CERTAIN SPECIAL REPAIR, REVENUE AND MINOR WORK UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises

Non skid cermic coloured tiles 7 to 8mm thick joint free (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in CM 1:6

All as per item No 02 above but as in skirting/ vertical surface over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4

M & L coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete.

M&L coloured ceramic tiles 300 x200 x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick backing coat in CM 1:4.

Glazed cermic coloured tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick set and jointed in neat cement slurry and pigment in white or coloured cement to match the shade of tiles over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4

Taking down chowkhats or frames n. exc 1.5 Sqm each with shutters ( without taking off shutters from the frame)

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing.

S/F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F butt hinges of size 100mm medium weight cold rolled mild steel and fixed

S&F Mild steel barrel tower bolts,stove enamelled black, with bright bolts 150mm and fixed.

S&F mild steel pressed handles, oval type, stove enamelled black 150mm

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete

S & F PVC valveless, syphonic action type flushing cistern 10 liters capacity, low level, white with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern,

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm.

Demolition of old existing unserviceable WHB glazed and S&F vitreous china wash hand basin white of size 550 x 400mm flat back excluding taps, waste china and plug but including brackets including cutting for and pinning in ends of brackets or erecting stand complete in repair

S&F in repair stainless steel grating doom 100 mm dia all as directed

S&F in repair angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore

S&F Brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges

S&F in repairs PVC cabinet with towel rail of size 475 x 600 x 150 mm complete all as specified and directed by Engr-in-Charge.

Soap dish brass CP fixed in repair

M&L chromium plated overhead rain shower with revolving joint and 115mm long shower arm with wall flange 15mm bore fancy type any colour and fixed in repair complete all as specified and directed by Engr-in-Charge

S&F bathroom Glass corner of best quality complete all as specified and directed by Engr-in-Charge.

M&L CP cast copper alloy bib taps two way with flange and areator fancy type of 15mm bore quarter turn fixed in repair

S&F 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down for iron pipeand fixed complete.

M&L CP fancy type centre hole basin mixer 15mm bore cast copper alloy with 450mm copper hose/ braided hose without popup waste system quarter turn

M&L of 15mm brass CP mixer hot & cold water screwed down for iron pipe and fixed

Dismantling and taking up or down the existing unserviceable 15 mm dia GI pipe and S&F new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and celing or laid in floors

M&L 19mm thick MDF membrane kitchen cabinets door, shelf, partiton and shutter etc in wood grain colour, half round edge fixed

S&F Auto close hinges, stainless steel, bright finish or electrogalvanised.

S&F brass handle of 100mm size type polished bright

M&L of kitchen basket stainless steel size 435mm x 510mm including stainless stee; guide channel

M&L granite 16 to 18mm thick ( of any type) work ( table rubbed and polished in steps, jambs, pillars, windows cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

S&F sink with drainage board made of stainless steel 1.0mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with 7 including fixing cantilever brackets and connecting union to pipe, overall size 1120mm x 457mm bowl size 460 x 330 x 203mm includng waste pipe of polythelene of flow or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete including taking down of existing old sink.

S & F sink with drainage bd made of stailess steel 1mm thick kitchen or laborator with plugs washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410x330x160mm

S&F light shade vetrified ceramic tiles edge cut 10mm thick ( square/ rectangular ) polished, area of each tiles not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 15mm thick screed bed in CM (1:4) finished fair and even

All as per item No 38 above but as in skirting/ vertical surface over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4

Taking down Flush/pannelled door of area exc 1.5 Sqm but n exc 4 Sqm each (without taking out frame) and refixing in same position after carryout necessary repair work complete as directed.

S&F vitreous china wash hand basin colour,oval type including cutting of garnite and fixing brackets, waste coupling, PVC waste pipe complete all as specified and directed.(Make : Parryware /Hindware /Cera )

S&F Vitreous China wash basin, white , flat back, size 550mmx 400mm but including brackets , coupling and waste pipe complete

Taking down cement plaster on brick/stone wall, ceiling etc incl raking outs joints hacking for key scrubbing with water.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick work including finished even and smooth without using extra cement

Rendering 15 mm thick cement plaster in CM 1:4 on fair faces on brick masonry (External surface) including finished even and smooth without using extra cement.

