CANNING PAINTIING AND REPAIRS TO STEEL FURNITURE UNDER BSO OF GE SUKNA

Amount

Supply & replacement of following unserviceable items of Almirah steel (1270 x 765 x 440 mm)complete all as shown in drawing and as directed. (Drg No. - FD-67, FD-243 & FD-1032)

Chromium plated handle

Base made out of 1mm thick MS sheet channel with ends covered and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock 50 mm, 4 lever with duplicate keys

Shelf made out of 914 mm x 450 mm & 1 mm thick MS sheet and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Refixing of existing shutter / shelf with necessary welding as required

75 mm MS hinges and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Supply & replacement of following unserviceable items of Almirah small steel (1/2 Hanging & 1/2 Shelving) complete all as shown in drawing and as directed. (Drg No. - FD-114 & FD-1034)

Chromium plated handle

Base made out of 1mm thick MS sheet channel with ends covered and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock 50 mm, 4 lever with duplicate keys

Supply & replacement of following unserviceable items of Chair CB with / without arms complete all as shown in drawing and as directed. (Drg No. - FD-75)

Welding of seat frame with legs of chair CB without arms.

MS flat iron 25 x 3 mm of 50 mm length and including welding & spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Seat frame made out of teak wood and including two coats french polish and canning for chair CB with arms complete.

Back frame made out of teak wood and including two coats french polish and canning for chair CB with arms complete.

Seat frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete.

Back frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete.

Hand rest made out of teak wood and fixed with screws and including two coats french polish for chair CB with arms complete.

Fixing only existing serviceable arms with new screws and including one coat french polish for chair CB with arms complete.

Hard rubber shoes

Hard PVC caps.

Supply & replacement of following unserviceable items of Chair verandah complete all as shown in drawing and as directed. (Drg No. - FD-19 & FD-256)

Welding in joint of the seat frame with legs

Removing unserviceable plastic cane & including re-canning in true Godrej pattern with 1st quality 2 to 2.5 mm wide and half round oval shape virgin plastic cane of white colour. The border of seat / back shall be weaved with 4 mm wide 1st quality virgin plastic cane (white colour) complete all as specified and directed:- Note: The re-canning shall be carried out only after finishing painting of item as required.

Hard plastic shoes

Supply & replacement of following unserviceable items of Teapoy verandahcomplete all as shown in drawing and as directed. (Drg No. - FD-383)

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Hard rubber shoes

Supply & replacement of following unserviceable items of Chair CB with arms (Cushion padded seat & back) complete all as shown in drawing and as directed. (Drg No. - FD-75)

Seat made out of padded cushion with rexine cover.

Back made out of padded cushion with rexine cover.

Hand rest made of 2nd class hard wood frame & padded cushion with rexine cover.

Supply & replacement of following unserviceable items of Locker steel complete all as shown in drawing and as directed. (Drg No. - FD-257 & FD-1029)

Chromium plated handle

Legs made out of 1mm thick MS sheet and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Chromium plated hasp and staple of size 100 mm

300 mm long chromium plated hanging rod of 20 mm dia & 1.6 mm wall thickness

Lock with duplicate keys

Supply & replacement of following unserviceable items of table officers steel complete all as shown in drawing and as directed. (Drg No. - FD-1003)

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Long rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Short rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Drawer small and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Lock with duplicate keys

Hard plastic shoes.

Supply & replacement of following unserviceable items of Table clerk complete all as shown in drawing and as directed. (Drg No. - FD- 84 & FD-381):-

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Long rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Short rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Locks with duplicate keys

Hard plastic shoes

Supply & replacement of following unserviceable items of charpoy GI pipe complete all as shown in drawing and as directed. (Drg No. - FD-220)

Charpoy top made out of 12 mm thick plywood, BWR grade

Stiffner made out of 40 x 6 mm MS flat iron of 85 cm (+/- 2 cm) length with three holes of required size and including necessary screws / nuts, bolts & including spray paint with 2 coats of synthetic enamel paint over a coat of primer complete.

Long rail made out of 32 mm dia GI pipe of class B quality.

Fixing short rail made out from 32 mm bore GI pipe obtained from old long rail and including dismantling old short rail. Note:- Serviceable quantity of GI pipe obtained from dismantling of long rail shall be reused under this item by cutting the same to length of short rail.

Fixing legs made out from 32 mm bore GI pipe obtained from old short rail, supply and welding of 3 mm thick and 50 mm dia MS base plate at bottom of leg, 2 Nos. 25 x 3 mm flat iron made to shape of 15 mm dia clamp & welded to face of leg, one 16 gauge washer welded to bottom of lower clamp for fixing MNF set and including painting clamp & base plate with two coats of synthetic enamel paint over a coat of red oxide primer & dismantling old leg. Note:- Serviceable quantity of GI pipe obtained from dismantling of short rail shall be reused under this item by cutting the same to length of legs.

GI elbow 3 way suitable for 32 mm bore GI pipe rails

GI check nut 6 mm thick suitable for 32 mm bore GI pipe

Hard wood block for legs made out of 2nd class HW.

M&L preparation of old painted steel surfaces of any description, width or girth, and including spray paint with one coat of synthetic enamel paint of approved colour for the following furniture items complete all as specified and directed:-

Almirah steel (1270 x 765 x 440 mm) (Drg No. - FD-67, FD-243 & FD-1032)

Almirah small steel (1/2 Hanging & 1/2 Shelving) (Drg No. - FD-114 & FD-1034)

Almirah large steel with shelves (Drg No. - FD-67 7 FD-1031)

Book case steel (Drg No. - FD-90, FD-1028)

Book shelf open (small) steel (Drg No. - FD-69)

Book shelves open (large) steel (Drg No. - FD-69)

Locker steel (Drg No. - FD-257, FD-1029)

Rack stationery steel (Drg No. - FD-81)

Rack steel 1830 x 760 x 1905 (Drg No. - FD-129)

Table with drawer steel 900 x 600 x 760 (Drg No. - FD-1008)

Table clerk (Drg No. - FD-381)

Table officers steel (Drg No. - FD-84, FD-1003)

Table Marble top steel (900 x 900 x 760) (Drg No. - FD-1014)

Table for typing steel (Drg No. - FD-1006)

Trestle store room steel (Drg No. - FD-1043)

Chair CB without arms (Drg No. - FD-75)

Chair CB with arms (Drg No. - FD-75)

Chair CB with arms (Cushion padded seat & back) (Drg No. - FD-75)

Chair Verandah (Drg No. - FD-19, FD-256)

Teapoy verandah (Drg No. - FD-383)

M/S B K ROY

M/S K P S CONSTRUCTIONS