Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹6,240
Closing Date
22 Mar 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
SRINIVAS T
Providing 1 No of 11kV MCVCB at 66/11kV Bilikere Substation, TL&SS Division, Hootagalli, KPTCL, Mysore - Reserved for CAT-1
KPTCL/2024-25/SS/WORK_INDENT1980
KPTCL/2024-25/SS/WORK_INDENT1980
Reserved
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Mysuru
19 documents required · 19 mandatory
Qualifying Requirements for SUB-STATIONS and LINES as per 3.2(b) of ITT of standard tender documents
valid Super grade Electrical Contractor License issued by the Government of Karnataka as on the date of opening of techno-commercial bid (refer 2.3 of ITT)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years as per 3.10(iv) of ITT.
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded as per 3.10(xv) of ITT.
3.6: Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed Available Tender Capacity: (AxNx5-B)Where A-Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years (updated to FY 2024-2025) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B-Value, at FY 2024-2025 price level of existing commitments (KPTCL & Non-KPTCL)and on-going works (KPTCL & Non-KPTCL) to be completed during the next 1(One)year.Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(ii)A self-declaration is to be uploaded by the Tenderer stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
3.7: Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:- Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or- Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or- Participated in the previous Tender for the same work and had quoted unreasonably high Tender prices and could not furnish rational justification.
Valid ESI certificate
Valid EPF Certificate
Minimum Average Annual Turnover (MAAT) of the bidder for best one(01) year out of last preceding five financial years ending on March or December as the case may be, shall not be less than Rs. 4.99 Lakh as per 3.2(a) of std tender documents(ITT).
as per 3.10(iv) of ITT
Bidder shall ensure that soft copies of Power of Attorney, Letter of Undertaking, as revised in Annexure , Any other undertaking / agreement (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysore, after the last submission date and on or before the date & time of opening of techno commercial bids.
Bidder shall ensure that soft copies of Power of Attorney, Letter of Undertaking, No Deviation CERTIFICATE as revised in Annexure , Any other undertaking / agreement (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysore, after the last submission date and on or before the date & time of opening of techno commercial bids.
The bidder should furnish the works on hand details as per 3.10(v) of ITT.
Bidder shall ensure that soft copies of i. Letter of undertaking for Non performance ii. Letter of undertaking for Risk and Cost iii. Letter of undertaking for Litigation iv. Letter of undertaking to source the supply of equipment material from KPTCL approved Vendors only (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids as per 3.10(xviii) of ITT
i. Letter of undertaking to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India (Annexure-XVI) ii. Letter of undertaking as per clause No.1.5 of Annexure-XVII iii. Letter of undertaking as per clause No.1.6 of Annexure-XVII (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids.
Bidder shall upload selfdeclaration stating that no such actions against the bidder haven been taken by KPTCL in the last 6 months as on date of bid submission invoking Risk & cost, failing which the offer is liable to be rejected (refer clause 3.10(ii) of ITT.
As per 3.3(b) of K/W-4, , Each tenderer should further demonstrate Liquid assets and/or availability of credit facilities of no less than Rs. 1.5 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirements etc.(usually the equivalent of the estimated cash flow for three months in the peak construction period)
Clause 3.2b page 5 KW-1,2/3/4 i) Mandating satisfactory completion as a prime contractor for atleast one similar work of value not less than 25% of the cost of the contract. (Proceedings of the Government of Karnataka & Government order No. FD 480 EXP-12/2014 Bangalore dated 19.07.2014)
Any other required documents as per the terms and conditions of the tender.
Shall be uploaded besides submitting the xerox copies of same to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids.
Valid Caste Certificate in support of reserved tender participation
Valid Karnataka Residential Certificate
₹500
₹6,240
1 Mar 2025
1 Mar 2025
24 Mar 2025
12 Mar 2025
10 Mar 2025
Providing 1 No of 11kV MCVCB at 66/11kV Bilikere Substation, TL&SS Division, Hootagalli, KPTCL, Mysore
11kV UG cable 3 core 240 sq.mm for connecting 11kV Bank PCVCB to 11kV feeder MCVCB
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
RCC Hume Pipe, 2000 mm Long, 150 mm Dia
for Duct connecting place
Providing burnt bricks to cover on power cable
1.1 kV class Armoured Copper Cables
4core x 2.5 sqmm
1.1 kV class Armoured Copper Cables
1.1 kV class Armoured Copper Cables
19core x 2.5sqmm
6 sqmm lugs and ferrules for Copper Control cable
2.5 sqmm lugs and ferrules for Copper Control cable
50 mm Glands for Copper Control cable
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
11 kV GOS - D/B 400 A
Provision of 'H' frame for GOS mounting
9 kV, 10 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR
Pad Clamps for coyote
PG Clamp for Coyote to Rabbit
RCC Pole Clamp - GI
Copper Earth Bond 450 mm long
11kV special 3pin cross arm-GI
RCC pole clamp-GI for running GI flat at DP and for holding PVC pipe at breaker structures
Cast Iron Pipe of 100mm ID 13 mm thickness 2.75 mtr long with 2 part clampout of G.I Flat 50x6 mm continuously welded around the pipe using casting iron welding
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type) (8 TB's per Feeder) = (8x1 nos = 8)
2.5 Sq-mm multistrand copper wire
2.5 Sq-mm multistrand copper wire
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
(20 mtrs for each panel)(20x1=20mtr)
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm (80 lugs/panel x 1= 80)
C-type channel of size 50x100x50x6mm
(50cm/panel) = (0.5m x 1 nos = 0.5Mtrs)
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
(Size: 32mm dia)
CT TB's - 6 nos for each panel
11 kV MCVCB, 500 MVA, 25 kA, 1250 A feeder.
Feeder Panel SCADA compatible
Wiring, Testing and Commissioning charges
Releasing and Re-erection of 11KV MCVCB, Crompton Greaves 25 ka, 1250 A breaker including control Wiring
Wiring, Testing and Commissioning charges
Releasing and Re-erection of 11KV MCVCB adaptor panel
Annunciator Panel for one Feeders
11kV UG cable 3 core 240 sq.mm for connecting 11kV Bank PCVCB to 11kV feeder MCVCB
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing.
The rate includes the cost of material, la...
1.1 kV class Armoured Copper Cables
4core x 2.5 sqmm Copper Control cable for AC supply
1.1 kV class Armoured Copper Cables
4core x 6sqmm Copper Control cable for DC supply
1.1 kV class Armoured Copper Cables
19core x 2.5sqmm Copper Control cable
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
11 kV GOS - D/B 400 A
Provision of 'H' frame for GOS mounting
9 kV, 10 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR
Base concreting 1:2:4, 650x650x150 mm
Pole concreting 1:2:4, 650x650x1700 mm
Coping 1:2:4 (as per actuals)
Modification of D/B GOS for Open Delta operation with material and Labour
Grounding of equipment using cast iron pipe electrodes (Labour)
Grounding of equipment with 50 x 6 mm G.I. Flat and
connecting equipment to the earthmat/ground pit. Each point
of earthing with all formation works like bending, twisting,
drilling of holes and conne...
Supplying and laying of MS Flats 50x6 mm of various sizes, welding and
applying ACB paint to welded portion and covering with
sodium bentonite clay as per the drawing/standard specification and consol...
Supplying and spreading 100mm thick with 20/25mm jelly with all lead and lifts.
Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Control Cable - 10 Copper core x 1.5sqmm
(From remote contol desk to RTU) (15mtrs x 1 nos (1 cable for 1 feeders) = 15 mtrs)
Signal Cable - 10 Copper core x 0.5sqmm
Feeder to Feeder loop = 5mts x 2 nos =10mtrs)
Remote control desk to RTU (for DI): 15mtrs x 1 Nos. = 15 mtrs
1.5 Sqmm Grey wire for interfacing of DI and DO
(20 mtrs for each panel)(20x1=20mtr)
Configuration of RTU and Engineering along with validation of data at SLDC
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying to required line and slope roofing with semicorrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and...
Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, includin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Volume II A and B Tech specifications.zip
Technical Information / Worksheet • 20.13 MB
BOQ Bilikere 01 MCVCB SEC CAT1.pdf
Others - Bill of Quantities-BOQ • 0.36 MB
Work on Hand details format (Tender).doc
Others - Works on hand • 0.06 MB
2b. Tender documents - Bilikere 11kV 01 MCVCB CAT1.docx
Tender Document • 0.39 MB
2a. NIT - Bilikere 11kV 01 MCVCB CAT1.docx
Others - NIT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .