PETTY REPAIRS TO INTERNAL ELECTRIFICATION IN DAY TO DAY COMPLAINTS BASIS UNDER GE (W) MATHURA

Amount

Attending day to day /door to door petty nature of E/M complaints with essential services recorded/ lodged by the users by electronic media/ ARMAN or in complaint register or received telephonically in respect to repair/rectification of fault in electric light fittings/fixtures, MCB DB's, MCB's/MCCB's of any amps, internal wiring in LT Panel, socket point 5A/15A, fan point, fixture and rectify the faults and replacement of unsv any type of fitting/fixture, bakelite sheet, hanging/taking down of ceiling fans including minor repair, restore the electric supply and making the points/accessories serviceable with replacement of any minor parts like small length of wires and other connected minor accessories including cutting of existing bakelite sheet to accommodate new wiring accessories and to check and removal of any current leakage in service connection /submains of house, repair to building security lights etc in OTM & Md accn of HQ 1 Corps & OMC/3 RPD of Zone B, C, D and E area complete all as specified and directed.

Note for item No 01 :- (i) Any other replacement of major items shall be measured & paid under respective items as supply only. Fixing charge of fitting/fixture and MCB's of any type etc is deemed to be included in the above item. (ii) Contractor representative/tradesman will report to complaint cell in morning at 0900 Hrs to collect routine/urgent nature of complaint related to internal electric supply till completion of contract. The work shall be attended by the tradesman immediately. The contractor will ensure availability of manpower (one electrician and one helper for each Zone ) equipped with all sort of petty items such as galvanised screws, nuts, bolts, washers etc required to accomplish the job. The contractor will also ensure as availability of every type of requisite T&P items to his tradesman. All routine /urgent complaint as received will be issued to tradesman on job docket/slip will be repaired and got signature from user and will be deposited to complaint cell within 24 hrs. iii) Contractor shall maintain the maintenance register showing all daily complaints received and shall maintain job card/docket for attending complaints. The signature of the user shall be obtained on the job docket/slip showing the materials used in the work after completion of the job. (iv) If the Contractor did not attend complaints, a penalty of Rs 250/- per day per complaint recovery shall be made from the work done amount.

(v) The MES Department is not responsible for the payment of staff hired by contractor for complaint rates for attending the complaints by the electrician/helper are deem to be included in the item for repair i.e. Electrician/Helper, as all the items of CA are to be supply and fixed by the contractor. (vi) Proper record (date wise) of complaints received and rectified by the contractor shall be produced for verification at the time of payment of each RAR/Bill. (vii) All the complaint slip/docket, register and connected document will be provided by the contractor without any extra cost. (viii) After any repair the site has to be cleaned and make the surface good. (ix) One Mobile Phone should also be provided by contractor to the each trademan engaged by him with incoming & out going facilities for normal and after working hours also so as to contact him in case of emergency during the entire period covered under the contract to keep liaison/communication with MES staff. (x) In case of requirement, any other materials not included in Schedule 'A' Part II is required at site to maintain the E/M services, it will be issued by department free of cost. Labour cost of repair/replacement of such items is deemed to be included in unit rates quoted in Item No. 1 (xi) Any accident/mishapenning occurred during the execution of work shall be responsibility of Contractor only.

(xii) All necessary tools & plants i.e. multimeter, tong tester, hand torch, spanner set, wrench, screw driver set, testing lamp set, drilling machine, bomboo ladder, blower/vacumm cleaner, crimping tool, cutting and chasing tool, insulation megger etc. will have to kept by each trademan engaged by contractor at his own cost.

Supply only surface/ wall mounted 20 watt LED decorative batten, colour temperature -6500 deg kelvin, ultra slim lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and as directed.

Supply only energy efficient rechargeable LED lamp of 12 Watt, with in built lithium battery, minimum lumen out put - 1200 Lm or above, base cap - B 22 complete all as specified and directed.

Supply only surface/ wall mounted 10 watt LED decorative batten, colour temperature -6500 deg kelvin, ultra slim lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and as directed.

Supply only LED Security Light of 30 watts of lumen output - 3000 Lm, energy saving and environmental friendly long life, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP 66 protection and impact resistant (IK-07) fixed to the housing by SS screws, finished with polyster powder coated metallic silver finish after phosphochromate treatment including driver with output open / short circuit protection, over voltage protection, phase to phase protection, surge voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and other accessories complete all as specified and as directed.

Supply only bulk head LED light of 10 W, IP - 66, environmental friendly, ultra modern, energy saving, surface mounted complete all as specified and as directed.

Supply only LED recess mounted light luminaires of 36 Watt, 6000K slim panel, IP 40 protection, size (595 x 595 x 11) mm for (armstrong/grid ceiling) dust-free installation with high brightness LEDs for glare-free homogenous illumination with electronic driver and all other connected accessories complete all as directed.

Supply only factory made sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated neutral bar and shrounded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply only MCB SPN, 40 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only MCB SPN, 32 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only MCB SPN, 63 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only MCB SP,06 to 32 Amp suitable for 240 V, 50 Hz, 'C' series complete all as specified and directed.

Supply only Angle /Batten holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

Supply only switch flush type of polycorbonate body, single pole, one way 6 Amp, 240 volts (ISI Marked) complete all as specified and directed.

Supply only switch10 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.

Supply only switch 10 Amps, single pole, Modular type, two way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.

Supply only ceiling rose 63 x 30 mm three terminal, polycorbonate body complete all as specified and directed.

Supply only bell push, flush type 6 Amp 240 volt polycorbonate body complete all as specified and directed.

