PERIODICAL SERVICES TO OTM/MD ACCN IN JP LINE MH PRO UNIT ML LINE AND PP LINE INCL WELCOME MAINT SERVICES UNDER AGE B/R-I CITY AREA ALWAR

Amount

S&F in repairs powder coated stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

Hacking out old broken glass of any thickness/size of any description from wooden/steel frame fixed with clips and putty and S&F with 3mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

Hacking out old broken glass of any thickness/size of any description from wooden/steel frame fixed with clips and putty and S&F with 3mm thick figured glass pin head type fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

Taking down carefully anodized aluminium doors/windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store, complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I removing to store, complete all as specified and directed.

S&F 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe, minimum weight - 210 gms ball valves any type all as directed.

S&F in repairs 20mm dia brass Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc. with and including plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified & as directed.

S&F in repairs vitreous china wash basin with pedestal , white of size 800mm x 475mm with and including PVC side cabinet and floor mounted cabinet of size 240mmx140mmx975mm and 780mmx440mmx800mm and mirror with PVC frame of size 560mmx800mm complete all as approved by GE. Make : Somany Cat Part No 10527 (Basin) & 16122 (Cabinet) , 170114 (Mirror), 160121 (Side cabinet).

S&F in repairs vitreous china wash basin white of size 550mmx400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand, CP waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repairs Jet spray chromium plated brass for EWC with and including PVC connection 900 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of poly ethylene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete.

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm bore fancy type center hole basin mixer without popup waste system but including plain waste 32mm size with aerator complete, cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore, brass chromium plated telephonic shower with 1.50 mtr long stainless steel braided flexible tube with nuts & nipple and hooks suitable for wall mixer or fixed independently and screwed down for iron pipe complete all as specified and as directed.

S&F in repairs brass chromium plated towel rack, 600mm long with lower hangers clips of approved pattern and make complete all as specified and as directed.

S&F in repairs 15mm bore, brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore brass chromium plated shower rose 65mm size with swivel joint type including fixing to steel pipe or union complete all as specified.

S&F in repairs sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with and including plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mmx160mm with and including 32mm dia waste pipe of polyethelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B-0 as required complete all as specified and directed

S&F in repairs Mirror cabinet PVC frame of size 400mm x 500mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted.

S&F in repairs factory made shutter cabinet of required size, fabricated by jointing for 18mm thick PVC celluca ply with prelaminated sheet on one side cut to desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted under or above the kitchen cooking platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding of any description complete all as specified and direceted. Note :- Items like cupboard knobs, stainless steel channel, CP plate clip hinges are deemed to be included in unit rates and for payment purposes only area of front elevation shall be measured and paid with no representations whatsoever.

S&F in repair 15mm bore fancy type, chromium plated bib tap cast copper alloy with crutch or butter fly handle complete all as specified

S&F in repairs 15mm bore Stop valve/angle valves, fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F as in repair 15mm bore, 2 way angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair chromium plated health faucet for EWC with and including PVC connection 1mtr long suitable for 15mm bore with all connected fittings complete all as specified and as directed.

S&F in repair PVC water storage tank lid for 500 ltrs capacity tanks, tighten with suitable size of nut bolts with spilt pin complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls or trenches/floor complete all as specified & directed

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls or trenches/floor complete all as specified & directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc all as directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L rendering 15mm thick in CM (1:4) on brick/stone wall surfaces or other than fair faces of brick work & surfaces, finished even and smooth without using extra cement with water proof compound. Note :- Water proofing compound shall be measured and paid separately here-in-after.

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

Preparing newly Plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty of approved tint all as specified and directed

Preparing newly pastered surfaces of wall & applying three coats of white wash complete all as specified.

Preparing newly plastered surfaces of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparing newly pastered surfaces & applying three coats of white wash on ceiling, soffits and the likes; all as specified.

Preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper (OBD) of approved shade/tint complete all as specified and directed.

Complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) complete all as specified and directed.

Complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) over a coat of 1mm thick wall care putty complete all as specified and directed.

Preparation of old decorated plastered/unplastered surfaces of ceilings and applying one coat of oil bound distemper (OBD) complete all as specified & as directed.

Preparation of old decorated plastered/unplastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

Complete removal of old decorated plastered/unplastered surfaces of walls and applying two coats of cement base paint of approved shade/tint complete all as specified & as directed.

Preparation of old decorated surfaces of walls, plastered or unplastered including cornices, pilasters etc and applying one coat of white wash, complete, all as specified and directed.

