REPAIR TO ROOFING, FLOORING, JOINERY AND SANITARY FITTINGS AT DGRR OFFICE, DGRR OFFICERS MESS AND RPSO COMPLEX IN THE AREA OF AGE BR III UNDER GE EAST DELHI CANTT-10

Amount

Demolition of cement concrete, unreinforced, of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Dismantling brick tiles single layer on roof, bedded, jointed and pointed in cement mortar, complete all as specified and as directed.

Demolition of mud/cement concrete in roofs including plastering and leeping, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Taking down existing water proofing treatment with APP memebrane of any thickness including scrapping out all bitumen tack coat and priming layer, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5Sqm each and removing to store, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each and removing to store, complete all as specified and as directed.

Taking down shutters exceeding 1.0 Sqm and not exceeding 2.0 Sqm each and removing from site, complete all as specified and as directed.

Taking down Kitchen Cabinet/wardrob/shelf/cupboard etc similar article in any description and any position and removing from site including all fittings and frame work, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as as in window or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, packing on the sides etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in kerb or mud stops and base of OHT over roof top, rounded or chamfered on edges, complete all as specified and as directed.

PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in PCC padding over roof, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in surface channels and drains. complete all as specified and directed.

Brickwork with sub class `B` bricks, in straight or curved on plan exceeding 6m mean radius, built in CM 1:6, complete all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and as directed.

18 to 20mm thick Granite slab (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platform and the like, bedded and jointed in cement mortar 1:4 and pointed with white cement with admixture of pigment to match with shade of Granite laid over bedding layer of 15mm thick cement mortar 1:4 including demolition of old stone slabs and tiles of any description, complete all as specified and as directed.

Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site, complete all as specified and as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification, complete all as specified and as directed.

Factory made 35 mm thick flush shutters, solid core construction with block board core and ply wood face panel, commercial type on both sides; fitted to chowkats complete all as specified and as directed.

30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube supplying and fixing in opening as per specification & drawing complete all as specified and as directed.

Factory made solid PVC moulded door shutter 30mm thick (style ) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and as directed.

Continuous piano type hinges, mild steel bright finish or electro-galvanised with width of flaps 30mm, complete all as specified and as directed.

30mm dia cupoard knobs fixed with nut, screw and washer of mild steel bright finished, complete all as specified and as directed.

Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed.

Hettich soft closure hinges of premium quality, fixed in door shutters. complete all as specified and as directed

100 mm size butt hinges medium weight cold rolled mild steel fixed complete all as specified and as directed.

50mm size cup board locks of brass including keys set, complete all as specified and as directed.

150mm size aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and as directed.

Fancy type brass bright polished handles oval type of size 75mm size, complete all as specified and as directed.

Fancy type brass bright polished handles oval type of size 150mm size, complete all as specified and as directed.

Aluminium alloy handles cast type anodised of size 150mm size, complete all as specified and as directed.

Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, fixed in repair, complete all as specified and as directed.

Floor door stopper of alluminum alloy body and tongue, anodised with hard drawn steel spring of size 150 mm, fixed in repairs, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel doors and widows with necessary 12mm iron flats with welding, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel doors and widows with necessary 12mm iron flats with welding, fixed in repairs, complete all as specified and as directed.

Fabrication & fixing of kitchen cabinet & wardrobe/ cupboard made out of 15-18 mm thick PVC board (one side laminated and other side balancing white) including providing cabinet for keeping baskets/ cutlery basket etc, complete all as specified and as directed. Make : Rajshree or equivalent (Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only).

PVC sheet white 15 mm thick fixed with approved adhesive and stainless steel machine screw (Star shaped head) in narrow widths not exceeding 10 cm width, complete all as specified and as directed.

Supply only Stainless steel basket (plain) of size 500mm x 370mm x 100mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No WA/POB/15204 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel thali basket (11-13 division) of size 500mm x 370mm x 200mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No WA/TB/15208 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Plate basket (11-13 division) of size 500mm x 370mm x160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No WA/PTH/15206 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Partition basket of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No WA/PRT/17206 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No WA/CUT/15204 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel basket (plain) of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No WA/POB/15206 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel bottle full out of size 500mm x 400mm x 160mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No FF/BPO/62018 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel grid basket (plain) of size 500mm x 520mm x 20mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Life style Cat part No WA/POB/21208 or equivalent approved by Engr-in-Charge.

Aluminium alloy powder coated (50 micron) anodized frame of section 85mm x 44mm x 2mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, partly glazed with 5mm thick tinted glass and partly with 12mm thick prelaminated particle board, fixed in repairs, complete all as specified and as directed.

Aluminum alloy powder coated (50 micron) anodized door frame with aluminum sections of size 85mm x 44mm x 2mm thick in top rail and both styles of size 100mm x 44mm x 2mm thick, lock rail and bottom rail of size 115mm x 44mm x 2mm thick, 200mm long tower bolt-2Nos, 200mm long Alm handle - 02 Nos on each leaf, 4 lever lock brass 100mm long mortice lock (Make: Godrej) & double action floor door spring ( heavy duty) suitable for 1 mtr wide shutter for each leaf , complete all as specified and as directed.

Aluminum alloy powder coated any tint standard hollow section with special powder coated coloured or any tint window frame with one glazed shutter (fixed) and two Nos. openable glazed and wire gauged shuttter sliding type with aluminum section as per series-A(15mm) 3 track of Jindal section number of sliding windows, with framed shutter including aluminium alloy powder coated snap type beads handles aluminuim powder coated barrel tower bolts & glazing clips, joints cleats rubber gaskets etc complete all as specified including provision of 5mm thick tinted glass of superior quality and stainless steel wire cloth of 0.36mm nominal dia wire and average width of aperature 1.4mm and aluminium grill including all standard fitting,, complete all as specified and as directed.

Factory made UPVC (white colour sliding window two track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of two track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of old unserviceable AC Sheet roofing, complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, including dismantling of old unserviceable AC ridges roofing, complete all as specified and as directed.

Wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out grass roots/vegetation etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped, complete all as specified and as directed.

Providing screed bed 15mm thick on top of cleaned concrete surfaces in cement mortar 1:4, applying a priming coat of bituminous primer @ 0.5Ltr/Sqm, then applying evenly a tack coat of industrial bitumen 85/25 @ 1.2Kg/Sqm, laying APP based polymeric membrane of minimum weight not less than 3Kg/Sqm reinforced with polyster non woven fabric of weight not less than 150Gms/Sqm. APP membrane will be laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen, complete all as specified and as directed.

Applying over the APP membrane after laying two coats of solar reflective bituminous aluminum paint @ 0.15Kg/Sqm.

Cement concrete tiles, factory made, Premium quality 200mm x 200mm x 20mm thick, set, jointed in neat cement slurry and pointed flush with grey cement and no pigments over 15 mm thick screed bed or bedding layer in cement mortar 1:4, laid over APP treatment, complete all as specified and as directed.

Supply only liquid water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed.

Ceiling boards including cover fillets if any, and provision of false celling 4mm thick eco board (Make: Everest) size 595x595mm fixed on GI powder coated Tee or L section (snap grid of GI frame work of size 600 x 600 mm) suspended from ceiling with GI wire 3mm thick or self screws, including one coat of OBD on one side of board complete all as per manufacturer's instructions comprising of the following including dismantling old ceiling board of any thickness and any description, complete all as specified and as directed. :- (a) Cross tee size 29x24.7x0.8mm (b) Wall angle 22.2 x 22.2 x 0.65mm.

50 mm thick plain cement concrete 1:4:8 type B-2, using 40mm graded crushed stone aggregate as in sub base finished even and fair, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made, any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with no pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made, any shape and size conforming to IS- 15658- 2006 of 80mm thick, M-40 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with no pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

Pre-polished coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 25mm thick, set, jointed in neat cement slurry and pointed flush with grey cement and no pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.

Anti Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed

Glazed ceramic tiles in vertical surface 300mm x 450mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Wall cladding tiles using tiles of size as per sample approved by GE set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed

Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bcking and rubbish off the premises, complete all as specified and as directed.

Machine cut kota stone flooring 18-20mm thick laid and jointed with grey cement slurry, mixed with pigments to match the shade of the stone including grinding and polishing (mirror finish) (Each stone not less than 55 cms x 55 cms) over a layer of 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:4 on brick/concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of interior wall primer applied over a layer of Birla White/J K White wall care putty, complete all as specified and as directed.

Applying one layer of J K White/Birla White putty on walls/ceilings, complete all as specified and as directed.

Complete removal of existing treatment from old decorated surfaces of walls by mechanised sander of Berger paints or equivalent make with Express sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of plastic emulsion paint, complete all as specified and as directed.

Preparation of old decorated surfaces of walls (plastered or unplastered) cornices, pillasters etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss efflorescence oiled/greasy spots including removal of nails, stickers etc. and filling nail holes, cracks and finishing surfaces of walls with one coat of oil bound distemper, complete all as specified and as directed.

Preparation of old/new surfaces of walls (plastered or unplastered) cornices, pillasters etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss efflorescence oil/greasy spots including removal of nails, stickers etc. and filling nail holes, cracks and finishing surfaces of walls with one coat of weather shield exterior acrylic emulsion paint, complete all as specified and as directed.

Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of old paint wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exceeding 1.5Sqm, complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

Sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

15mm bore GI tubes medium grade galvanised steel tubing with all fitting and fixed complete to wall and ceilings or laid in floor, including taking up or down old steel tubing, complete all as specified and as directed.

