Construction/Renovation of Bathroom at Laizbal Anantnag. P and AO OFFICE /KULGAM/BIJBEHARA

Amount

Demolishing of cement concrete manually/by mechanical means including disposal of material within 50 meters leads as per direction of Engineer-in charge: in 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work up to plinth level with 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)1*7.50*4.50*0.25=8.43 cfts or 0.238 cum

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work up to plinth level with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) 4.4 Quantity vide item no 2=0.238 Cum

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:4 (1 cement: 4 coarse sand)

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (18.1) SSR 22 = 01 n0

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (18.7)

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of tile 500x500 mm.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal Work-Exposed on wall 15 mm dia. nominal bore.

Supply and fixing of Angle values

Supply and fixing Bib Cocks

Supply and fixing Hand Jet

Supply and fixing Stop cock

Supply and fixing Acrylic set complete

Supply and fixing Soap case

Supply and fixing Towel Rod

Supply and fixing Wall Mixer SSR

Supply and fixing Gratings

Providing and fixing 100 mm dia PVC pipe

Providing and fixing 75 mm dia PVC pipe

Providing and fixing 100 mm door Tee/ Door bend/junction/P. bend

Providing and fixing 75 mm door bend/P. bend/door Tee/D junction

Providing and fixing 50 mm dia PVC pipe (Air Pipe)

Providing and fixing Collars of required Dia

Providing and fixing Floor Traps of sizes

Providing and fixing Cowel for air pipe

Providing and fixing PVC connections

Providing and fixing Main hole covers

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (nonmodular) bricks of class designation 7.5

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. With Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and fixing of 35 ltr capacity Geyser of standard make with all required fittings complete Job (LMR).

Providing of electricity facility to bath room with 1 no exhaust fan of standard makes complete job

RIYAZ AHMAD BHAT (BID ID -2349207)

SYED ALTAF HUSSAIN (BID ID -2349278)