REPAIR AND PAINTING OF STEEL FURNITURE OF AREA-I AND AREA-II UNDER GE SAUGOR

Amount

ALMIRAH LARGE STEEL FD-67,67(M), 104,339, 351,1031, 1033, FD/E6/ MAP/18

Removing of old U/s door handle and S&F new mild steel chromium plated door handle with nut & bolt as per drg.

Removing of old U/s bottom legs and S&F new one bottom leg duly painted as per drg.

Removing of old U/s door lock and S&F new door lock with duplicate keys as per drg. Make of lock : Harrison/ Godrej/ Link

Removing of old U/s locks of Almirah (MAP) from drawer / locker and S&F new lock as per drg. Make of lock : Harrison/ Godrej/ Link

Removing of old U/s three way locking assy with rods and S&F three way locking assy with rods and making functional, complete all as shown on drawing and as directed.

Removing of old U/s shelve and S&F new shelve made to shape and size all as per drg.

Removing of old U/s one door shutter and S&F one new door shutter made to shape and size all as per drg.

M&L for Adjustment of the existing loose/disturbed shelves by providing new clamps removing unserviceable clamps all as directed.

M&L for replacement of existing U/s socket of hanging rod of Almirah HHHS and S&F new socket all as per drg.

M&L for replacement of existing U/s hanging rod and S&F new hanging rod all as per drg.

M&L for spray painting of synthetic enamel paint dual tone/smoke grey/hammer tone/colour shade as approved by GE over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

ALMIRAH MEDIUM STEEL FD-67(M),104,110, 243,343,1032 ,1034

Removing of old U/s door handle and S&F new mild steel chromium plated door handle with nut & bolt as per drg.

Removing of old U/s bottom legs and S&F new one bottom legs duly painted as per drg.

Removing of old U/s door lock and S&F new door lock with duplicate keys as per drg. Make of lock : Harrison/ Godrej/ Link

Removing of old U/s door lock assembly recessed type and S&F new door lock assembly recessed type with duplicate keys as directed by Engr-in-charge. Make of lock : Harrison/ Godrej/ Link

Removing of old U/s three way locking assy with rods and S&F three way locking assy with rods and making functional, complete all as shown on drawing and as directed.

Removing of old U/s shelve and S&F new shelve made to shape and size all as per drg.

Removing of old U/s one door shutter and S&F one new door shutter made to shape and size all as per drg.

M&L for Adjustment of the existing loose/disturbed shelves by providing new clamps removing unserviceable clamps all as directed.

M&L for replacement of existing U/s socket of hanging rod of Almirah HHHS and S&F new socket all as per drg.

M&L for replacement of existing U/s hanging rod and S&F new hanging rod all as per drg.

M&L for spray painting of synthetic enamel paint dual tone/smoke grey/hammer tone /colour shade as approved by GE over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

LOCKER STEEL FD- 127,257, 1029, CWE/BPL/SKD-562,TP

Removing of old U/s bottom leg and S&F new one bottom leg duly painted as per drg.

Removing of old U/s Hasp & staple and S&F new MS Hasp & staple chromium plated all as per drg.

Removing of old U/s bow handle ro lever handle and S&F new MS bow handle chromium plated all as per drg.

Removing of old U/s medial horizontal shelve and S&F new one medial horizontal shelve made to shape and size all as per drg.

Removing of old U/s one door shutter and S&F one new door shutter made to shape and size all as per drg.

M&L for replacement of existing U/s socket of hanging rod and S&F new socket all as per drg.

M&L for replacement of existing U/s hanging rod and S&F new hanging rod all as per drg.

M&L for spray painting of synthetic enamel paint dual tone/smoke grey/hammer tone (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

BED HARD STEEL MAP FD/E6/MAP/08 (R )

Taking out old U/s top of plywood and S&F new top of plywood 12 mm thick 7 ply commercial BWR grade ISI Marked complete all as shown in drg and as directed. (Make: Century Ply/Archid ply/Green Ply/Kitply)

Taking out old U/s particle board of footrest and S&F new particle board of footrest made of 18/19 mm thick prelaminated particle board exterior grade (Make: GreenPly /Century Ply/ Action Tesa) colour and shade as approved by GE.

All as per srl items No 4.02 above but for headrest of Bed hard Steel.

Taking out old U/s rusted long rail and S&F new long rail made out of MS rectegular pipe size as per drg duly painted without distrubing shaape and size of charpoycomplete all as per drg.

Taking out old U/s rusted short rail in head / foot rest and S&F new short rail in head / foot rest made out of MS rectegular pipe size as per drg duly painted without distrubing shaape and size of charpoy complete all as per drg.

Taking out old U/s rusted leg and S&F new leg made out of MS square pipe size as per drg duly painted without distrubing shaape and size of charpoycomplete all as per drg.

M&L for taking out old U/s PVC Shoe and S&F new PVC shoe of best quality.

M&L of spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

CHARPOY IP HARDTOP MAP FD/MAP-II/01

Taking out old U/s top of plywood and S&F new top of plywood 12 mm thick 7 ply commercial BWR grade ISI Marked complete all as shown in drg and as directed. (Make: Century Ply/Archid ply/Green Ply)

Taking out old U/s rusted long rail and S&F new long rail made out of MS rectegular pipe size as per drg duly painted without distrubing shaape and size of charpoycomplete all as per drg.

Taking out old U/s rusted short rail and S&F new short rail made out of MS rectegular pipe size as per drg duly painted without distrubing shaape and size of charpoy complete all as per drg.

Taking out old U/s rusted leg and S&F new leg made out of MS square pipe size as per drg duly painted without distrubing shaape and size of charpoycomplete all as per drg.

M&L for taking out old U/s PVC Shoe and S&F new PVC shoe of best quality.

M&L of Spray painting of synthetic enamel paint (Colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

CHARPOY IP FOLDING PLYTOP FD-388 (R )

Taking out old U/s top of plywood and S&F new top of plywood 8/9 mm thick commercial BWR grade ISI Marked complete all as shown in drg and as directed.Make: Century Ply/Archid ply/Green Ply/Kitply

M&L for taking out old U/s PVC Shoe and S&F new PVC shoe of best quality.

M&L of Spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

CHARPOY GI PIPE PLYTOP FD-220

Taking out old U/s top of plywood and S&F new top of plywood 12 mm thick 7 ply commercial BWR grade ISI Marked complete all as shown in drg and as directed. Make: Century Ply/Archid ply/Green Ply/Kit Ply

Taking out old /unserviciable stiffner and S&F new stiffner of MS section 900mmx20mmx20mm x2mm with suitable semi circular nut bolts all as directed by Engr-in - charge. Before fixing stiffner shall be painted two coats with synthetic enamel black paint over a coat of red oxide primer complete all as specifed and directed.

Taking out old U/s long rail and S&F new long rail made out of GI pipe medium grade 32mm bore duly threaded to both ends complete all as per drg.

Taking out old U/s short rail and S&F short rail made out of GI pipe retrived against item srl No. 7.03 duly threaded to both ends complete all as per drg.

Taking out old U/s leg and S&F leg made out of GI pipe retrived against item srl No. 7.04 duly threaded complete all as per drg.

Taking Out old U/s GI Elbow and S&F new GI elbow 3 way of 32mm bore ISI marked, complete all as per drg.

Taking Out old U/s GI Checknut and S&F new GI checknut of 32mm bore ISI marked, complete all as per drg.

TABLE OFFICE OFFR/CLK STEEL FD- 84,381,1003,1004

Taking out old U/s top and S&F new top of made to shape out of 18/19mm thick prelaminated particle board exterior grade one side teak faced/melamine faced and other side white face with 4 mm thick teakwood edging all around all as per drawing.

Taking out old U/s drawer of table and S&F new drawer and making the same in functioning condition with necessary nuts, bolts, clips and washer, denting & welding etc all as spacified and as directed.

Taking out old U/s leg of table and S&F new leg complete all as per drg.

Taking out old U/s long rail/long stiffner of table and S&F new long rail/long. complete all as per drg.

Taking out old U/s short rail/ short stiffner of table and S&F new short rail/ short stiffner complete all as per drg.

Taking out old U/s shoe and S & F new hard rubber shoes of best quality as per drawing.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

TABLE 900x600x760MM STEEL WITH OR WITHOUT DRAWER FD- 1007, 1008

Taking out old u/s top and S&F new top of made to shape out of 18/19mm thick prelaminated particle board exterior grade one side teak faced/melamine faced and other side white face with 4 mm thick teakwood edging all around all as per drawing.

Taking out old U/s drawer of table and S&F new drawer and making the same in functioning condition with necessary nuts, bolts, clips and washer, denting & welding etc all as specified and as directed.

Taking out old U/s leg of table and S&F new leg. complete all as per drg.

