PROPOSED CONSTRUCTION OF BREEDER LAYER PEN HOUSE 3000 Sq.Ft. , BREEDER GROWING PEN HOUSE1500 Sq.Ft., COMMERCIAL GROWING PEN HOUSE 1500 Sq.Ft x 4, HATCHERY BUILDING 2700 Sq.Ft AND FEED MILL 1000 Sq.Ft.

Amount

PROPOSED CONSTRUCTION OF BREEDER LAYER PEN HOUSE,BREEDER GROWING PEN HOUSE, COMMERCIAL GROWING PEN HOUSE, HATCHERY BUILDING AND FEED MILL

"Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.By Mechanical Means SSR It. No.-21.02/Pg.-153" Breeder layer pen house -37.39 Hatchery building -19.44 Commercial growing pen house -9.5*4 =38 Breeder growing pen house -9.5 Feed mill -9

"Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. By Mechanical Means SSR It. No.-21.06/Pg.-153" Breeder layer pen house -29.7 Hatchery building -29.16 Commercial growing pen house -19.44*4 =77.76 Breeder growing pen house -19.44 Feed mill -12.96

"Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page Number 263 SSR Item. No.-21.37 /Pg.-157" Breeder layer pen house - 247.88 Hatchery building -83.70 Commercial growing pen house -142.02*4=568.08 Breeder growing pen house -142.02 Feed mill -140.88

"Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. SSR Item. No.-21.40/Pg.-157" Breeder layer pen house -41.31 Hatchery building -14.77 Commercial growing pen house -25.06*4=100.24 Breeder growing pen house -25.06 Feed mill -13.71

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Breeder layer pen house -6.06 Hatchery building -19.63 Commercial growing pen house -3.9*4=15.6 Breeder growing pen house -3.9 Feed mill -2.28

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR It No.- 25.11/Pg.-178 Breeder layer pen house -14.03 Hatchery building -9.91 Commercial growing pen house -7.65*4=30.6 Breeder growing pen house -7.65 Feed mill -6.91

"Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR It.No.-25.31/Pg.-179" Breeder layer pen house -3.85 Hatchery building -7.71 Commercial growing pen house -2.33*4=9.32 Breeder growing pen house -2.33 Feed mill -1.59

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR It.- 25.50/Pg.-181 Breeder layer pen house -12.59 Hatchery building -8.37 Commercial growing pen house -3.76*4=15.04 Breeder growing pen house -3.76 Feed mill -3.32

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR It. No.- 26.33/Pg.-188 Breeder layer pen house -2.45 Hatchery building -1.56 Commercial growing pen house -1.01*4=4.04 Breeder growing pen house -1.01 Feed mill -0.89

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR It. No.- 27.01/Pg.-197 Breeder layer pen house -19.96 Hatchery building -19.55 Commercial growing pen house -13.25*4=53 Breeder growing pen house -13.25 Feed mill -9.44

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR It.No. - 27.05/Pg.-197 Breeder layer pen house -7.8 Hatchery building -47.12 Commercial growing pen house -3.28*4=13.12 Breeder growing pen house -3.28 Feed mill -34.73

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. SSR It. No. - 27.06/Pg.-197 Breeder layer pen house -4.2 Hatchery building -189.3 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -00

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR It. No. - 32.04/Pg.-209 Breeder layer pen house -33.54 Hatchery building -326.92 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -77.48

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR It. No. - 32.11/Pg.-209 Breeder layer pen house -22.51 Hatchery building -471 Commercial growing pen house -13.74*4=54.96 Breeder growing pen house -13.74 Feed mill -151.86

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. SSR It.No.- 35.25/Pg.-225 Breeder layer pen house -22.51 Hatchery building -471 Commercial growing pen house -13.74*4=54.96 Breeder growing pen house -13.74 Feed mill -151.86

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR It. No.- 39.01/Pg.-245 Breeder layer pen house -0.12 Hatchery building -0.04 Commercial growing pen house -0.04*4=0.16 Breeder growing pen house -0.04 Feed mill -0.04

Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) SSR It.No. - 39.04/Pg.-245 Breeder layer pen house -7.56 Hatchery building -2.52 Commercial growing pen house -2.52*4=10.08 Breeder growing pen house -2.52 Feed mill -2.52

Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. SSR It.No. - 23.03 Breeder layer pen house -0.29 Hatchery building -0.00 Commercial growing pen house -0.25*4=1 Breeder growing pen house -0.25 Feed mill -0.08

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR It.No. - 23.02 Breeder layer pen house -1.3 Hatchery building -0.00 Commercial growing pen house -0.47*4=1.88 Breeder growing pen house -0.47 Feed mill -0.4

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). SSR It.No. - 38.04 Breeder layer pen house -300 Hatchery building -252 Commercial growing pen house -167*4=668 Breeder growing pen house -167 Feed mill -100

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). SSR It.No. - 38.05 Breeder layer pen house -24 Hatchery building -27 Commercial growing pen house -18.29*4=73.16 Breeder growing pen house -18.29 Feed mill -18.24

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. SSR It.No. - 46.39 Breeder layer pen house -216 Hatchery building -0.00 Commercial growing pen house -158.48*4=633.92 Breeder growing pen house -158.48 Feed mill -38.28

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. SSR It No.- 32.34/Pg.-212 Breeder layer pen house -33.54 Hatchery building -326.92 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR It. No. - 26.05/Pg.-184 Breeder layer pen house -0.00 Hatchery building -0.45 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. SSR It. No. - 32.34/Pg.-212 Breeder layer pen house -0.00 Hatchery building -326.92 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Breeder layer pen house -0.00 Hatchery building -98.47 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR It. No. - 33.26/Pg.-215 Breeder layer pen house -0.00 Hatchery building -8.91 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite SSR It.No.- 33.22/Pg.-215 Breeder layer pen house -0.00 Hatchery building -9.60 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. SSR It.No.- 36.13/Pg.-228 Breeder layer pen house -0.00 Hatchery building -326.92 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box SSR It. No.-39.43/Pg.-254 Breeder layer pen house -0.00 Hatchery building -11.52 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR It.No. - 39.09/Pg.-246 Breeder layer pen house -0.00 Hatchery building -14.70 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR It.No.40.01/Pg.-264 Breeder layer pen house -0.00 Hatchery building -11.52 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR It.No. - 23.01 Breeder layer pen house -0.00 Hatchery building -1.23 Commercial growing pen house -0.00 Breeder growing pen house -0.00 Feed mill -0.00

ROYALTY CHARGES

Royalty for Sand

Royalty for murum and Other material

QUALITY CONTROL & LAB TESTING

Std.Consistency , Fineness , Specific Gravity , Setting Time Initial & Final , Setting Time , compressive strength , Soundness

M-10 -concrete cube compressive strength (set of 3 cubes)

M-20 Mix Design With all tests on basic material

Compressive Strength (set of 3 cubes)

Metal-Water absorption,specific gravity,impact value,crushing value

Metal- gradation

Metal- Combined flakiness & elongation of single meter

Brick Crushing value,water absorption & Specific gravity

Yield stress,Ultimate tensile stress,Elongation,Weight per running meter,Bent / rebend test (set of 3 bar)

Fineness modulus silt contest

Murum- Plasicity index

Field density of compacted layer

Murum- Proctor test

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

MV Constructions LLP (BID ID -6342603)