AMP for the Year 2022 for Paughat Kot Kadaur road Km0/0 to 6250 VR

Amount

Providing and applying tack coat with rapid setting (RS-1) bitumen emulsion using emulsion distributor at the rate of 0.275 kg (point two seven five kilogramme) per square meter on the prepared dry and hungry grannular bituminous surface treated with primer cleaned with Hydraulic broom as per Technical Specification Clause 503 (five zero three) and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lift and other incidental charges.

Providing and laying bituminous macadam (BM) 50 (fifty) milimeter with hot mix plant using crushed stone aggregates of grading II / 19 (ninteen) milimeter nominal size ( 25-10mm @ 40%, 10-5mm @ 40% & 5mm & below (stone dust) @ 20% of volume of agreegate) premixed with bituminous binder / bitumen VG-10 @ 3.3% of total weight of mix, transported to site by tippers upto all lead laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specifications to achieve the desired compaction and density, complete as per MORD specificatons claous 504 (five zero four) including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and other incidental charges

Providing and laying bituminous concrete 30mm ( Thirty milimetres) thick with 100-120 (one hundred to one hundred twenty) TPH batch type hot mix plant producing an average output of 75 (seventy five) tonnes per hour using crushed stone aggregates of specified grading, premixed with bituminous binder @ 5.5% (five point five percent ) of total weight of mix, agreegate Grading II (thirteen milimetres nominal size) i.e. 13.2 - 10 mm 30% ( thirty percent), 10 - 5 mm 25% ( twenty five percent), 5 mm and below 43% ( forty two per cent ) of volume of agreegate and filler @ 2% ( two percent) by weight of Aggregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five zero nine) complete in all respects and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead, lift and other incidental charges.

Providing and applying thermoplastic compound 2.5 mm thick and road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser @ 250 gms ( two fifty grammes) per square meter area, thickness of 2.5 mm (two point five milimeters) is exclusive of surface applied glass beads as per IRC:35 (thirty five), propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. The finished surface to be level, uniform and free from streaks and holes completeas per MORTH specificatons including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and all incidental charges

kapoor sanjee