Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹2.4 L
Closing Date
17 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
ENGG
3 conditions · 2 needing a document upload
5.3 Financial Eligibility Criteria 5.3.1 The tenderer must have minimum average annual contractual turnover of V/N or "V";whichever is less, where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Appendix- 5 along with the copies of Audited Balance Sheet duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
5.2 Technical Eligibility Criteria 5.2.1 The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any Pway work involving rail renewal work with 52 kg/60 kg, 260 m long rail panels
7 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Submission of signed copy of Integrity Pact
Statement of similar nature of works executed as per proforma in Appendix 2 of tender document
Submission of contractual receipts as per proforma in Appendix 5 of tender document
Submission of undertaking as per proforma in Appendix 11 of tender document
Submission of affidavit as per proforma in Appendix 12 of tender document
Format for certificate to be enclosed/uploaded by bidder as per Appendix 21 of tender document
Rail renewal for 26 Track Kms (TKM) length with 52 kg 260m rail panels at identified stretches under Senior Regional Engineer, Ratnagiri section from Km 0/800 to 378/100 in Maharashtra state. (Computer no.69832 Rate quoted shall be excluding GST. GST shall be payable as applicable)
KR-W-1-58-2025-28
KR-W-1-58-2025-28
Open
Works - General
3 Months
Navi Mumbai, Maharashtra
₹0
₹2.4 L
17 Mar 2026
23 Feb 2026
3 Mar 2026
29 items across 10 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Cutting/End cropping of 52 Kg rails. Dismantling and removing the existing 52 kg rail panel upto a length of 260 mtr. with fittings and fastening and keeping away from the site of work without causing any infringement to the railway track as directed by engineer-in-Charge or his representative and laying newly prepared rail panel, interchanging rails east to west as needed including removing the elastic rail clips, inserts and liner seat on rail, liners, rubber pads and refixing elastic rail clips etc. including aligning, levelling and correcting the gauge in traffic block conditions, to keep rail panel at nominated location after dismantling with all lead and lift etc. complete as directed by Engineer-in-Charge (All labours and tools to be supplied by the tenderer/contractor only at his own cost) including greasing of pandrol clips inside portion of inserts and proper seating of MS/SF liners, GR pads on the rail. (Note : Payment of this item shall be made per Rmt. of newly laid rail panel which includes dismantling of existing rail panel and after replacing the same as TRR.)Dismantling and removing the existing 52 kg rail panel upto a length of 260 mtr. with fittings and fastening and keeping away from the site of work without causing any infringement to the railway track as directed by engineer-in-Charge or his representative and laying newly prepared rail panel, interchanging rails east to west as needed including removing the elastic rail clips, inserts and liner seat on rail, liners, rubber pads and refixing elastic rail clips etc. including aligning, levelling and correcting the gauge in traffic block conditions, to keep rail panel at nominated location after dismantling with all lead and lift etc. complete as directed by Engineer-in- Charge (All labours and tools to be supplied by the tenderer/contractor only at his own cost) including greasing of pandrol clips inside portion of inserts and proper seating of MS/SF liners, GR pads on the rail. Transportation of welded panels upto 260m in length by dragging on contractor's rollers placed on cess with all contractor's labours, tools and plants, equipments etc. complete as directed by Engineer-in-Charge. | — | — | — | Below/Pa |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TDRailRenewal26Km23-02-2026.pdf
ATTACHMENT
JPOforundertakingdiggingworkinthevicinityofSigElectandTelcommcables17.07.2023.pdf undertaking
ATTACHMENT
LocationUnloadingRNsection.pdf
ATTACHMENT
JPOforundertakingdiggingworkinthevicinityofSigElectandTelcommcables17.07.2023.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .