REPAIRS/REPALCEMENT OF DRAIN PATH, CULVERT AND HARD STANDING OF AREA I OF AGE B/R(W) AREA AT COLABA, MUMBAI

Amount

M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), size of disturbed portion not execeeding 150mm X150mm X 200mm all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified and directed.

M&L rubber moulded glossy finish 60 mm thick precast grass concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand including providing grass on surface all as specified and directed.

M&L for glazed / matt finished chequred grass finish cement concrete coloured tiles of area exc 0.09 Sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) over and including 20 mm thick screed bed in CM (1:6) for fixing tiles all as specified and directed. Make -Somany/Rak/Kajaria or equivalent

M&L rubber moulded glossy finish 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of M-35 Grade with grey cement and pigment laid over sand cushning 25 mm thick using surface vibrator compacted bed of coarse sand, filling the joints with fine sand all as specified and directed.

M&L glazed / matt finish chequred cement concrete coloured tiles of area exc 0.09 Sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) over and including 20 mm thick in CM (1:6) for fixing tiles all as specified and directed. Make -Somany/Rak/Kajaria or equivalent

M&L for any coloured vitrified heavy duty outdoor anti, skid full, bull -noise finish, self embossed grooves body tiles 10 mm thick (Square/rectangular, 600mm x 600mm) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over 20 mm thick in screed bed in CM (1:4) for fixing tiles any where required all as specified and directed. Make -Somany/Rak/Kajaria(Grandstone Crema series) or equivalent

M&L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15-18 mm thick (Square / Rectangular, 600mm x 600 mm) polished, area of each tile exc 0.09 Sqm and but exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles laid over 20 mm thick screed bed in CM (1:4) for fixing tiles any where all as specified and directed. Make -Somany/Rak/Kajaria(Geostone series) or equivalent

M&L 20mm thick Granite (of any type) machine cut laid over floor cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and direceted.

M&L 20mm thick Granite (of any type) machine cut, in wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and directed.

S&F in repairs of fancy design 4 LED outdoor wall lamp 12 watt up and down light having minimum weight of 0.60 Kg, rectugular shape with conncealed wiring with wire having adequate number of connectors and one power supply kit as per manufacture requirement and all as specified and as directed by Engr-in-Charge. Note- Item includes connection to main electric supply from near by electric sources.

S& F in repairs pile height 35 mm thick, density 18900/stitch /m2 colour fruit green with backing double PP net with PU coating fixing mapai ultrabond turf PU 2K artificial grass glue adhesive fixing all as specified & directed .

S&F in repairs sign board made of retro reflective Type IV high intensity prismatic grade sheeting in any colour and size with signs as per IRC 67-2012 including MS Pipe of suitable dia and height and 4mm aluminium compsoite material grade including required clamps, embedded in below ground level including excavation and PCC M15 (Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 300mm X 300mm X 450 mm and making good surface all as specified and directed. Note : Earth work and PCC in foundations shall be inclusive of rates quoted by contractor.

S&F in repairs fancy design SS garde 304 street LED bollard having minimum weight of 11.30 Kg, diameter of 100mm length of 1.00m at top and bottom diameter of 180mm using 100 mm polycarbonate glass milky white with 12 watts LED module light of philips/fulham driver having adequates number of connectors and one power supply kit as per manufacture requirement and provide bothside hook for fixing chain link necessary provision for fixing on road all as specified and as directed by Engr-in-Charge. Note- Item includes connection to main electric supply from near by electric sources.

M&L in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemet for Stainless Steel grade 304 decorative designer railings, staircase, covers, sitting place, shed etc. (design and pattern as approved) made out o complete all as directed by Engineer-in-Charge Make : Jindal stainless Ltd., SAIL, TISCO, POSCO etc.

Dismantiling and refixing after preparation of sub base, 25mm thick coloured chequred cement concrete tiles with grey cement and coloured pigment of size 300mm x 300mm/200x200mm set, jointed and pointed with neat cement slurry with as in floor including 20mm thick cement mortar screed bed in CM 1:4 all as specified and directed.

Dismantiling and refixing after preparation of sub base, 60mm/80 mm thick coloured interlocking tiles with grey cement and coloured pigment set, jointed and pointed with neat cement slurry with as in floor including 20mm thick screed bed in CM 1:4 all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removed from site of work all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for including removing debris from MoD land all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided including removing debris outside MoD land all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, hardstanding and all other similar works, finishing the cement concrete surfaces even and smooth without using extra cement all as specified and directed.

M&L for forming construction joints 30mm deep X 10mm wide with sealing compound grade A all as specified and directed.

M&L for READY MIXED CEMENT CONCRETE DELIVERED ON BUNKER M-20 type-1, 1:11/2:3 (using 20 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

M&L 75 mm thick PCC type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L for providing precast cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:4 in road side kerb stones of size 450 x 300 x 150 mm or similiar with longer facing edges tapered on top and all other similar works all as specified and directed.

M&L for preperation of old / new Pre-cast concrete kerb stone surfaces or similiar concrete surfaces and applying two coats of industrial epoxy paint over a coat of primer of any colours and pattern all as specified and directed .

M&L two coats of epoxy concrete floor coating on surface (consists of hardner and resin) over one coat of primer for creating a bonding between epoxy and concrete surface. Before applying, prepare the surface from any undulation (using wire brush or electric floor scrubber, Etching) removing all oil and grease stain if any, and brooming the surface clean to remove any settle dust particle, filling the cracks with suitable epoxy grout material and then applying the coating with the help of a roller all as specified and directed by Engineer in–Charge.

Demolition of brick work including all quoins, arches, pillars but excluding ashlar facings built in cement mortar all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & as directed.

All as per above item No 30 above but except bricks. (Serviceable bricks obtained from Item No 29 above to be reused.)

M&L in repairs precast cement concrete block masonry with solid blocks with 390x300x200 mm size, exc 10 cm width and setting in cement mortar 1:4 type C1 (1:3:6) including dismantling all as specified & directed

M&L 20mm thick cement plaster on fair faces of brick or concrete surfaces in two layers of 15 mm+5 mm in cement mortar 1:4, each coat shall be mixed with water proofing powder @ 2% of cement or as per manufacturers instuction including necessary scafolding all as specified and directed. Note:- Water proofing compound shall be measured separately under respective item.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work, finished surfaces even and smooth (without using extra cement) including taking down all as specified and directed.

M&L 20mm thick cement plaster on fair face of brick or concrete surfaces in two layers of 15 mm+5 mm in cement mortar 1:4, each coat shall be mixed with water proofing powder @ 2% of cement or as per manufacturers instuction including taking down necessary scafolding all as specified and directed. Note:- Water proofing compound shall be measured separately under respective item.

Supply only intergral water proofing compound powder confirming to IS- 2045all as specified and directed.

M&L in repairs providing precast cement concrete (1:2:4) type BO (using 12.5 mm graded crushed stone aggregate) jallies 40 mm thickness (measured solid) including all mouldings and frame set in cement mortar (1:4) all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete and like all as specified and direcetd.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping , bed concrete and all other similar works including necessary formwork all as specified and as directed.

M&L RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded crushed stone aggregate) as in precast factory made cover slab perforated/Plain fixed in position, tie between two brick walls and all other similar works set in CM 1:4 including necessary form work all as specified and directed.

M&L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to all as specified and directed.

S&F in repairs cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and shoot doors, balusters and similar articals exc 5 kg each by weight all as specified and directed by EIC

S&F MS plate (chequered) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150 mm handle all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F in repairs framed work such as grills, gratings with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of epoxy paint over one coat of epoxy primer all as specified and directed. Make : Asian paints PPG / Berger protective coating or equivalent

Taking down rain water pipes/PVC pipes/cemented pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. at any height, any location, any floor including all necessary scaffolding all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding all as specified and directed.

S&F 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height including necessary scaffolding all as specified and directed.

S&F 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick all as specified & as directed.

M&L for RCC Type B1, 1:2:4 (using 20mm gradedcrushed stone aggregate) as in Slabs supported on walls, and all other similar works all as specified and directed.

S&F in repairs 200 mm dia reinforced concrete pipes, class NP-2 laid and jointed with collar all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends all as specified and directed.

M&L for preparing New surfaces of walls/ceilings by and applying two coats of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) over a coat of primer (Ultima Protek Duralife Basecoat) or equivalent) and scaffolding where ever required at any height for external painting all as specifed and directed.

M&L for preparing old surfaces of walls/ceilings by scrapping/rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) including necessary scafolding of any height for external painting all as specifed and directed.

Removing and refixing of MS / Steel drain cover with steel frame after peparation of base/edegs of menhole / drain all as specified and directed.

S&F RCC M-30 Grade approved Precast concrete post of size 150mm x 150mm x 2100 mm height , having two grooves of size 55 x 28 mm so as to receive 7 Nos of panels having size of 1500 mm x 300 mm x 50 mm thickness 1 Jafari type panel at top as approved by Engr-in Charge/GE). The post shall be reinforced with 4 Nos of 8 mm dia bars with 4 mm dia stirrups @ 150 mm C/C, panels shall be reinforced with 4 Nos of longitudinal bars of 6mm dia plain steel & 6mm plain MS Stirrups @ 150 C/C all welded. The post shall be fixed to the ground by digging a hole of 300mm x 300mm x 600 mm and filled with PCC 1:3:6 after the post should be aligned in these holes, including removal of excavated earthwork outside MoD land. The post will be erected @1.615m C/C. Height of the pillar shall be 2700mm (600mm below the ground and 2100 mm above the GL) with any approved design by Engr-In-Charge all as specified & directed .

jkconstruction

ASHOK CONSTRUCTION

Frends Enterprises

Bright Construction Co

N F ENTERPRISES

RUPESH CONSTRUCTION CO

Unitech Enterprises

AMBICA ENGINEERING

HINDUSTAN BUILDERS

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

Frends Enterprises

SRI SAIRAM COUNSTRUCTION

ASHOK CONSTRUCTION

Bright Construction Co

jkconstruction

RUPESH CONSTRUCTION CO

N F ENTERPRISES

AMBICA ENGINEERING