Construction of Road and Drain at Kh.No. 1195 and 1196 near Dhanshree Vatika Revenue Village Bhuwana. 7705

Item Code [2022 1.6]:Item Type [building] :: Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil

Item Code [2022 3.1.1 M20]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Item Code [2022 3.1.4 M10]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Item Code [2022 4.1 new]:Item Type [building] :: Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix

Item Code [2022 4.13.3]:Item Type [building] :: Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code)

Item Code [2022 4.6.1]:Item Type [building] :: Add extra for providing richer mixes respectively at all floor levels Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix.

Item Code [2022 4.9 new]:Item Type [building] :: Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc

Item Code [2025 5.1 ii]:Item Type [road] :: Providing and applying primer coat with Bitumen emulsion (SS-1 ) on prepared surface of granular base (Stablised soil baes / Crusher Run Macadam) including cleaning of road surface and spraying primer at the rate of 0.90-1.2 kg /sqm using mechanical means as per MoRTH Specification Clause 502.

Item Code [2025 5.3 ii]:Item Type [road] :: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500-7 premixed with bituminous binder ,transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade ,level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504.

Item Code [2025 5.8 type A ii]:Item Type [road] :: Providing, laying and rolling of close- graded premix surfacing material of 20mm thickness composed of 11.2 mm to 0.9mm (Type-A) or 13.2 mm to 0.9mm (Type-B) aggregates using Viscosity grade bitumen to required line ,grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant,laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per MoRTH Specification Clause 508 By Mechanical Means Type A Bitumen (VG-30)

Item Code [B 2022 4.9]:Item Type [building] :: Centering and shuttering with steel plates/ plywood sheet including strutting, propping bracing both ways and removal of formworks for foundation, footings, straps beams,raft, bases of columns etc.

Item Code [BSR 2022 11.3.1]:Item Type [road] :: Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm thick nominal size aggregate.

Item Code [road 2025 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160"C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.

Item Code [road 2025 3.14]:Item Type [road] :: Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads ,transporting to site,spreading ,grading to required slope and compacted to meet requirement of Table300-2 with lead upto 50 m as per MoRTH Specification Clause 305.3

Item Code [road 2025 4.6]:Item Type [road] :: Providing ,laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (PugMill), carriage of mixed material by tipper to site ,laying in uniform layers in sub-base/base course on a well prepared sub- base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion ,etc as per Tables 400-12&400-13 and MoRTH Specification Clause 406. By Mechanical Means with all lead

Item Code [road 2025 5.2 ii]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503.

Please Enable Macros to View BoQ information