SPL REPAIRS TO BLDG NO PS-50 (08XOR MD ACCN AND PROVN OF TOILET BLOCK AT BUDHAL REASI UNDER GE NAGROTA

Amount

SCHEDULE ‘A’ PART-I ( LIST OF B/R WORKS AT NAGROTA) Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site.complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness.complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided.complete all as specified and directed.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion.complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding.complete all as specified and directed.

S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia. complete all as specified and directed.

S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate.complete all as specified and directed.

S&F Hold fast/clamps of mild steel stay for rain water pipes etc confirm to Fe-290 Gde E 165.complete all as specified and directed.

S&F Magic eye with magic glass of all as spd and directed steel body complete all as specified and directed.

S&F Hasp and staple Alumnium anodised lncluding bolt to hinges plate 100mm size complete all as specified and directed.

S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed.complete all as specified and directed.

S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all as specified and directed.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings.complete all as specified and directed.

M&L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats.

S&F 19mm thick solid PVC board prelaminated one side and other side plain as in cupboard shutter ( Board must be water proofing ,termite proof) .

S&F Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples

S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane complete all as specified and directed.

Allas per item No 28 above but figured glass complete all as specified and directed.

S&F Curtain rod 25mm dia aluminum brass polished with ends bulbs rings of required size including bracket complete all as directed. Make : Vista/lever ( all golden colour).

M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size brickscomplete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc ( wpc to be paid measured and seperately) even and smooth without using extra cement all as specified ( Externally)complete all as specified and directed.

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including three coats of white wash on ceiling including preparation of new surfaces .complete all as specified and directed.

Supply only integral water proofing compound.complete all as specified and directed.

M&L for Providing 10mm thick cement plaster in CM 1:4 on parapets over roof and finished surface even and smooth without using extra cement complete all as specified and directed.

M&Lfor Roughening surfaces of old concrete surfaces of any description over damaged surfaces irregular fascia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed

M&L for Applying two coats of synthetic enamel paint on new steel surfaces any description, not otherwise described over 10 cm width or girth

M&L for Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall care putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint .complete all as specified and directed.

M&L for Complete removal of existing treatment applying two coats of cement base paint old wall surface .

M&Lfor Two coat of white wash on newly /old plastered surface on wall including preparation of surface.complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying two coat of white washing,complete all as specified and directed.

M&L for Machine cut kota stone flooring 18-20 mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface.

All as per item No 46 above but in tread of steps of size (0.90-1.00x 20-30cm)

M&L for Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado.

Ditto as per item No 49 above but in riser of staircase of size (0.90-1.00x 18-25cm)

M&L for Marble work 15mm thick (550mm long X 75mm wide strip) as in border in flooring,over 15 mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with white marble including rubbing, grinding and polishing. complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 using 20mm graded stone agg as in flooring finished even and smooth using extra cement.complete all as specified and directed.

M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match.

All as above but of size 550x 75 - 100mm (as on edges of cooking plateform -ditto-.

M & L for Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over& incl 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough complete all as specified and directed.

All all as per item No-55 above but 450x300x7mm thick glazed ceramic tiles as on walls/ vertical surfaces over 15mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) , removing serviceable tile to store and rubbish off the premises.

M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc.complete all as specified and directed.

M & L for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 50mm thick ) finished even and fair complete all as specified and directed.

M/L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work. complete all as specified and directed.

M/L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc. complete all as specified and directed.

M & L for Cement concrete 1:5:10 type E-2 using 40mm graded crushed stone agg as in foundation/ mass filling .complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 ( using 20mm graded crushed stoneagg) as in chajjas shelves and similar items..for rough finished surfaces complete all as specified and directed.

M & L for Form work to chajjas troughs and similar items including edges.for rough finished surfaces complete all as specified and directed.

M & L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but exc 10 cm..for rough finished surfaces complete all as specified and directed.

S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.

All as Srl Item No 65 above but 6mm to 8mm dia -

S&F Framed work rolled section as in framing compound girder staging for water tank,cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete.

S&F Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position, including PVC float valve 20 mm bore including dismantling of existing tank. complete all as specified and directed.

Taking down steel tubing and connection including removal to store bore of pipe 15mm bore complete all as specified and directed.

Taking down steel tubing and connection including removal to store bore of pipe 20mm bore complete all as specified and directed.

S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors.

All as per Srl item 71 above but fixing only

S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down.complete all as specified and directed.

All as per Srlitem 73 above but fixing only

M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls.complete all as specified and directed.

S&F Shower rose brass chrominium plated 125mm size. complete all as specified and directed.

S&F Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe 15mm dia/ bore of pipe complete all as specified and directed.

S&F Cast copper alloy CPstop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified and directed.

Ditto as per item No 78 above but with long shank and cup ( concealed type)complete all as specified and directed.

S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia complete all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm).complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,screwed for iron pipe 15 mm bore fancy type

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore.complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore.complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.

S&F PVC (SWR) Bends any radius for 110mm bore.complete all as specified and directed.

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.complete all as specified and directed.

S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors.complete all as specified and directed.

S&F PVC (SWR) Branch pieces single ( Single Y) equal or unequal for 75mm bore with oval access doors.complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm complete all as specified and directed.

Ditto as per item 90 above but 110mm complete all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete all as specified and directed.

S&Fas in repair Vitreous china squatting pan "Orissa " pattern size 580x440mm white with integral foot rest all as fixed in repairs including ‘P’ or "S" trap including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450x15mm) flushing pipe complete fixed in repair complete all as specified and directed.

S&F as in repair 110 mm PVC (SWR) WC Connector with lip ring complete all as specified and directed.

Dismantling brick tiles or terracing tile, single layer on roof including mud phuska complete with cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick average as in padding finished even and smooth witout using extra cement

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm complete all as specified and directed.

M&L for Laying APP (atatic polypropylene) modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane. complete all as specified and directed.

M&L for Cement concrete tiles 25 cm x 25cm x20mm thick machine pressed set jointed and pointed in neat cement slurry on roof over APP membrane laid over 15mm thick cement screed bed in cement mortar 1:6

Dismantling plain or corrugated steel sheeting, any gauze, thickness, including Nainital or similar pattern roof coverings etc complete.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F plain black mild steel sheeting 0.80mm thick in ridge, valley gutter & fascia,drip and straight flashing complete all as specified and directed.

Dismantling of iron or mild steel work of any descripitiong like rafter, purlin etc complete all as specified and directed.

Mild Steel framed work as in roof truss framed trussed purlins cranes gantries rails and fastenings and heavy brackets, framing beam, tee, angle, chanel or flat sanction including fabrication all as spd and directed including dismantling of existing.

Demolition of ceiling board (fiber pulp, insulation etc) or insulation board/slabs /blankets any thickness including cover fillets.

S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc of Fe 410-W(Gde-E-250) complete all as specified and directed.

M&L for 4 mm thick Asbestos cement, plain boards, fixed to walls and fixed with screws along with iron frame work complete all as specified and directed.

Dismantling of timber boarding of any description and fixed in any position with nails. complete all as specified and directed.

M&L for Block boards 18/19mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work. complete all as specified and directed.

Taking down existing cement plaster of any description (sunken floor) apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished even and smooth (sunken floor/wall) ( wpc to be paid measured and seperately). complete all as specified and directed.

S&F as in repair kitchen rack made out of 0.63mm thick stainless steel sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden guttiescomplete all as specified and directed.

S&F as in repair stainless steel sink made from AISI-304 (18/8) gde steel of 1mm over all size 688x534 bowl size 610x455x250mm complete all as directed by Engineer-in-Charge & with following specification :- (a) Stainless steel waste coupling. (b) 02 Nos MS angle iron bracket 45cm long made out of MS angle iron 35x35x5mm. (c) Waste pipe and waste coupling.

M & L for 75 mm thick PCC type D2 1:4:8 (40mm graded aggregate) as in subbase of floor complete all as specified and directed.

M&L chequered cement tiles concrete 20cm x20cm x 25mm thic, set jointed in neat cement slurry in floor including 20mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti termite treatment along external wall below concrete or masonry apronn using chemical emulsion @ 2.25 ltr per liner mtr including drilling and plugging holes etc in apron complete all as specified and directed.

M&L for treating of soil under existing floor using emulsion @one ltr per hole 300mm part including drilling and pluging 12mm dia holes with cement mortar 1:2 to match the floors complete all as specified and directed.

Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for Taking credit complete all as specified and directed.

Taking down ceiling fan/Exhaust fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed.

Taking down existing energy meters, keeping aside safely & refixing the same in its original position after making functional & after completion of point wiring/sub main wiring, complete all as specified and directed. Note:- Small items required for fixing the electric energy meter at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

Taking down existing electric water heater, keeping aside safely & refixing the same to its original position after servicing of the whole geyser/making functional and after completion of wiring work, complete all as specified and directed. Note: If any part found unserviceable during the refixing of water heater at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.

M&L for Concealed Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn in and including PVC conduit medium grade ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc terminated in and incl concealed sunken box readily available for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for modular type one light/fan/bell point complete all as specified and directed.( Sunken Box & cover plate shall be measured & paid for seperately)

All as per Srl item No.126 above but for one socket out let 5Amp controlled by one switch on same board with other switch .

All as per Srl item No 126 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .

All as per Srl item No 126 above but controlled by two , two way switch .

All as per item No 126 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting of hole of required size.complete all as specified and directed. Make Bajaj Maxima or equivalent

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed.

S & F Modular socket 2/3 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S & F Modular white cover plate incl Modular base frame for complete 8 module complete all as specified.

S & F Modular white cover plate incl Modular base frame for complete 6 module complete all as specified and directed.

All as per Item No-138 above but 2 module complete all as specified and directed.

All as per Item No-138 above but 3 module complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the as required all as specified and directed.

Supply and fixing LED lights fitting CRCA Channel 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F for LED bulb 7 watt complete all as specified and directed.

S&F Modular bell push piano type 5 Amps complete all as specified and directed.

S&F electric bell ding dong 230 volt AC complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and directed.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down out of exsing UNSV DB with MCBs.complete all as specified and directed.

S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed.

M&L for sheet steel box fabricated out of 2 mm thick CRCA sheet powder coated of size 60x60x25 cm duly compartmentalized suitable to accommodate 4 Nos Energy Meter independently. each compartment shall be provided with suitable door and 2 Nos fancy lock, complete, all as specified and directed by Engr-In-Charge incl taking out existing wooden meter box.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 25 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm bore medium grade GI pipe for earth wire protection and 20 mm bore for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed.

SCHEDULE ‘A’ PART-III ( LIST OF B/R WORKS AT BUDHAL (REASI) ) Surface dressing n. exc. 15cm deep in any type of soil. complete all as specified and directed.

Exc. In trenches n.exc. 1.5m wide and n.exc1.5m wide and n.exc 1.5m deep and getting out in any type of soil.complete all as specified and directed.

M&L PCC 1:4:8 Type D2( using 40mm graded crushed stone agg) , as in fdn filling and mass concrete.complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks (best quality) built in CM 1:6. complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks (best quality) built in CM 1:4. complete all as specified and directed.

M&L RCC (1:2:4) type B-1(using 20mm graded crushed stone aggregate) as in plinth beam beams.complete all as specified and directed.

M&L RCC (1:2:4) type B-1(using 20mm graded crushed stone aggregate) as in lintel and over 1.50 mtr height complete all as specified and directed.

S&F Form work to sides of concrete foundation, footing, bases of columns,raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work for rough finished surfaces complete all as specified and directed.

S&F Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.for rough finished surfaces complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking binding spirally for hooping for column hooking and binding with MS wire annealed not less than 0.9mm dia or securing with clips.

M&L Mild steel TMT bars 5mm dia and over, upto and including 10mm dia as in stirrups, spacers and binders.

M & L for Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg as in foundation/ mass filling .complete all as specified and directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement with integral water proofing compound and two coats of cement base paint over one coat primer complete all as specified and directed

M&L Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement and applying three coats of white wash on newly plastered surface incl preparation of surface complete all as specified and directed

M&L for Hardcore of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered andrammed to a true surface.

M&L Cement concrete 1:4:8 type D-2 using 40mm graded agg and 75mm thick as in sub base of floors.

M&L 25mm thick Cement concrete 1:2:4 type B-0 using 12.5mm graded aggt as in floors.

M&L Non - skid jointless ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for coloured glazed ceramic tiles (designer Pattern, HL) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7 mm /450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .(Make - Kajaria Crema Glossy or equivalent) as directed by the Eng- in charge

S&F Roof trusses (framed) trussed, purlin, crane gantries, plate, rail and fastening and heavy brackets framing ( Beams, Tee, angle, channel or flat section) incl. distance pieces, cleat etc. confirming to Fe-410-W (Gde-E-250) quality A

M&L painting two coats over a coat of red oxide primer to new steel surface of description incl preparation of surfaces over 10 CM width or girth, not other wise described.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F Factory made solid PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with slovent cement, suppling and fixing in the frame at site as per specification and drawing.

S&F Butt hinges medium weight cold rolled mild steel 100mm and fixed.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed 200mm.

S&F Aluminium handles cast type anodised 150mm.

M & L for Cement concrete 1:5:10 type E-2 using 40mm graded crushed stone agg as in sub base .complete all as specified and directed.

M&L, PCC (1:3:6) type C2, using 40mm graded stone aggregate as in plinth protection laid in panel alternate bays not exc 2.00 sqm with 6mm wide joints and joints filled with mastic fillings, finished even and fair complete 50mm thick .

S & F Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg .

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples

S&f Figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane 3.00mm thick.

S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 15mm.