Supply only modular bell push, 10 Amp 240 volt one module complete all as specified and directed.

Supply only call bell ding dong AC 240 volts, single phase complete all as specified and directed.

Supply only socket outlet 3 pin 5/6 Amps flush type polycorbonate body complete all as specified and directed.

Supply only modular socket 10Amp 2/3 pin 2 modulecomplete all as specified and directed.

Supply only switch flush type single pole one way 16 Amp polycorbonate body complete all as specified and directed.

Supply only Modular switch 16 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.

Supply only socket outlet 2 in 1, 3 pin 5/15 Amps polycorbonate body complete all as specified and directed.

Supply only modular socket 6A/16A 3/6 pin combined 2 module complete all as specified and directed.

Supply only 4 step type ISI Marked electronic fan regulator switch type complete all as specified and directed.

Supply only PVC insulated, unsheathed flexible twin twisted copper conductor wire of nominal size 23/0.0076 complete all as specified and directed.

Supply only PVC insulated, unsheathed flexible twin twisted copper conductor wire of nominal size 40/0.0076 complete all as specified and directed.

Supply only FRLS PVC insulated, unsheathed single core flexible copper conductor wire of 1.00 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FRLS PVC insulated, unsheathed single core flexible copper conductor wire of 1.50 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FRLS PVC insulated, unsheathed single core flexible copper conductor wire of 2.50 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FRLS PVC insulated, unsheathed single core flexible copper conductor wire of 4.00 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FRLS PVC insulated, unsheathed single core flexible copper conductor wire of 6.00 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FR PVC insulated, unsheathed single core flexible copper conductor wire of 10.00 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FR PVC insulated, unsheathed single core flexible copper conductor wire of 16.00 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FR PVC insulated, unsheathed single core flexible copper conductor wire of 25.00 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only FR PVC insulated, unsheathed single core flexible copper conductor wire of 35.00 Sqmm suitable upto 1100 Voltage grade with ISI marked, conforming to IS 694 with latest ammendment complete all as specified and directed.

Supply only electronic 5 step ISI marked socket type fan regulator 120/280 volts of 400 watt capacity including connecting up complete all as specified and directed.

Supply only recess mounted LED downlighter of 12 W LED, colour temperature -6500 deg kelvin with inbuilt driver in PC body, premium aesthetics with wider light coverage having cut out dia 112 mm, height 36 mm including all connected accessories complete all as specified and as directed.

Supply only 5 step electronic fan regulator modular type 120 W, 2 Module complete all as specified and directed.

S&F in replacement of 4"x 4" of worn out/rusted sunken box with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness not less than 1.2 mm alongwith new 3.0 mm thick plastic laminated/hylum sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar and match the existing surfaces by white wash/distemper complete all as specified and directed.

S&F in replacement of 7"x 4" of worn out/rusted sunken box with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness not less than 1.2 mm alongwith new 3.0 mm thick plastic laminated/hylum sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar and match the existing surfaces by white wash/distemper complete all as specified and directed.

S&F in replacement of 8" x 10" of worn out/rusted sunken box with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness not less than 1.2 mm alongwith new 3.0 mm thick plastic laminated/hylum sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar and match the existing surfaces by white wash/distemper complete all as specified and directed.

Supply only MCB TP, 40 - 63 Amp, 10 KA complete all as specified and directed.

Supply only PVC insulation tape of width - 18 mm, thickness - 0.125 mm in length of 25 mtr, ISI marked complete all as specified and directed.

Supply only metal plug top of 20 Amp current rating, 2 Pole + Earth, 230V AC complete all as specified and directed.

Supply only fan capacitor 2.5 MFD, 440 volt AC, conforming to IS - 1709 suitable for fans complete all as specified and directed.

Supply only fan capacitor 4.0 MFD, 440 volt AC, conforming to IS - 1709 suitable for fans complete all as specified and directed.

Supply only metal AC socket of 20 Amp current rating, 2 Pole + Earth, 230V AC complete all as specified and directed.

S&F in replacement sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosures with 2 pin and earth plug and socket complete with one SPN MCB of 25 Amp 'C' Series rating 240 Volt including cutting, chasing & PCC work, plastering making good the disturbed surfaces and matching with existing by white wash/distemper complete all as specified and directed.

Supply only MCCB 125 Amp, 4 Pole, 25 KA, fixed thermal & fixed magnetic setting complete all as specified and as directed.

Supply only MCCB 160 Amp, 4 Pole, 25 KA, fixed thermal & fixed magnetic setting complete all as specified and directed.

Supply only MCCB 200 Amp, 4 Pole, 35 KA, fixed thermal & fixed magnetic setting complete all as specified and as directed.

Supply only MCCB 250 Amp, 4 Pole, 35 KA, fixed thermal & fixed magnetic setting complete all as specified and as directed.

Supply only MCCB 400 Amp, 4 Pole, 36 KA, adjustable thermal & fixed magnetic setting complete all as specified and as directed.

Supply only MCCB, 630 Amp, 4 Pole, 36 KA, adjustable thermal & fixed magnetic setting complete all as specified and as directed.

Supply only MCB 125 Amp, 4Pole, 10 KA complete all as specified and directed.

Supply only MCB 100 Amp, 4Pole, 10 KA complete all as specified and directed.

Supply only MCB 63 Amp, TPN, 10 KA complete all as specified and directed.

shyam construction

SHYAMA CONSTRUCTION

ASHOK INFRATECH

RAJ CONSTRUCTIONS

M/S A.K. ENGINEERS

M/S MRS BHASKAR