Reconstruction/ Strengthening of CRPF Camp-Azad Nagar-Bakshidih (Yogitand) Road (Total Length 2.71 Km.) for the year 2022-23

Amount

Clearing and Grubbing the road land,(Clearing and grubbing the road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of sercviceable materials to be used or auctioned upto a lead of 1000 mts. including removal and disposal of organic soil not exceeding 150mm in thickness.

Dismantalling of stone masonary in cement mortar -do-do- all complete as per specification and direction of E/I (i) Masonary Work

Dismantalling of stone masonary in cement mortar -do-do- all complete as per specification and direction of E/I (ii) PCC M15

Dismantalling of stone masonary in cement mortar -do-do- all complete as per specification and direction of E/I (iii) PCC M20 and above

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately (Bituminous Course by mechanical means)

Dismantling of Cement Concrete Pavement (Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately)

Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m) Including Royalty etc@ Rs. 27.48 per cum, cost of watering, rolling & compaction.

Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2) Rolling with vibratory roller

Construction of Embankment with Material obtained from borrow pit with all lifts and leads (Construction of embankment with approved materialscompacted to meet requirement of table 300-2) Rolling with vibratory roller

Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) for grading- I Material

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of the road surface and spraying primer @0.60 kg/sqm using mechanical means . As per MOSRT&H specification 502 (5th revision ) & as per direction of E/I.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @0.20 kg/sqm on the prepared bituminous surface cleaned with mechanical broom. As per MOSRT&H specification 502 (5th revision ) & as per direction of E/I.

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.) with VG-30 Grade Bulk Bitumen. for GradingII (19 mm nominal size)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects) with Bulk VG30 Bitumen. (ii) for Grading-II(10 mm nominal size)

E/W in excavation of foundation trenches in hard soil -do-do-all complete job

Providing P.C.C. M15 with nominal mix(1:2:4)in foundation -do-do-all complete

Providing R.D.R.R. stone masonary with c.m.(1:3) in foundation and plinth -do-do-all complete

Providing R.D.R.R.Stone masonary with c.m.(1:3) in superstructure -do-do- all complete as per spn. And direction of E/I

Providing R.C.C. M25 in deck slab -do-do-all complete job

Providing R.C.C. M30 in wearing coat -do-do-all complete job

Providing P.C.C. M20 in various parts

Providing HYSD bars for R.C.C.

Providing Designation 75A B/W in c.m.(1:3) in foundation and plinth -do-do- all comp.

Providing 12 mm thick plaster with c.m.(1:3) -do-do- all comp. job.

Providing painting two coats over new plastered surface -do-do- all complete

Providing granular filter media -do-do-all comp.

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joints for fixed ends of simply supported spans not exceeding 10.0m to cater for a horizontal movement upto 20 mm , covered with sealant complete as per drawing and technical specification

Providing and filling joint sealing compound as per drawing and technical specification with coarse sand and 6% bitumen by weight

Numbering and writing the culvert no. etc. -do-do- all complete

Providing P.C.C.M10 with nominal mix (1:3:6) in foundation -do-do-all complete as per specification and direction of E/I

Providing R.C.C.M20 in substructure -do-do- all complete

Providing R.C.C.M30 in superstructure -do-do- all complete(Drain cover)

HYSD bars

Providing P.C.C.M20 in substructure -do-do- all complete

Providing and fixing of Retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel iron angle post 75mmx75mm x6mm firmly fixed to the ground by means of properly designed foundation with M15 gradecement concrete 45cmx45cmx60cm ,60 cm below ground levelas per approved drawing(90cm Equilateral triangle)

Providing and fixing of Retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel iron angle post 75mmx75mm x6mm firmly fixed to the ground by means of properly designed foundation with M15 gradecement concrete 45cmx45cmx60cm ,60 cm below ground levelas per approved drawing(ii)60cmx60cm Square

Providing and fixing of Retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel iron angle post 75mmx75mm x6mm firmly fixed to the ground by means of properly designed foundation with M15 gradecement concrete 45cmx45cmx60cm ,60 cm below ground levelas per approved drawing(iii)80cmx60cm rectangular

Providing and fixing of Retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel iron angle post 75mmx75mm x6mm firmly fixed to the ground by means of properly designed foundation with M15 gradecement concrete 45cmx45cmx60cm ,60 cm below ground levelas per approved drawing(iv)60cmx45cm rectangular

Providing and fixing of Retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel iron angle post 75mmx75mm x6mm firmly fixed to the ground by means of properly designed foundation with M15 gradecement concrete 45cmx45cmx60cm ,60 cm below ground levelas per approved drawing(v)60 cm. Circular

Providing and fixing of Retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting ,1.5 mm thick supported on a mild steel iron angle post 75mmx75mm x6mm firmly fixed to the ground by means of properly designed foundation with M15 gradecement concrete 45cmx45cmx60cm ,60 cm below ground levelas per approved drawing(vi)90 cm. high Octagonal

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc ordinary Km. stone

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings.

Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973)

GST 12% will be added on Total amount quoted by Contractor

Labour Cess 1% will be added on amount quoted by contractor including 12% GST.

M/S SANJAY CONSTRUCTION

LAXMI NARAYAN JAISWAL

M/s KNP SINGH