S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 20mm.

S&F GI tubing medium grade with all fittings and fixed complete to walls are laid in floors 25mm.

S&F Bib tap 15mm bore fancy type chromium plated ,cast copper alloy with capstan head screwed down for iron pipes all as specified and as directed. Make Essco Marvel, series, Jaquar or equivalent

S&F 15 mm bore dia fancy type Pillar taps, castcopper alloy, withcapstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.Make Essco Marvel series, Jaquar or equivalent

M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment over & incl 50 mm thick fine sand cushioning complete all as specified and directed.

S&F dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, 75 mm dia of outlet.

S&F PVC (SWR) bends any radius 75mm bore of pipe.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors.

S & F PVC (SWR) junction single (Single T) equal or unequal with acess door, 110 mm bore

Returning filling in incl spreading, leveling watering and well ramming in layers n. exc 25 cm thick.

Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete .

M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc.complete all as specified and directed.

S&F Vitreous China Ware Wash hand basin white, flat back, size 210 x 580 x 460 x mm size with long padestal,32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm dia stainless steel waste coupling of including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed

Supply & Fix Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests (Cat Pt No C0117 Make Parryware or equivalent) complete all as specified and directed

S&F PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 Ltrs capacity fixed complete all as specified and directed .(Make : Parryware ) complete all as specified and directed

S&F PVC connections suitable for 15mm bore with nuts of length 600mm each (superior quality) complete all as specified and directed

S&F Grating doom 100mm dia of PTMT ( Minimum weight 25 gms) complete all as specified and directed

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F Soap dish,vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed

Supply only Integral water proofing compound complete all as specified and directed

S&F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed

S&F Toilet paper holder, vitreous China,box type. complete all as specified and directed .

S&F PVC (SWR) vent cowl 110 mm bore. complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement. complete all as specified and directed

Supply & Fix Anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) complete all as specified and directed.

Supply & Fix 8mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) fixed in ciiling surface complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, reailing, framework of watertanks and similar work conforming to Fe-290, gde E-165. complete all as specified and directed

S&F 20mm Gun-metal, globeor gate valves,with iron wheelhead,screwed both ends for iron pipe and fixed complete all as specified and directed

M&L for Cutting into existing manholes for connecting new drains 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for Salt-glazed stoneware drain pipes 150 mm bore Grade 'A' laid in trenches and jointed complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:2:4 type B2 as in drain complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and directed.

M&L for Precast cement concrete slab for Manhole cover of type B-1, 1:2:4 (using 20 mm graded crushed agg.) set in CM 1:6 complete all as specified and directed.

M&L for Septic tank, exc. In ordinary soil foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC slab covers incl RCC pre-cast manhole cover having 6mm plate all around, reinforced cover with angle iron frame, vent shaft and sludge chamber etc. complete for 10 user as per CE/TD-1202 Sh ½ and 2/2.omplete all as specified and directed.

M&L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.2 M dia X 3.0M deep.omplete all as specified and directed.

SCHEDULE ‘A’ PART-III ( LIST OF E/M WORKS AT BUDHAL (REASI) ) M&L for Concealed Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawnIN and including PVC conduit medium grade ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc terminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63 mm beyond 200 x 300 mm ) duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.

All as per Srl item No.219 above but for one socket out let 5Amp controlled by one switch on same board with other switch .

All as per Srl item No 219 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .

All as per item No 219 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

S&F angle holder, insulated polycabonate body with back plate complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. complete all as specified and directed

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm bore medium grade GI pipe for earth wire protection and 20 mm bore for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F MCB single pole 6 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.

S&F MCB single pole & neutral 6 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.

S&F LED bulb 12 watt.complete all as specified and directed

Supply,Laying and testing XLPE insulated armoured heavy duty with aluminium conductor,1100 volts grade cross sectional area 10 sqmm 2.0 core including taking up old UNSV aluminium cable complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches in any type of soil not exc. 1.5 m wide and not exc. 1.5 in depth for laying of cabel or pipes (where provided for protection of cable) etc. and getting out trimming the sides, forming bottom surfaces to require level complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

S & L brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' bricks laid in trenches flat complete all as specified and directed.

M & L for Tubes, 'light grade', galvanised, with all fitting; laid in trenches for road/drain crossing of size 25 mm bore complete all as specified and directed.

NATIONAL TRADING COMPANY

M/S KALSI ENGINEERS AND CONTRACTORS

CHOPRA CONSTRUCTIONS

M/s Rahat Traders

CHARAN JIT SINGH

Nitika electricals and engineers works

THAPA TRADERS

BMMJ TRADERS AND ENGINEERS

M/S Shankardass Devidass