Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.7 LAccepted-AOC 18969 A 1 SHRI GURU TEG BAHADUR NAGAR BIBIWALA ROAD STREET NO 15 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹23.0 L+₹5.0 L (28.2%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder | |
| 3 | L3₹24.6 L+₹6.6 L (37.1%)Rejected-Finance | L3 | Rejected-Finance Awarded being 3rd Lowest Bidder | |
| 4 | L4₹26.3 L+₹8.4 L (47.0%)Rejected-Finance | L4 | Rejected-Finance Awarded being 4th Lowest Bidder | |
| 5 | L5₹27.8 L+₹9.9 L (55.2%)Rejected-Finance | L5 | Rejected-Finance Awarded being 5th Lowest Bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
17 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S K Yadav GE(S) Bathinda
GE(S)Bathinda Bathinda Mil Stn
GE(S) BTD TOKEN NO 71 OF 2022-23 REPAIR REPLACEMENT OF JOINERY CUBOARD SHUTTER FRAMES STEEL GARAGE SHUTTER AND OTHER MISC WORK IN BLDG NO MP 180 MP 182 MP 185 MP 315 AND MP 316 OF JADUNATH AND BLDG NO P 23 P 24 P 18 AND P 27 P 33 P 03 OF
2023_MES_581507_1
GE(S)/BTD/TOKEN NO 71 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(S)Bathinda
Class D
Category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹60,000
Yes
23 Mar 2023
17 Feb 2023
20 Mar 2023
17 Feb 2023
17 Mar 2023
3 Mar 2023
Amount
Taking down chowkats or frame with shutter (without taking off shutters from the frames) n. exc 1.50 sqm each complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4.00 Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removed from site complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm)
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm)
S & F pressed steel frames for Cupboards with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm)
M & L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.
S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.
S & F 2nd class hardwood, factory made shutters, 35 mm thick plain framed panelled shutters (any number of panels) with with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both side. The size of rail & stiles as per IS :1003 (Part I), kiln seasoned and chemically preassure treated, complete all as specified and directed.
M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, including steel window/ventilators complete all as specified and directed.
S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars, including steel window/ventilators complete all as specified and directed.
Supply and fixing steel windows or ventilators fixed type with glazing bars, including steel window/ventilators complete all as specified and as directed .
Supply and fixing mild steel framed work such as grills,guard bars, gate, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed
Dismantling boarding, any description, fixed in any position as in cup board shutters, kitchen cabinet of any thickness fixed with nails complete all as specified and directed.
S & F in repairs 18/19mm thick prelaminated particle board, interior grade , fixed with screws to timber frame work complete all as specified and directed.
S&F in repair Plywood 18 mm thick grade BWR, type BB fixed with screws/nails to timber frame work and as in cupboard & cupboard shutter complete all as specified and directed.
M&L Decorative laminate type 1 of surface finish 0.9 mm thick, any colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
M&L Decorative laminate type 1 of surface finish 0.75 mm thick, white colour as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
Supply and fixing in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing complete all as specified and directed.
S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings
S&F Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple or fixed with beads supplied with joinery, complete all as specified and directed.
S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.
M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified and directed.
S & F Aluminuml Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
S & F Mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
S&F aluminium, anodised, 150mm length, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
S&F aluminium, anodised, 200mm length, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F Aluminum anodised handles cast type 150 mm long complete all as specified and directed.
S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.
S & F in repairs 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and directed.
S & F hasp & staple 100mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, 30mm, bright finish or electrogalvanised, width of flap (when open) complete all as specified and directed.
S & F in repairs 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/springs clips and fixing new ones complete all as specified and directed.
S & F for 3 mm thick, sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.
S & F for 3 mm thick, figured glass, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.
S & F welding in repairs n. exc 6mm thick metal and n. exc 2.50 cm in length complete all as specified and directed.
S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
M/S BHAGWATI CONSTRUCTION COMPANY
RAMA AUTOS
AABIA CONSTRUCTION
B D BATRA AND SONS
M/s Balvinder Singh Engineer and Contractors
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .