various maintenance work of 33kv Lines in the area of EUTD-1, ALIGARH

Amount

Cartage of following poles Store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labour, T&P carrier etc. required for proper completion of work.

13 Mtrs. ST Poles

11 Mtrs. ST Poles

Cartage of line material viz Conductor, GI earth wire, Cross Arm, Channel, Clamps & other line material from Store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc. and also including the cost of labour, T&P carrier etc. required for proper completion of work. (Dist. 0 to 50 Kms.).

Replacement of 33 KV damaged pole by opening of all existing accessories and conductor from damaged pole properly and removal of damaged pole and erect the new pole at same place including fixing of all existing accessories and conductor on the new pole etc. as per direction of supervising engineer including the cost of all labour, T&P etc. (including carriage of damaged pole to JE Store/other place) required for proper completion of work.

13 Mtrs. ST Poles

11 Mtrs. ST Poles

11 Mtrs. ST Pole Double Support

Re-straightening of inclined 33 KV ST Poles/Rail by removing the soil/mud from bottom side of the poles and re-straightening with the help of rope, bamboo ladder with the help of manpower and construction of round plinth around the S.T. Poles / Rails with cement, sand and concrete in 1:3:6 ratio of size 450 mm. dia & 600 mm height (300 mm. under the ground + 300 mm. over the ground). The plinth should be plastered with ½ inch thick cement and sand of ratio 1:4 & taper rounding the upper most part of the plinth, than after re-sagging the loose HT/LT line including the cost of material, labour and T&P etc. for completion of the above work which will be provided by the contractor at his own cost.

Providing of P.G. Clamps for 33 KV line (Dog to Dog) and replacement damage PG clamp by new clamp as per RESSPO Norms

Replacement of loose/damaged jumpers at 33 KV double pole as per RESSPO Norms.

Resagging of loose 33 KV lines as per direction of supervising engineer. Its includes the cost of labour, T&P etc. required for proper completion of work.

Erection, grouting and nuzzling of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of all grouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual.

Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work.

Removal of existing Dog conductor from damaged 33 KV line including opening of jumpers etc. as per requirement of site and it carriage from site to JE store as per direction of supervising Engineer.

Laying, sagging, stringing and jumpering / binding of Dog Conductor on the 33 KV pole as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work.

Fabrication of Top Channel as per RESSPO Norms.

Fabrication of X-arm Channel as per RESSPO Norms.

Replacement of damaged 33 KV Pin Insulator by new Pin Insulator.

Replacement of damaged 33 KV Disc Insulator by new DiscInsulator.

Safe carriage of 33 KV XLPE cable szie 3x300 sq.mm. from Store Centre, Aligarh to the respective site of work including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at the respective ends. Its laying including making proper connections at respective ends including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work :

Dismantling and removal of existing 33 KV XLPE Cable and then stacking in the respective JE Store/ Store Aligarh as per direction of Supervising Engineer including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work.

Filling of 33 KV I/D/ O/D / Straight through cable jointing kit as per RESSPO Norms.

M/S JITENDRA KUMAR (BID ID -5150371)

SANJAY ELECTRICALS (BID ID -5150376)