RAISING HEIGHT OF BOUNDARY WALL UPTO 8.2 FEET WITH GALVANIZE SHEETS FOR BLOCKING PUBLIC VIEW AND MAINTAINING SECRECY OF OBSTACLES AT 24 SSB X GTO GROUND AT SCS AND OTHER SACTIONED / LBW / MINOR WORKS UNDER GE(SOUTH) BANGALORE

Amount

Excavation in post holes (for similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubbed mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in posts,pillars etc all as directed.

S&F for MS work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1998 grade St.-240 complete all as specified and directed.

S&F for roof trusses (framed) purlins , framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc., complete usingFe 410-W (Gde -E-25 Quality A) complete all as specified and directed.

S & F mild steel plates (plain or corrugated) channes, square cut or notched (ordinary and counter sunk) foming holes, without any attachments conforming to Fe410-W (gde E-250) quality-A complete all as specified and directed.

M&L preparing new steel surfaces of any description and apply one coat of red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and directed..

S & F 0.50 mm thick pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet of an having.colour on exterior side tensile strength of 550MPA as in roof covering/cladding to walls fxied with self tapping screws as specied and conforming to all as specified and directed.

M &L providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in Coping, rounded or chamfered complete all as specified and directed .

Providing precast cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in parapet walls etc, complete all as specified and directed.

Rendering 15 mm on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) etc, in CM 1:4 complete all as specified and directed.

Supply install ,testing and commissionig of factory assembled silent diesel engine driven generating set fully wired alternator AC to given an output of 100 KVA continuously rating at PF of 0.8 lagging, 415 volts AC 3 phase 4 wire 50HZ+/- 1% supply, 1500 RPM, diesel engine will comply with CPCB norms latest as ameneded time to time including on site testing under full load condition in presence of rep as detailed .Engine should be able to take electrical load of 100KVA and also able to take 10% extra load for 1 Hour without any failure. The diesel Engine will comprise following and including all standard accessories and protection as reqd for proper functioning in typical conditions :-

(a) Dry type air Cleaner (b) Exaust silencer suitable for canopy (c)Expansion bellow (d) Lube Oil (e) Lube Oil filter (f) Fuel Filters (g) Raditors with pusher type fan and mounting (h) In-line mono block fuel injection pump (i) Mechnical engine

(i)Flywheel with starer ring and bvell housing suitable for close coupling (j) 12 Volt charging alternator (k) 12 Volts Battery (l) Micorprocessor based controller mounted on the controller panel (m) Protection system for low lube oil pressure and high water temprature Make: GREAVES / KOEL / CAT TRANSPORTATION: INCLUDING TILL SITE WARRANTY: 5 YEARS FREE REMOTE MONITORING FOR 5 YEARS

Alternator: alternator suitable for 100 kVA for continious operation rated at 1500 RPM 415 Volt, 0.8 PF, 50 Hz 3 Phase in SPDP enclosure self exicited and self regulated, Brush less, floor mounted with Ball bearings on ends shields. The alternator will be suitable for tropical condition Make: Mecc Alte / Leory Somer /KG/Kirloskar Note :- Cost of load testing fuel and other accessories required for testing at site deemed to be included in quoted rates.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for laying CI pipes / LT UG cables / GI Pipes / Street light pole and getting out in soft/loose soil.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point all as directed.

M&L for PCC Hardcore of guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

M&L for PCC type C- 2, 1:3:6 (40mm graded aggregate) foundation for DG set

M&L for PCC type B- 2, 1:2:4 (40mm graded aggregate) foundation for DG set

Supply and install off load front Handle opertaed Change over switch with enclosure rate voltage 415 Volt Ac 50 Hz four pole of capacity 100Amp Make- INDOASIAN cat No OFFP0100

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium sonductor of size 50 Sqmm 3.5 core including taking down unserviceable UG cable complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete.

Returing & filling in trench spreading ,leveling watering and well ramming in layers not exceeding 25 cm deep as in soil complete all as specified and directed.

Supply, laying dry river sand in trenches for cable cushioning all as specified in clause 19.75 of SSR part-I. Note :- Punned thickness of sand only will be measured & paid.

Supply, laying, testing and commissioning of LT under ground cable XLPE insulated armoured, heavy duty, elelctric cable, size 10 Sqmm 2 Core with stranded aluminium conductor, 1100 Volts grade conforming to IS -7098 (Part-I) 1988 laid in trenches /walls/floors /ducts etc fixed with saddle and clamps or passing through pipes complete with cable ends connection with proper thimbles nut bolts washer all as directed .

Supply and lay burnt bricks cable cover, class LV, type 1, flat, size 230mm x 115mm x 70mm in replacement of burnt bricks used as cable protection covers complete all as specified and directed.

Supply & Laying GI tubing light grade of size 40 mm with necessary fittings as in cable protection laid in trenches/road/fixed on wall / floor including necessary clamps bolts and nuts complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

M&L required for erection of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long)

Material & labour for PCC 1:4:8 type D2 ( using 20mm graded stone aggregate ) as in foundation, mass concrete for pole foundation/road crossing etc. complete all as specified and directed.

S&F MCB SP 5 to 32 Amps, 240 Volts,'C' curve complete all as specified and as directed.

Supply and fixing GI pipe bracket made of 40 mm bore light grade pipe made to shape of overall length of 1.2 mtr for fixing of security light fitting including MS clamps , nuts & bolts of required size complete all as specified and as directed.

S&F PVC conduit pipe from PVC junction boxes to street light bracket for protection of cable, fixing of clamp on PCC poles complete all as specified.

S&F PVC 3 core copper cable 1.5 sqmm insulated for fixing of junction boxes to street light fittings complete all as specified and directed.

Supply & Fix of thermoplastic IP 66/67, weather proof, corossion free,halogen and silicon free, UV resistance , insulated and shock proof , high impact strength, flame retardent and self extinguishing junction boxes suitable for terminating cable of 16 sqmm including necessary cable gland and check nut of suitable size including mounting brackets for fixing on steel tubular pole complete all as directed. Make Sintex

M & L point wiring with 1.5Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC casing capping incl modular type steel sheet pressed terminal box (recessed) with modular frame and to cover incl 1.5Sqmm PVC insulated copper conductor earth continuity wire for one light / fan / bell point controlled by one switch.

(a) One 3 pin 5 Amps socket outlet point on independent board

M & L switch socket outlet 2 in 1, 3pin 5Amps all as specified and as directed.

M & L switch piano type, 5Amps single pole one way all as specified and as directed.

Supply only bottled water dispenser, having option of dispensing hot and cold water with cooling capacity 2 litres / hr and tank capacity 1.5 litres, heating capacity 5 litres / Hr and tank capacity 0.8 litres, working in R-134a refrigerant complete all as specified and as directed.

MAJ CONSTRUCTIONS

Aavani BUILDERS AND CONTRACTORS