PROVN OF TOILET BLOCK WITH URINAL AND WATER TANK AT JADC AND CERTAIN REVENUE WORKS AT NEW MIL STN UNDER GE GANGTOK

Amount

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.

M&L for precast PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) block masonry with solid blocks, exc 10 cm in width and setting in CM (1:6) complete all as specified and directed.

M&L for 15 mm thick rendering plaster on fair faces of conc faces/ brick wall faces of smooth without extra cement in CM (1:6) complete all as specified and as directed .

M&L for 15mm thick rendering in cement plaster in CM (1: 4) on other than fair faces of stone masonry wall incl finish the surface even and fair without using extra cement complete all as directed and as specified

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed.

M&L for applying three coats of white wash on new plastered wall surface including preparation of new and previously untreated surfaces of wall complete all as specified and directed .

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified etc complete all as directed by the Engr-in-Charge.

S&F galvanised steel water tubing 25 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.

S&F chromium plated single lever wash basin mixer complete all as directed by the Engr-in-Charge.

M&L fo Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, , in floors over and including 15mm thick screed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm/450x300x7mm mm thick fixed on vertical surfaces such as dado / skirting, raiser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed / backing layer of 10 mm thick in cement mortar (1:3) complete all as specified & as dirceted.

M&L for granite (of any type) work 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM (1:6) complete all as specified and as directed

M&L for PCC (1:2:4) type -B-0 (using 12.5 mm graded crushed stone aggregate) as in coping, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed

M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and directed.

S&F for 15 mm chromium plated angle cock with wall flange complete all as directed by the Engr-in-Charge

S&F Chromium plated Toilet roll holder with flap guard complete all as directed by the Engr-in-Charge

S&F Health faucet with 1 mtr flexible tube and wall hook complete all as directed by the Engr-in-Charge

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and directed.

S&F factory made flush shutters 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 150 mm size aluminium anodised cast type handles complete all as specified and as directed.

S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed.

S&F of 75mm size mild steel butt hinges medium weight complete all as specified and as directed.

S&F Stainless steel towel ring round complete all as specified and as directed.

S&F soap dish cromium plated body and Polycarbonate brackets including wall flange and screws etc complete all as specified and as directed.

S&F wash hand basin, vitreous china, white, table top shape (550x400mm) including 32 mm dia waste coupling, waste pipe all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) in plinth protection path/hardstanding finished cement concrete surfaces fair and even including forming construction joint filled with CM (1:6) complete all as specified and as directed.

S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated/Zigzag/Trapezoidal corrugation steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws/L type or J hooks complete all as specified and as directed.

M&L for Formwork (flat rough finished surfaces of concrete) to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L mild steel bars 10 mm dia & over cut to length bent to shape required, including cracking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed.

M&L for MS bars 5 mm dia and over upto and including 10 mm dia in stirrups cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia quality conforming to TMT bars complete all as specified and as directed.

M&L for RCC type B1 (1:2:4) (using 20mm graded crushed stone aggregate) (Nominal mix)as in Slabs supported on walls, beams and columns in floors, roofs, landings, cover slab, balconies, canopies, deck slabs and in shelves, linlet beam and the like complete all as specified & as directed. NOTE : Re-inforcement shall be measured and paid separately.

S&F aluminum window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, galzing clips, 4mm thick glass/AC board/particle board rubber neoprene packing incl aluminum grill and anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamal paint 1st grade quality over one coat of red oxide primer complete all as specified and directed.

S&F rotational moulded polythylene water storage tank, 2000 litres capacity, anti bacterial, UV and heat resistant 3 layer (ISI marked) multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.

S&F ball valve brass 20 mm dia high pressure with polythene float and fly nut complete secrewed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore GI pipe all complete as specified and as directed.

S&F galvanised steel water tubing 25 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.

S&F of 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F continuous ( piano) hinges with 30 mm width of flaps ( when open), mild steel bright finish or electrogalvanised fixed with stainless steel screws complete all as specified and directed.

S&F of 75mm size brass handles (decorative type) cast type polished bright complete all as specified and directed.

M&L for two coats of synthetic enamel paint (1st grade quality) to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and directed.

S&F vitreous China urinals, full stall ( Carmina flat back or corner wall type) 420x395x635mm including vitreous China urinals partition (Corvin 90x320x720mm), CP waste coupling CP urinal spreader and waste pipe complete fix to wall surface etc all as specified and directed by Engr-in-charge.

S&F vitreous China single piece water closet with PP soft close slim seat cover, hinges, double flusing cistern fittings, fixing accessories and accessories set etc Size 360x660x755mm 'S' Trap all as specified and directed by Engr-in-charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F 75 mm dia PVC floor trap of outlet, with gratings, including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl fixed in position complete all as specified and directed.

S&F for PVC(SWR) 110mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolt, bends, Tee all as specified and directed.

S&F 75mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed on walls with necessary clamps etc complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n.exc 15cm thick (un reinforced) (below or above ground level) complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10 mm thick (Square / Rectangular) polished, area of each tiles not exceeding 0.36 sqm , as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed/bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No 54.00 here-in-above but as skirting/vertical surface etc on 10mm thick rendering/back coat in CM (1:4) complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

M&L for 2nd class plain, framed, panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

S&F of 100mm size mild steel butt hinges long complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

M&L for machine cut prepolished kota stone flooring slab flooring 20-25mm thick over cement screed 10mm thick screed bed in CM (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling old stone complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-0, (12.5mm graded crushed stone aggregate) 25mm thick as in sub base floor complete all as specified and directed

Material and labour for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for rendering 20mm thick in cement mortar (1:4) in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces on other than fair faces etc complete (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.

Supply only liquid waterproofing compound complete all as specified and as directed.

M&L preparation of new plastered surfaces of wall applying two coats of distemper, oil emulsion, white or tinted over new wall surface on a coat of 3mm thick wall care putty in two layers (1.5mm each layer) complete all as specified and as directed.

S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, all necessary fittings required complete all as specified and as directed.

S&F Double action action floor door closer hydrauically ragulated made up of minimum 1.25mm thick aluminimum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duly and fixed complete all as specified and as directed.

S&F Solid PVC single side prelam wall Lining consisting of 5mm thick PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

M/S S. S CHETTRI AND SONS (BID ID -3359086)

SANJAY KAUSHIK (BID ID -3364228)

BIJAY MITTAL (BID ID -3352547)

DHARMINDER SINGH (BID ID -3354594)

S K ENTERPRISES (BID ID -3357011)

M/S ANIL KUMAR THAKUR (BID ID -3355879)

KARMA TSETEN BHUTIA (BID ID -3359707)

RAAJ BANGAR (BID ID -3368972)

RABI BANIK (BID ID -3355407)

Phurba Wangdi Sherpa (BID ID -3368035)