Special repair of PHC Mankawas in Charkhi Dadri Distt. (Reinvite)

Amount

Dismantling brick work, Tile masonary or tile linning & tile terracing in cement (HSR 8.5,b)

Dismantling cement conglemerate/terrazzo floors 25mm to 50 mm thick including concrete base.(HSR 8.25)

Dismantling white or coloured glazed tiles (to be carefully removed)(HSR - 8.38)

Scraping of (a)white wash & colour wash (HSR- 8.32a)

Boundary wall

Scraping cement plaster (HSR 8.32,b)

Removal of old broken glass panes (any thickness or size quality or description from wooden frames glazed with putty or fixed with beads(HSR8.33,a)

Tile teracing with one layer of tiles 22.86 cmx1.43cm x3.81cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1:3 and top surface to be left clean(HSR 13.14)

Cement concrete 1:2:4 gola 10cm x 10 cm quadrant Along junction of roof with parapet wall finished Smooth ,where specially pecified.`(HSR 13.64)

Providing and fixing PVC Rain Water pipe 6kg. Pressure of ISI mark in cement mortar during masonry work.(HSR 13.89,a,b) 100MM dia PVC pipe 6kg. Presure

150MM dia PVC pipe 6kg. Presure

Providing & fixing PVC Bend ISI Mark (HSR 13.90,a,b) 100MM dia PVC Bend

Providing and fixing ceramic tiles/ anti skid tiles of size 400mmx400mm or abve size of approved make in flooring lid in any pattern as specified over base of 20mm thck cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles (HSR 14.91)

Preparation of plastered surfaces for oil bound distemperinluding sand papering the surface applying one coat of linseed oil and filling with approved quality filler consisting of white lead linseed oil varnish and chalk miti including finishing the surface to the required finish complete (HSR 16.52)

Distempring with wahable oil bound distemper (of approved manufacture) two coats on old distempered wotk (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint.(HSR 16.79,b)

Supply and fixing flass panes with moulding commercial hard wood such as hollock champ chikrassy and chaplash etc (Non coniferou timber other than teak conforming to I.S. specification No. 1003 kiln seasoned) (a) 2mm thick (glazing area upto 9 sqdm or each pane)(HSR 17.36,c)4mm thick

Providing and fixing hard drawn steel wire fabric 75mm x25mm rectangular mesh with 3.25mm dia wire fixed on steel winsows of standard miled section with 3mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect (HSR 18.33)

Providing and fixing in position best Indian make lavatory suites (with full anti splash rim in vitreous chinawar and all other necessary fittigs as fuly descibed in item No. 30.41 above(HSR 30.42,ii) Size 530mm x430mm with one no tlap

Providing and fixing DND fibre shed (NS)

Providing and laying and jointing GI pipe (NS) 15mm dia

Cost of pipe

20mm dia pipe

Cost ofpipe

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge), INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor, with raised foot treads COMPLETE WITH 100 MM H.C.I. ‘P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above. (HSR 30.2 b i)

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (b) Double trap syphonic (ii) Single Color. [HSR 30.5 (b) (ii)].

EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY VITREIOUS CHINA HIGH LEVEL CISTERN COMPLETE with internal brass fittings instead of 12.5 litres capacity high level C.I. cistern complete (as approved by the Engineer-in-charge) (i) White (HSR 30.8)

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid.(i) White plastic seat (Solid). [HSR 30.13 (i)].

PPROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF THREE STALL URINALS 1150 MM HIGH IN VITREIOUS CHINAWARE WITH ONE NO. 10 LITRES CAPACITY C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE COMPLETE as fully described in item no. 30.29 above. (HSR 30.31 i)

Providing and fixing 25 mm thick marble partition for different type of urinals. Small size 680mm x 330 mm Single Color(HSR 30.40 b ii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE LAVATORY SUITES (WITH FULL ANTI SPLASH RIM IN VITREIOUS CHINAWARE and all other necessary fittings as fully described in item no.30.41 above. White Size 510 mm X 400 mm with one no tap(HSR 30.42 i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TAP FOR LAVATORY SUITE. (HSR 30.45)

Providing and fixing in position best quality Stainless Steel Sinks with Complete fittings as fully described in item No. 30.51. (a) 600 mm x 450 mm x 200 mm. [HSR 30.53 (a)].

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (d) CP Brass two swivel towel rail 400 mm long (HSR 30.68 d)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHROMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.71 a i)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75]. (a) Bib cock long body.

(c) Bib cock

Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15 mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a) (i) Stop cock male and female end

(ii) Concealed stop cock with flange

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) two way (HSR 30.78 b)

Providing and fixing in position best Indian make flexible tube connection. (a) aluminium (iii) 15mm x 450 mm. [HSR 30.82 (a) (iii)].

Providing and fixing in position H.C.I. Soil waste vent or antisyphonage pipes to I.S.I. specifications of E.L.C. manufacture or of any other reputed firm including cutting and wastage etc. and cutting holes in walls, roofs or floor etc. and making good to its original condition but excluding cost of lead jointing. (HSR 30.84) (a) 100 mm internal diameter.CC gola

Cutting chase in brick wall in cement or in floor for embedding G.I. or H.C.I. pipe lines and making good the same to its original condition. [HSR 30.95 (a)]. (a) Size 75 mm x 75 mm.