REPAIR TO WOODEN, ALUMINIUM, STEEL JOINERY AND CONNECTED WORKS IN C2B AREA AND REPAIR/ MAINT AND IMPROVEMENT OF MAIN DISTRIBUTION BOARDS, SUBMAIN WIRINGS, BUILDING STREET LIGHTS, BUILDING EARTHINGS, MCBS AND OTHER INTERNAL ELECTRICAL FITTINGS AND FIX

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5sqm but not exceeding 4sqm all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm all as directed.

Taking down shutters of any description exceeding 1.0sqm and not exceeding 2.0sqm each all as directed.

S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (Nominal mix) using 20mm graded stone aggregate as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick all as directed.

M&L for PCC M-10 grade (Nominal mix) using 12.50 mm graded stone aggregate for filling in pressed steel door frames all as directed.

S&F 35mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides all as directed.

S&F 35mm thick IInd class Hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

M&L for preperation of new primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodised.

S&F 200mm aluminium anodised, barrel tower bolts of extruded section.

S&F 250mm aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with tinned tacks, or stainless steel wire staples.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.

S&F 100mm butt hinges, Stainless steel with galvanised mild steel hinge pin anodised type B-21.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed in the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, all as directed by Engineer -in -charge.

S&F aluminium powder coated (powder coating shall not be less than 50 micron with approved colour) window sliding type (3 track) with frame size 100x35x1.2mm and shutter 39.40x17.70x1.2mm with two glass shutter & one mesh shutter incl necessary jointing cleats cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with 4mm plain float glass & 0.56mm dia SS wire mesh, fitting etc complete all as specified. Note :- Unit rate is deemed to include cost of wire mesh & 5 mm thick glazing.

S&F aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc including taking down existing steel ventilators all as directed by Engr-in-Charge. Note :- Unit rate is deemed to include cost of wire mesh & glazing.

S&F steel window (any nos of shutters) with side hung double shutters one receive gauge including projecting type hinges with steel handle, and steel peg stay complete with MS grill of 12mm dia bar and glazing bars/without glazing bars with a shop coat of red oxide primer all as directed by Engr-in-Charge.

S&F in repairs 18mm thick Celuka ply of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by Engr-in-Charge.

S&F in repairs 18mm thick Celuka ply of one side prelaminated with decorative lamination, and other side plain white colour to make kitchen cabinet/ drawer shutters complete as per specifications and as directed by Engr-in-Charge.

S&F in repairs 12mm thick Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make wall mounted kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by Engr-in-Charge.

S&F in repairs auto closing hinges 35mm of 0 crank ( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, Make :-KAFF / Godrej / Hettich

S&F in repairs ball bearing runners 45mm Telescopic (KTS-20) full extension load capacity 50 kgs. Make :- KAFF / Godrej / Hettich

S&F in repairs magnetic catcher (KTS-20) full extension load capacity 8Kgs. Make :- KAFF / Godrej / Hettich

S&F in repairs stainless steel handles 100mm size for kitchen cabinet shutters

S&F stainless steel 304 grade kitchen modular baskets for storage of plates, cups, grain basket, glass cutlery, bottles etc as per required size all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/ blankets, any thickness, including cover fillets.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L 4mm thick designer non-asbestos fibre cement building board having fire resistance & mosture resistance properly. Make :- Everest, fixed on aluminium grid with screws complete all as specified and directed.

S&F PVC Wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawing

S&F 5mm thick PVC Sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

Taking down aluminium shutter of any size and refixing after rescurring the pivot/hinges, oiling, adjusting floor spring providing packing if required complete all as specified.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.410-0 or 310-0.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with tinned tacks, or stainless steel wire staples to wooden/steel shutter.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with aluminium beading and screws to aluminium window shutters.

S&F in repairs 4mm thick sheet glass ordinary quality exc 0.50sqm but not exc 1.00sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws in aluminium windows.

S&F in repairs 3mm thick pin headed/figured /frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc 0.5sqm in each pane.

M&L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handle, etc. all as sepcified and directed.

S&F in repairs for MS Butt hinges 100mm cold rolled mild steel medium weight fixed to MS pressed steel chowkhats including necessary welding and making good of damaged portion etc. all as sepcified and directed.

S&F in repairs aluminum extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed all as sepcified and directed.

Taking down old unserviceable/burnt sub main wiring of any size including earth wire and making good to the disturbed surfaces and removing the material from site complete all as directed.

Material and labour for submain wiring along with earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawn in and including concealed rigid non metallic PVC conduit medium grade, ISI marked ivory colour alongwith accessorirs of following sizes in 25 mm dia PVC conduit all as directed.

2x2.5 Sqmm + 1x2.5 Sqmm (earth).

2x4 Sqmm + 1x4 Sqmm (earth).

2x6 Sqmm + 1x6 Sqmm (earth).

Material and labour for submain wiring along with earth continuity conductor with PVC insulated FRLS multi stranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawn in existing concealed rigid non metallic PVC conduits of following sizes:

2x4 Sqmm + 1x4 Sqmm (earth).

2x6 Sqmm + 1x6 Sqmm (earth).

Taking down unserviceable MCB distribution boards with incoming and outgoing controls any make and capacity after disconnecting of electric connections complete all as directed.

S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed.

S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 8 way with 100 Amps rated copper bus bar, type complete all as directed.

S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 12 way with 100 Amps rated copper bus bar, type complete all as directed.

S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 16 way with 100 Amps rated copper bus bar, type complete all as directed.

Taking down unserviceable MCBs of any make and capacity after disconnecting of electric connections complete all as directed.

S&F MCB triple pole and neutral 240 volts, C series of capacity 63 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

S&F MCB Single pole and neutral 240 volts, C series of capacity 6 to 32 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

S&F MCB Single pole and neutral 240 volts, C series of capacity 6 to 20 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

Disconnecting electric connection and taking down old unserviceable electric meter from existing location and depositing MES store yard. Note :- Old unservicebale electric energy meter Srl No last reading and dated of dismantling with qtr No to be kept on record and intimated to JE E/M IC before installing new meter.

S&F microprocessor based single phase electronic tamper proof energy meter of rating 10 to 60 amp with optical communication port, conforming to IS 13779. Make :- Secure or equivalent make given under list of makes

S&F microprocessor based AC three phase static energy meter of accuracy class 1.0, 3x240V, 50 Hz with optical port and with backlit LCD display of rating 20 to 100 amp. Make Secure or equivalent make given under list of makes.

Dismantling the existing unserviceable earthing of any type and Material and labour for renewal of same complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 6mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Dismantling the existing unserviceable earthing of any type and Material and labour for renewal of same complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI strip of size 32x6 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit), PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in earth pit including 40mm thick RCC cover with reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 6mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Supplying and fixing LT panel out door type made out of CRCA MS sheet of 3.15 mm thick with alluminum busbar, duly powder coated & mounted on angle iron frame made out of size 50x50x6mm, 90 cm high consisting of the following accessories:- (i) MCCB TPN 415 volts 160 Amp, 25 KA adjustable type ---01 Nos (For incoming) (ii) MCB SPN 230 volts 63 Amp, 10 KA - 04 Nos (for outgoing) (iii) Enclosure for mounting single phase KWH electric meter - 04 Nos (for outgoing) (iv) LED indicating lamp cluster type set of three colour in RED/BLUE/ GREEN- 01 Sets complete. (v) Digital multifunction meter with volmeter (0-500V), Ampmeter (0-250) & frequency meter- 01 Nos complete. (vi) Grouting of panel 60cm above GL, embedded in PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate up to 30 cm complete.

S&F LT panel out door type made out of CRCA MS sheet of 3.15 mm thick with alluminum busbar, duly powder coated & mounted on angle iron frame made out of size 50x50x6mm, 90 cm high consisting of the following accessories:- (i) MCCB TPN 415 volts 100 Amp, 25 KA adjustable type ---01 Nos (For incoming) (ii) MCB SPN 230 volts 63 Amp, 10 KA - 04 Nos (for outgoing) (iii) Enclosure for mounting single phase KWH electric meter - 04 Nos (for outgoing) (iv) LED indicating lamp cluster type set of three colour in RED/BLUE/ GREEN- 01 Sets complete. (v) Digital multifunction meter with volmeter (0-500V), Ampmeter (0-250) & frequency meter- 01 Nos complete. (vi) Grouting of panel 60cm above GL, embedded in PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate up to 30 cm complete.

S&F in replacement LED Bulk Head with PDC aluminium housing and milky diffuser capacity 10 Watt complete including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make :- Cat part No LTB10WLED in C&S or equivalent in Philips/Osram.

S&F in replacement building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 25 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Make :- Cat part No LTESSI25WLED in C&S or equivalent in Philips/Osram.

S&F in replacement building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 30 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Make:- Cat part No LTESSI30WLED in C&S or equivalent in Philips/Osram.

S&F integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 4 ft white complete of capacity 1x20 Watt including making electrical connections with twin core twisted flexible copper wire of suitable size all as directed. Make:- Cat Part No LTTB4F20WLED/W in C&S or equivalent in Philips/Osram.

S&F integrated type LED tube light fitting, indoor decorative polycarbonate housing extruded T-5, 4 ft white complete of capacity 1x20 Watt including making electrical connections with twin core twisted flexible copper wire of suitable size all as directed. Make:- Cat Part No LTTB4F20WLEDEW in C&S or equivalent in Philips/Osram.

S&F Aesthetically designed 2'x2' LED recess mounting extruded aluminum housing Flat panel, soft-light and glare free symmetrical illumination of capacity 45 Watts. Make:-C&S Cat part No LTCRP45WLED2X2 or equivalent make in Philips, Crompton.

S&F LED round recess, aluminum housing slim down light fitting of capacity 09 Watts. Make:-C&S Cat part No LTCRSLM9HPLEDRND/W or equivalent make in Philips, Crompton.

S&F LED round recess, aluminum housing slim down light fitting of capacity 12 Watts. Make:-C&S Cat part No LTCRSLM12PLEDRND/W or equivalent make in Philips, Crompton.

S&F LED round recess, aluminum housing slim down light fitting of capacity 15 Watts. Make:-C&S Cat part No LTCRSLM15PLEDRND/W or equivalent make in Philips, Crompton.

Supply & fixing indoor wall mounted fitting with LED retrofit bulb of capacity 09 watts all as directed at site. Make:-Philips Cat Part No. 919215850070 or equivalent make in Crompton.

Supply & fixing in replacement LED indoor wall mounted fitting all as directed at site. Make:- Philips Cat Part No. 919215850349 or equivalent in Crompton/ C&S.

Supply & fixing in replacement LED indoor wall mounted fitting all as directed at site. Make:- Philips Cat Part No. 919215850796 or equivalent in Crompton/ C&S.

Taking out old unserviceable/burnt LT UG cable of any size including and making good to the disturbed surfaces and removing the material from site complete all as directed.

Excavating in trenches for laying under ground cable, erection of poles and stays or laying cable etc in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed by Engr–in–charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

Supplying and laying un-reinforced precast concrete cable cover class LV type 1 with peak size 250 mm x 150 mm x 40 mm complete all as directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed including taking out the old burnt out cables all as directed of following sizes :-

16 Sqmm 4 core.

16 sqmm 2 core.

25 Sqmm 4 core.

10 Sqmm 4 core.

B S ENTERPRISES

Ms Kamal Kant Agarwal

M/s Aditya Enterprises