repairing of cross regulator at km. 2.100 of noida main drain adjacent to yamuna river near sector-168 noida in District Gautam budh nagar.

Amount

Fabricating and 3Phase sq cage ind motor replacement for Gates oprating system of other required materials, labour and T&P required for proper completion of work.

Fabricating and decking on super structure by MS chequred plate 6mm thick after cutting old and damaged Plateform and measuring, marking, cutting by gas, making holes if required in chequred plate to the size as per requirment to site shifting of chequred plate from ground to super structure Plateform and welding by diesel generating set, including cost of gas electrodes and other required material labour and T&P required for proper completion of work.

Fabricating and erection of superstructure railling for requlator by ms channel,angle,jali and measuring, marking, cutting by gas, for size as per requirement to site, and welding by diesel generating set, including cost of electrodes and other required materials, labour and T&P required for proper completion of work.

New Making damaged/broken teeth of drum gear by lifting hoist system, damaged teeth chiseling, drilling holes in old drum gear for making threads fixing studs, welding with cast steel/cast iron electrodes for making new teeth chipping grinding and finishing as per required size and shape including cost of material labour other required T&P etc.

Greasing of Rollers of gate after cleaning, replacing grease nipple, stud/ cap as required including cost of all material, labour and T&P etc for proper completion of work for a job/No.

Reparing of guide roller (side sway roller) by taking our defective guide roller from gate. Rethreading of foundation hole after extrancting broken foundation bolts. Repairing of pin by remetaling by welding, machining of roller shaft assembling the guide roller and fitting on gates with new foundation bolt and new rubber bushes and necessary oiling and greasing including cost of all material, labour, T&P test and trial etc required 1 for proper complletion of work

Painting of superstructure of gate by applying I coat of red oxide zinc chromate primer and 2 coat of high glass synthetic enamel phiroza blue paint of standard make after proper cleaning, scarping the surface including cost of all material, labour T&P and scaffolding bridges with proper safety arrangement as required for proper completion of work.

Greasing oiling of component of lifting mechanism of gates (excluding rollers) after proper cleaning with replacing Grease cup/Grease Nipple as required including cost of all material, labour and T&P etc. required proper completion of work.

Painting on old rusted steel surface of gates and appurtenances after preparation of surface properly by sand blasting process and applying two coat of Zinc Rich primer and two coat of solvent less epoxy Paint including cost of all material, labour T&P and scaffolding required for proper completion of work.

Replacing of musical note type side rubber seal as per IS code 11855 by removing old damaged side rubber seal from gate, scraping & cleaning surface, making holes feding and clamping the M.S plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per requirement of site including cost of all material labour and T&p required for proper completion of work.size 120 X 12mm note dia 45mm

Replacing of bottom rubber seal as per IS code 11855 by removing old damaged side rubber sea from gate, scraping & cleaning surface, making holes, fixing and clamping the M.S plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per requirement of site including cost of all material, labour and T&p required for proper completion of work. For size 80X20 mm

Applying cardium compound on steel wire rope, teeth of drum gear and pinion of gate after proper cleaning including cot of all materail, labour, T&P and scaffolding with safety arrangement required for proper completion of work

Finishing with Deluxe Multi surface paint system for exteriors using Primer as per manufacturers specifications including cost of all materail, labour, T&P and scaffolding with safety arrangement required for proper completion of work

Providing and fixing precoated Galvanised iron profile sheets 0.50mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns.

Raghvienterprises (BID ID -4378382)