Supply only water proofing compound

M&L preparation of newly plastered surface wall and applying two coats of cement base paint of any tint over a coat of primer complete all as specified and directed.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement

Rendering 10 mm thick cement plaster in CM 1:6 on other faces of brick work (Internal Surface) including finished even and smooth without using extra cemnet

M & L rendering 10 mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement

M & L for machine cut granite stone slab 20mm thick of approved colour and shade as in floors, skirting/dado etc over and including 15mm thick backing coat in CM 1:4 laid and jointed in grey cement slurry and pointed with white/colour cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified

M&L for machine cut makrana white marble slab 15 to 18mm thick in backing coat in CM 1:4 laid and jointedin grey cemnt slurry and pointed with white cement with admixture of pigment to match the shade of the slab including all necessary cutting and waste and machine polishing (Mirror finish) in steps complete all as specified

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out hard/dense soil

Excavating in trenches , n exc 1.5 m wide and n exc 1.5 m depth for foundation etc. Or for shafts , wells manholes, pier holes etc. N exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil

M&L Returning, filling in,including spreading, levelling , watering and well ramming in layers not exc 25 cm

Removing excavated material n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point.

Earth filling under floors including spreading , levelling watering and well ramming in layers not exc 25 cm thick.

M&L hardcore of broken stone or boulders , gauge not 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface all as directed.

M&L cement concrete in foundations, filling and mass concrete 1:4:8 type D-2 using 40 mm graded stone aggregates

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:6

M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs , under reamed piles and mass concrete complete all as directed.

M&L RCC M-25(Design Mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span complete all as directed.

M&L RCC M-25 (Design Mix) slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M&L for rough finish formwork to sides of concrete foundations, footings , bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work: vertical or to better for rough finished flat surfaces of concrete.

M&L for rough finished formwork to sides and soffits of floor or rooof beams, beam haunching, girder s , lintels, cantilevers, shelves including supports, overhangs etc.for rough finished flat surfaces of concrete.

M&L for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work : not exceeding 200m thick (horizontal or sloping) for fair finished flat surfaces of concrete.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per item no 67 above but 6mm to 8mm dia

All as per item no 67 above but 6mm to 8mm dia as in stirrups

M&L screed bed or bedding layer or mortar 15 mm thick over roof finishes in CM 1:6 finished even and smooth w/o using extra cement.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete

S&F sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane with 3 mm thickness

S&F 200 mm long Aluminium anodised barrel tower bolt of extruded section

S&F aluminium handles cast type anodised 150 mm size complete all as specified

Taking up or down steel tubing and connection including cleaning 15 mm bore

Taking up or down steel tubing and connection including cleaning 20 mm bore

Taking up or down steel tubing and connection including cleaning 25 mm bore

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted toceiling or laid under floor.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&Fvitreous China urinals, bowl type(back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement

S&F Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm

S&F vitreous china wash down water closet pan (pedestal pattern) white (excludinfg flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc.

S&F in repair vitreous china Squatting pan 'Orissa' pattern water closet white size 580mm x 440 mm with integral foot rest (excludinfg flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc.

S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed

S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore or union and fixed

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms)

S&F in repair 100 mm bore Cast iron soil, waste and vent pipe in any length with or without ears, with cement Joints, laid in trenches or but fixed in walls

S&F Bends for 100 mm bore pipe with ducks foot or heel rest for cast iron pipe fitting

S&F cast iron cowls for 100 bore pipe

S&F stack clamps out of 50 mm by 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall for 100 mm bore pipe.

S&F cast iron Nahani traps with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) for 100 mm bore pipe

S&F 100 mm cast iron sanitary connection socket to fit WC outlet

Disconnecting existing tank of capacity Exc 250 and not exc 500 litre,setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in position .

S&F Rotatinal moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity 1000 ltr

S&F Rotatinal moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity 500 ltr

Demolition of PCC in ground floors and pavings n exc 15 cm thickness( below ground level)

Demolition of brick work or stone boulder masonry built in cement mortar

M&L cement concrete (1:2:4) type B-2 40 mm graded stone aggregates as in surface channels and drains

M&L plain cement concrete (1:2:4) type B-1 20 mm graded stone aggregates as in coping, apex stone, bed plates parapets, cills slightly rounded or chamfered angles and throating as directed.

M&L Extra for forming fair finished drain or channel 50 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.

M&L for providing precast cement concrete type B1 1:2:4 using 20 mm graded stone aggregates in landing, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4.

S&F framed bracket of flat iron around manhole cover of any size, cut to shape welded, riveted etc complete all as specified

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples.