Complete removal of old decorated surfaces of walls, plastered or unplastered including cornices, pilasters etc and applying two coats of white wash, complete, all as specified and directed.

Preparing old decorated plastered/unplastered surfaces of ceilings & applying one coat of white wash complete all as specified.

Preparing, brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of colour wash complete all as specified and directed.

Complete removal of old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying two coats of colour wash complete all as specified and directed.

Preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

Preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

Complete removal of existing treatment on walls and preparation of surfaces and applying two coats of plastic emulsion paint of approved shade/tint complete all as specified & directed.

Complete removal of existing treatment on wall and preparation of surfaces and applying two caots of exterior emulsion apex paint of approved shade/tint (exterior grade) over one coat of primer complete all as specified & directed.

M&L writing letters or figures (Block, roman, italic or Indian) n.exc 30cm high complete all as specified and directed.

S&F in repair grating doom 100 mm dia of PTMT (minimum weight 25 gms) fixed with cement complete all as specified and directed.

S&F in repair 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified & directed

S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. complete all as specified & directed

S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed

S&F Width of flaps (when open) 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed

S&F in repair pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer, complete, all as shown in Drg No. TD/2004/29 sheet No. 1/3 to 3/3

S&F in repairs brass chromium plated godrej pattern cupboard lock, vertical type, in any size with escutcheon plates & two keys fixed in preseed steel cupboards complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25 thick PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregate) as in floors complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick in light shade(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L machine cut kota stone slab flooring 18-19mm thick laid over with and including 20 mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 40 mm thick PCC (1:2:4), Type B-1 (using 20 mm graded stone aggregate) as in flooring complete all as specified & directed.

M&L 75 mm thick PCC(1:3:6), Type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even with and including forming groove 10mm wide & 30mm deep and filled with bituminous filler at intermediate span n.exc. 5 mtr without using extra cement complete all as specified & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed

M&L machine cut kota stone slab 18-19mm thick in steps for riser, dado, skirting, wall etc laid over with and including 10 mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 18/19mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Dismantling framed timber scantling 40 Sqcm and over in section, in any position complete all as specified and as directed.

S&F MS steel work in tubular trusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 complete all as specified & directed

M&L Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

S&F in repair mild steel solid rubber beading of 20 to 40mm wide and 2 to 4mm thick fixing at bottom to existing doors complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets and removing from site complete all as specified and as directed.

M&L False ceiling with ArmGyp-FB ceiling tiles of 595mm x595mm, 9mm thick (as approved by GE) fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provision of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurer's instructions all as directed and specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm complete all as directed and specified.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed.

S&F 35mm thick IInd class hard wood factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed

M&L Factory made solid skelton wire gauzed moulded PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlycomplete all as specified & directed

S&F 300mm anodised aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed

S&F 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm anodised aluminium handles, cast type complete all as specified & directed

Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC (1:2:4) type B-0 to match the existing floor Fe-410 (Gde-E250 quality A).

M&L flat iron hold fast welded to angle iron frame for doors complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with and including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F powder coated anodised aluminium grill of any colour and pattern as approved for windows/ ventilators/doors complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F 4.80 mm thick sheet glass ordinary quality in squares n.exc. 0.5 Sqm each pane complete as directed

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per Sqm, top layer 15mm thick cement plaster (1:1/2:2) (1 part cement : 1/2 part coarse sand : 2 part stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed.

M&L treatment for sunken portion of floor as per following course of action complete all as specified and as directed :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaning the sunken portion including vertical wall surface complete all as directed. (ii) Providing 12mm dia holes of 40mm deep @ 2.00 m c/c at junction of beams and columns as co-ordinal points for inserting / pouring cement slurry by pressure grouting for sunken floors of toilets, including sealing the holes in CM (1:3). (iii) Sunken floor plastering with water proofing compound @ 2% by weight of cement and finishing the surface even and smooth without using extra cement. (iv) Applying evenly two coats of industrial bitumen 85/25 @ 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken portion of toilet including cleaning surfaces. (v) PCC (1:4:8), Type D-2 (using 40mm graded stone aggregate) as in filling (sunken portion) etc. Note : Water proofing compound shall be measured and paid under relevant item of this BoQ.

M/s Laxmi Enterprises

AARSINFRATECH

shiva construction

vandana enterprises

M/s ASK Enterprises

Hitesh Construction

RAMJI LAL & SONS