Taking out old U/s long rail/long stiffner of table and S&F new long rail/long stiffner complete all as per drg.

Taking out old U/s short rail/ short stiffner of table and S&F new short rail/ short stiffner complete all as per drg.

Taking out U/s shoe and S & F new hard rubber shoes of best quality as per drawing.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

TABLE DINING ORs FD-165 (M)

Taking out old U/s top and S&F new top of made to shape out of 18/19mm thick prelaminated particle board exterior grade one side teak faced/melamine faced and other side white face with 4 mm thick teakwood edging all around all as per drawing.

Taking out old U/s leg of table and S&F new leg. complete all as per drg.

Taking out old U/s long rail/long stiffner of table and S&F new long rail/long complete all as per drg.

Taking out old U/s short rail/ short stiffner of table and S&F new short rail/ short stiffner complete all as per drg.

Taking out U/s shoe and S & F new hard rubber shoes of best quality as per drawing

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

TABLE 900X900X760MM STEEL FD-1009

Taking out old U/s top and S&F new top of made to shape out of 18/19mm thick prelaminated particle board exterior grade one side teak faced/melamine faced and other side white face with 4 mm thick teakwood edging all around all as per drawing.

Taking out old U/s leg of table and S&F new leg complete all as per drg.

Taking out old U/s long rail/long stiffner of table and S&F new long rail/long stiffner complete all as per drg.

Taking out old U/s shoe and S & F new hard rubber shoes of best quality, as per drawing.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

TEAPOY VERANDAH FD-35, 255,383,FD/E6/MAP/17

Taking out old u/s top and S&F new top of made to shape out of 18/19mm thick prelaminated particle board exterior grade one side teak faced/melamine faced and other side white face with 4 mm thick teakwood edging all around all as per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoes of best quality, as per drawing.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

TABLE COMPUTER FD/E6/MAP/03,SIMILAR PATTERN

Taking out old u/s top and S&F new top of made to shape out of 18/19mm thick prelaminated particle board exterior grade one side teak faced/melamine faced and other side white face with 4 mm thick teakwood edging all around all as per drawing.

S&F new keyboard shelf with telescopic channel of table computer all as per drawing.

S&F new drawer with telescopic channel of table computer all as per drawing.

S&F new hard rubber shoe of best quality, as specified and as shown on drg.

S&F new handle of drawer of best quality, as specified and as shown on drg.

TABLE BED SIDE STEEL(MAP) FD/E6/MAP/15 (R )

Taking out old U/s top and S&F new top of made to shape out of 18/19mm thick prelaminated particle board exterior grade one side teak face/melamine face and other side white face with 4 mm thick teakwood edging all around all as per drawing.

Taking out old U/s upper drawer of table bed side and S&F new upper shelve with telescopic channel all as per drawing.

All as per srl items No 14.03 above but for lower drawer of table bed side.

S&F new hard rubber shoe of best quality, as specified and as shown on drg.

S&F new MS handle cromium plated on both the drawers complete all as per drg.

Replacement of unserviceable/broken ply wood thickness of 6mm commercial ply for back side all as per drg. Make: Century Ply/Archid ply/Green Ply/Kitply

RACK SHOE STEEL MAP FD/E6/MAP/02 (R )

Welding of broken joints and denting of all irregular shapes at all side of make correct shape and size all as per drg.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

S&F new hard rubber shoe of best quality, as specified and as shown on drg.

RACK STEEL 3/5/6 SHELVES FD-129(M), 1023,1037, 1038, 1039,SIMILAR PATTERN

Welding of broken joints and denting of all irregular shapes at all side to make correct shape and size all as per drg.

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

BOOK CASE OPEN LARGE/SMALL STEEL FD-69(M), 90(M), 1028

Welding of broken joints with welding and denting of all irregular shapes at all side to make correct shape and size all as per drg.

Removing of old U/s door handle and S&F new mild steel chromium plated door handle/ PVC Reces hadle if required with nut & bolt as per drg.

Removing of old U/s door lock and S&F new door lock (set of 4 lock having same key) with duplicate keys as per drg. Make of lock : Harrison/ Godrej/ Link

M&L for spray painting of synthetic enamel paint (colour shade as approved by GE) over a coat of red oxide primer after preparation of surface by scrapping with sand paper/electric grinder, removing dust including denting as required all as specified and directed by Engr-in Charge.

dipangashu barick and associates (BID ID -3437306)

Budget Furniture Industries (BID ID -3436792)