Widening and strengthening of Bhainswal to Babail road in 24 Panipat Constituency under CM Announcement no 26194 (shifting of HT/ LT Line only) Recall

Amount

[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages.

[24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm

Supply, stringing and sagging of GSL wire 8 SWG complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/UHBVNL)

Supply and erections of V-shape X-arm on PCC poles as per state electricity Nigam design and requirement it should be made out of MS channel size 100x50mm 13.200 Kg complete in all respect . (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of 11KV GI Pin insulator with Pin Rashtriya / Jayshree / BHEL make with pin with all labor and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works. (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing `H`pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (Make and specification as per UHBVNL.

Supply of Disc insulator Rashtriya / Jayshree / BHEL make with Disc fitting TandC type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work (Make and specification as per UHBVNL/UHBVNL)

Supply and erection of lighting arrestor model ALPRO / Alastem / LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resitar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply and erection of 185 Sqmm. 3 core XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work including Laying and erection of XLPE II kv HT aluminium conductor armoured cable ISi mark laid on surface/ pipe/cable tray with all labour and material as required. makes as per approved make list attached

Supply and erection of ACSR conductor (ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as jointing and binding with insulator at support complete in all respect up to entire satisfaction of Engineer-in-charge of the work. ACSR Cond. 50 Sqmm (Make and specification as per UHBVNL/DHBVNL).

Supply and erection of MS flat 50x6 mm including cutting, bending to the required shape, drilling hole, carriage Painting, loading, unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (by using steel of TATA / SAIL/RINL (Vizag) make only)

Providing and fixing of Nut and Bolt of size as per ISI specification of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

Providing and fixing of stay wire complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply of prestressed cement concrete pole as per IS :1678-1960 11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. buried 2.20 metre in ground. (Make and specification as per UHBVNL/DHBVNL) including Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.

Supply and erection of Earthing with earth rod Wt. 6.175 kg up-to the entire satisfaction of Engineer in-charge of the work (as per UHBVN Specifications)

Supply and erection of Stay Sets 8` long complete with MS X-Plat 460mm of Angle 65×65×6 Elbow and rod Wt. 13.80 Kg. Consisting of the following GI Rod, 20mm dia, 8 ft long, Wt. 6224 KG MS X-Plate 460 mm of Angle 65×65×6mm Wt. 5.336 KG GI Elbow and Nut Wt. 2.240KG up-to the entire satisfaction of Engineer in-charge of the work (as per UHBVN Specifications)

Supply and erection of T/F platform set as per satisfaction of Engineer-in-Charge of the work.

Supply and erections of Top Hamper complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply and erection of fuse unit LT side Board for use on DTs from for T/F complete in all respect. up to entire satisfaction of the Engineer-in-charge of the work.

Supply and erection of Barbed wire complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work

Supply and erections of D straps complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply and erection of LT insulator with all labour and material required to the complete the job included the fixing the same up to entire satisfaction of the Engineer-in-Charge of the works.

Dismantling of H-Pole

Dismentalling of 9/11Mtr. PCC Pole

Dismentalling of ACSR Conductor 50/80 Sqmm.

Dismantling of PVC ard. Cable 95 sqmm

Dismantling of Transformer Platform.

Erection of Transformer.

Supply and erection of MS channel, Angle, flat including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)