20mm bore GI tubes medium grade galvanised steel tubing with all fitting and fixed complete to wall and ceilings or laid in floor, including taking up or down old steel tubing, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position, including taking down old PVC water OH tank, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position, including taking down old PVC water OH tank, complete all as specified and as directed.

Looking mirror of size as approved by Engr-in-Charge mounted on 6mm thick PVC sheet and having PVC moulding all around including fixing with necessary arrangement, fixed in repairs, complete all as specified and as directed.

Vitreous china squatting pan of Orrisa pattern long pan size 580mmx440mm white with 'P' or 'S' trap front or back inlet and foot rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor, fixed in repairs, complete all as specified and as directed.

PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc., fixed in repairs, complete all specified and directed.

Plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs, complete all as specified and as directed.

Fancy type Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and as directed.

Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs, complete all as specified and as directed.

Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified and as directed.

Chromium plated towel ring round with round flange fixed with screw to wall, fixed in repairs, complete all as specified and as directed.

Tubular towel rack of brass chromium plated, 20mm dia, 60cm long between flanges, fixed in repairs, complete all as specified and as directed.

Fancy type chromium plated two way Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, fixed in repairs, complete all as specified and as directed.

15mm bore, fancy type bib tap long body of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed.

Counter type vitreous china wash hand basin white flat back size 550 x 400 mm incl 32 mm dia CP waste, 32 mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified and as directed.

Hand shower Maze Hand Shower 95X95mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) 15mm bore pipe, fixed in repairs, complete all as specified and as directed.

Over head shower rose CP Brass with shower arm for 15mm bore pipe of size 150x150mm, fixed in repairs, complete all as specified and as directed.

Angle stop cock CP with flange, fixed in repairs, complete all as specified and as directed.

CP brass Sink Mixer With Regular Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges, fixed in repairs, complete all as specified and as directed.

CP brass Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower), fixed in repairs, complete all as specified.

CP brass WHB Mixer Single Lever Extended Basin Mixer (Height-85mm) with Popup Waste System with 450mm Long Braided Hoses, fixed in repairs, complete all as specified and as directed.

Soap dish, fancy type, fixed to walls with chromium plated brass screws, fixed in repairs, complete all as specified and as directed.

CP toilet papper holder with stainless steel fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed.

Single piece WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set, Cistern fittings, Size: 366 x 655 x 765mm, S Trap-300mm vitreous china, pedestal pattern European type 32 mm dia PVC flush pipe and connection to drain, fixed in repairs, complete all as specified and as directed.

CP health faucet with connection fixed to wall with CP screws & connection to tap, fixed in repairs, complete all as specified and as directed.

PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, fixed in repairs, complete all as specified and as directed.

PVC 110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches or in floors, fixed in repairs, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, fixed in repairs, complete all as specified and as directed.

Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including necessary hold fasts and hooks, complete all as specified and as directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, complete all as specified and as directed.

Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and including Metal flush box of suitable size 3mm thick hylem sheet cover duly cut for fixing modular switches/sockets/fan regulator etc, and making good surface as original by plastering, whitewash/colour and distemper etc complete all as specified and as directed for the following :- one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

All as per description of Srl item No. 116 here-in-before but for one socket outlet 5/6 Amps on same board, complete all as specified and as directed.

All as per description of Srl item No. 116 here-in-before but for one socket outlet 5/6 Amps on independent board, complete all as specified and as directed.

All as per description of Srl item No. 116 here-in-before but wiring with 2.5Sqmm copper wire and 1.5Sqmm earth wire for socket outlet 16Amps on independent board, complete all as specified and as directed.

Modular switch flush type, 6 amps one way,SP,230 volts AC, complete all as specified and as directed.

Modular switch flush type, 16 amps one way,SP,230 volts AC, complete all as specified and as directed.

Modular switch bell push flush type, 6 amps one way,SP,230 volts AC, complete all as specified and as directed.

Modular socket outlet 6 amps 5 pin 2 module, complete all as specified and as directed.

Modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module, complete all as specified and as directed.

Modular Step fan regulator, 120 watts 2 module, complete all as specified and as directed.

Modular white cover plate with frame 1 module, fixed in repairs, complete all as specified and as directed.

Modular white cover plate with frame 2 module, fixed in repairs, complete all as specified and as directed.

Modular white cover plate with frame 3 module, fixed in repairs, complete all as specified and as directed.

Modular white cover plate with frame 4 module, fixed in repairs, complete all as specified and as directed.

Modular white cover plate with frame 6 module, fixed in repairs, complete all as specified and as directed.

Modular white cover plate with frame 12 module, fixed in repairs, complete all as specified and as directed.

NOTE : (Applicable to Srl items No. 120 to 132) Make of item : Legrand (Mylink, Arteor, Myrius) / Schneider Crispal Neo)

Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface, fixed in repairs, complete all as specified and as directed.

Bell Ding Dong AC 230 volts, single pole, fixed in repairs, complete all as specified and as directed. Make Anchor/Sargam

Ceiling rose surface bakelite, 65x50mm 2 or 3 terminals, complete all as specified and as directed.

Distribution box with modular plug & socket industrial type, 25amps, 220volts AC, SP & neutral enclosure with & including one mini MCB, SP, 25amps, fixed in repairs, complete all as specified and as directed.

Distribution box 8 way , AC, SP & neutral metal enclosure, double door, 240V AC with suitable bus bar, neutral link, earth link suitable for isolator as incomer & MCB, SP as out going, fixed in repairs, complete all as specified and as directed.

Distribution box 12 way , AC, SP & neutral metal enclosure, double door, 240V AC with suitable bus bar, neutral link, earth link suitable for isolator as incomer & MCB, SP as out going, fixed in repairs, complete all as specified and as directed.

MCB,SP,240 volts ,AC, 6 to 32 amps 10 KA, fixed in repairs, complete all as specified and as directed.

Isolator, SPN, 240 volts AC, 40 amps, fixed in repairs, complete all as specified and as directed.

Isolator, SPN, 240 volts AC, 63 amps, fixed in repairs, complete all as specified and as directed.

Modular TV socket (RJ 11 Socket Jack) 01 Module size socket as per site required, complete all as specified and as directed. Make Legrand (Mylink, Arteor, Myrius) / Schneider Crispal Neo

Taking out from existing conduit sub main wiring aluminium/copper with earth wire of size 2 runs of 6Sqmm and 01 run of 4Sqmm, complete all as specified and as directed.

Taking out from existing conduit sub main wiring aluminium/copper with earth wire of size 2 runs of 10Sqmm and 01 run of 6Sqmm, complete all as specified and as directed.

Submain wiring complete with 2 x 6.0Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4Sqmm as earth wire in and including PVC conduit of size 15mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc., complete all as specified and as directed.

Submain wiring complete with 2 x 10.0Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6Sqmm as earth wire in and including PVC conduit of size 15mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc., complete all as specified and as directed.

Rigid non metallic PVC conduit medium grade inclusive tees, bends, elbows,junction boxes, bell mouth tube ends and fixing accessories such as lock nuts, saddles, pipe hooks etc for concealed/surface(where not possible), medium grade (ISI marked) 25 mm dia, fixed in repairs, complete all as specified and as directed.

Exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as specified and as directed. depositing the old U/s item to MES store yard.

LED mirror light fitting 10/12 watt, cool/warm white as per site requirement and making all electric connections, fixed in repairs, complete all as specified and as directed. Make:-Syska/Havells/Philips/C&S/Jaguar/Halonix.

LED tube light fitting, 22 watt. wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable, fixed in repairs, complete all as specified and as directed. Make : C&S/Philips/Syska/Havells

Energy efficicent LED fittings 45W LED 6K five star rating suitable for street/builing area light pressure diecast aluminium roadway luminaire with high power LEDs and HF electronic driver complete with 40mm dia GI bracket light grade fixing on wall with nut, bolt, washar, clamps etc., fixed in repairs, complete all as specified and as directed. Make PHILIPS /Cromptton Greaves/bajaj/Havells/C&S

Security light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint,fixed in repairs, complete all as specified and as directed.

Recessed mounted LED down light fitting suitable for false ceiling, 12 watt, white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting, fixed in repairs, complete all as specified and as directed. Make Philips / Wipro / Havells

Ceiling fans complete with blades, down rods,230V 1400 mm sweep min air delivery 245 CFM with service value 6.0 BEE five star rated with brushless direct current motor (BLDC) including hanging to ceiling and electrical connections, complete all as specified and as directed.

Ventilating fan 250 mm sweep non metallic type incuding self cosing louver and making all electric connections, complete all as specified and as directed. Make: Havells/CG/GE

Note (Applicable to Srl item No. 153 to 160) Quoted rates for items are inclusinve of connecting up the luminaire from ceiling rose to connector block with 0.75Sqmm 3 core flexible copper conductor of length not less than 500mm.

PVC insulated armoured XLPE heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10Sqmm 2 core including taking out of old unserviceable cable, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr deep and getting out complete in soft/loose soil, complete all as specified and as directed.

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

Returning, filling in, including spreading, leveling watering and well raming in layers not exceeding 25cms thick complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

GI pipe medium grade 40 mm dia fixed to wall or laying under path/ road, complete all as specifed and as directed.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate, complete all as specified and as directed.

TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit and taking out old unserviceable, complete all as specified and as directed. Make : Standard/ Havells/RR Cable. Note : The PVC Conduit and conduit accessories shall be measured and paid separately.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

R. S. Associates