & fixing of Disc insulator with hardware 11KV grade

Supply & fixing of 11 KV, 400 Amp. 3 Phase Isolator

Note: The estimated cost is excluding CMPF @ 12% and CMPS @ 7%. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 08 nos.

Total impact of GST for the purpose of CTC

V R ENTERPRISES (BID ID -1140594)

SHASHI BHUSHAN SINGH (BID ID -1136560)

POWERTEK INDIA (BID ID -1138433)