S&F Swivel shower of PTMT any colour for fixing with 15 mm pipe. (Minimum weight 40 gms)

Preparing new plastered surfaces and applying three coat of white wash on walls

Preparing new plastered surfaces and applying three coat of white wash on Ceiling

M&L preparing new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome.

M&L 25 mm Thick PCC 1:2:4 type B0 under floor tiles

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over and including 25 mm thick sand cushion.

M&L PCC blocks or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregates with plain or interlocking joints as directed complete in walls setting in CM 1:6.

M&L 50 mm thick plain cement concrete type C-1 1:3:6 (Using 20 mm graded stone aggergates ) as in plinth protections 100 mm thick finished even and fair with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar.

M&L scrapping roof surface with wire brushes and washing with water etc including taking down old cement plaster, PCC of any thickness, description in any situation ,position and roof treatment any type for making good to receive new roof treatment any type. and removal of same from site to out side of MOD land complete all as specified and directed.

M&L padding in PCC 12:4 type B-0 ( using 12.5mm size graded stone aggregate) laid to provide a finished slope of 1:30 finished even and smooth without using extra cement all as specified

M&L painted cement plastered surfaces with one coat of cold applied bituminous primer @ 0.40 ltr/sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/Sqm, reinforced with polyster non wove fabric (weighing not less than 150 gms/Sqm) and upper side of the membrane thermally insulated with white mineral gravel, uniformly embedded during manufacturing process shall only be used. It shall be laid by torch application. side overlaps shall be 75 mm and the end lap shall be 100 mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60 cm and then inserted inside the parapet grove. This shall be finished by a membrane flashing.

M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductore cable 1.5 Sqmm (Green) Neutral-Black) and earth continuty conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metalic PVC conduit medium grade not less than 20 mm dia ISI marked Ivory colour with all conduit fittings/fixing accessories and unwelded sunken glavainized pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for one light point controlled by one switch.

All as per item No 117 one fan point controlled by one switch

All as per item No 117 one socket outlet 6 amp controlled by one switch on the same board with other switches.

S&F switch piano flush button single pole one way 6 amp complete Make-Anchor Penta PC/Havells Reo/SSK

S&F socket outlet 2in1, 2&3 pin, 6 amp flush type complete. Make Anchor penta PC/havells Reo/SSK

S&F ceilling rose 3 plates polycarbonate body complete Make : Anchor Penta PC/Havells Reo/SSK

S&F LED batten (1:2M) made of CRCA sheet housing with a PC glossy diffuser fuly pre wired connection having a nominal system lumen output of 2000 lumenes at a minium system efficancy of 105 lumens perwtt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 buring hours at L70 and should have a color temperture of 6500k, CR>80,THD<10% and PF>0.95 complete. Make Philips Cat ref No ENDURALLED BATTEN "BN 108C LED 20S PSU CDL WH" or equivalent in CG or Bajaj as approved.

S&F LED fixutre 10 watt having lumen output 100 lumens per watt including connection. Make Philips Cat Ref No BN 021 LED 10S -6500 PSU GR S1 or equivalent in CG/Panasonic/Havells as approved.

Supply and fix eahust fan MS body AC 230 volts of 300mm sweep with standard accessores including providing 04 Nos fasteners 10mmx75mm long in existing wall and making suitable hole in wall complete Make : Havells model: ventilair DSP or equivalent in almonard/standard

S&F MCB distribution board, powder coated, CRCA steel sheet,degree of proteciton IP43- IK 09 with reversible double door, recess mounted having insulated 100 amp tinned copper bus bar, neutral busbar, eath bar, din bar, detacheable gland plate interconnection earthing connection blanking plates in unused spaces as required. SPN 240 volts, 4 ways. Make Legrand cat ref No 507610 or equivalent in Schneider cat No A9HSND04 for hanger as .

S&F MCBs of 'C' series double pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connection with copper lugs of suitable size provided in MCB DBs complete , Make Legrand Cat Ref No 408631 to 408636 or equivalent in scheider/hanger as approved

S&F MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make : Legrand cat ref No 408587 to 408595 or equivalent in Schneider/hager as approved.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth=Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x4Sqmm + 1x4.0 Sqmm earth wire in 20mm dia conduit.

Schedule of Credit

M/S M.K.Constructions

M/S Chandra Mohan Bansal

M/S ROHIT CONSTRUCTION

MSR INFRATECH

J.J.ENGINEERING

Shiv Construction Company

M/S Mohan Lal Gupta

Smita Constructions

S.R.Enterprises