Supplying/ Errection/ Testing and Commissioning of 63 KVA Pole Mounted Distribution substation along with tapping point and HT line with in the premises of Labour Sarai at Industrial Growth Centre Samba Phase-II

Amount

Supplying/Errection/Testing/ Commissioning of 100 KVA Distribution Substation S/E/T/C of 63 KVA Distribution substation in the premises of Labour Saraiat Industrial Growth Centre Samba Phase-IIIconsisting of following components- 63 KVA Distribution Transformer 11/0 433 KVA 3 energy Level-2 Aluminium wound with filling of fresh etc. as required- 1 No. P/F of steel tubular pole 410-SP-33(11mtr) the pole shall be amount which shall be painted with red oxide & two coats of simmer paint cemented upto 5 feet in the ratio of 1:3:6 with 1 feet of Muff above the grand level with surface plastering etc. as required - 2 Nos. Gapless surge arrester 9 KV, 10KV L.A with polymer/ porcelain Housing station type- 1Set 11 KV G.O AB Switch 3 3 pole 400A – 1 Set 11 KV DO fuse 3 phase 400 Amp – 1 Set 11 KV Disc insulators (Polymer/ Porcelain) complete with fitting (45 KN) – 3 No. GI Chanel/ Angle/ Flat of size including damps – 200 Kg. 11 KV Pin insulators (polymer/porcelain) with pins (5 KN) – 3 No. Galvanized stay set with 50 x8 mm stay clamp, guy insulator (2 Nos), Anchor plate ( 200x 200 x 6 mm) Nut Bolts 2 No. turn Buckles 1.8m long 16 mm Dia meter solid GS stay rod 2 7/3.15 mm Dia GI stranded wire complete -2 Set. Wedge connector/ PG clamps – 6 Nos. P/F of 1x120Sqmm unarmored Aluminium cable with thiumbling to end terminals – 15 Mtr. Galvanized Nut & Bolts – 8 Kg. Danger plate with clamp – 1 No. G.I Barbed wire for Anti climbing- 15 Kg. 3 Phase & 4 wire meter Approved by PDD– 1 Job. P/F of 0.05 ACSR Conductor – 10 Mtr P/L of Chemical Earthing– 3 Nos. P/F of 25 x 5 mm G.I strip on surface or in recess for connection etc as required. Sundry items like Aluminium lugs, Jumpess Binding tape etc - LS P/F of fuse link Bus Bar on Angle iron for protection of transformer – 1 No. Misc. items required as per site Requirement Etc

Tapping Point along with HT line Line:- Providing and fitting of Tapping point for connecting/disconnecting the distribution substation along with HT line comprising of following items:- a) ASCR conductor (Rabbit) -330mtr. b) Steel tubular poles 410 SP33 (11Mtr)-5No c) Pin Insulator -15no d) Disc insulator-12no e) GO switch 400Amp-1no f) Channel 100x50mm 4ft for fixing of insulator-3no g) Angle iron arm 50x4mm 4ft-6no h) Clamps-6no i) Nut bolts -50kg j) Guard netting for 100mtr HT line-1job k) Chain link fencing (7ftx7ftx5ft) (LxBxH) supported with angle iron and making door for Entrance. Complete with grouting with cement concreate painting and welding etc l) Misc. items required as per site requirements

VEE GEE ENGINEERS

M/S VISHAL DOGRA

JAI VIJAY INFRASTRUCTURE COMPANY