Construction of Main Pumping Station and Clinical Effulent Treatment Plant (350 KLD) based on any suitable sustainable and Proven Technology including O and M of MPS and CETP for 5 years after commissioning in Govt. Rajindra Hospital and GMCC Patiala

Amount

Earth work in excavation in Foundations Trenches etc., for storage and sedimentation tanks, high level tanks, filter

Cement Concrete 1:8:16 with 40 mm gauge stone aggregate using concrete mixing volumetric type

Cement Concrete 1:6:12 with 40 mm gauge stone aggregate using concrete mixing volumetric type

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixing volumetric type

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

12.5 mm thick cement plaster in 1:4

Cement rendering on plaster 1mm th.

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Providing Installing & Commisioning of electric driven horizontal Submersible sewage Pump set Capable of delivering 560 LPM with 10.0Mtr Head including suitable control panel complete in all respect and 980-1000 RPM with base frame complete in all respects.

Providing installing and commissioning of 1No Diesel Generating Set 5 KVA /3 Phase water cooled silent diesel Gen-Set comprising of Suitable capacity of engine & alternator mounted on commonn base frame along with fuel tank Std control panel residence exhaust silencer, AVM pads , Battery , Battery leads . First fill of tube oil housed in silent encloser along with 4 Nos G.I. earthing complete in all respect.

Providing & Fixing transformer of 10 KVA 3- phase, 4 wire,50 Hz,11 KV/433V Wound.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1.6 as per ISI

100mm i/d Sluice Valves flanged

150 mm i/d Sluice Valves flanged

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. (Up to 300 mm i/d)

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:8329-2000, Class-K9 and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

100mm i/d pipe line laid complete

150mm i/d pipe line laid complete

Embedding 100 mm dia UPVC rain water of 2.5 kgf/sqm as per ISI 4985 pipe in cement mort during masonery work.

50mm thick ironite (Metallic Floor Hardener to be mixed with Granolithic topping for heavy duty floors)

115 mm thick brick wall laid in cement sand mortar 1:4

Cement Pointing 1:2 Deep Variety

Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together , at the end, by and locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exect size of opening where rolling shutter is to be fixed)

Supplying and fixing of Pressed steel sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiveing tower bolts and finished with 2 coats of ready mixed painted lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs comple

Supplying openable steel windows, of standard rolled steel Z sections, joints mitred and Electrically flash-welded, with iron fittings incluidng necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer

Terracing consiting of tiles 22.86x11.43x 3.83cm laid in Cement sand morter (1:3) including 6mm thick cement plaster (1:4)on top with two coats of hot bituman with 10 cm mud and two layers of 25mm mud plaster asper item of CSR

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Providing and fixing stair case railling made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars rivetted of molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Foot rest for main hole P/F orange colour safety Foot rest

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Nuts and Bolts of all sizes for fixig flat. & Specials

Cold twisted detormed (Ribbed/ ToR steel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete

Wiring in insulated copper conductor single core FRLS cable ( ISI MARKED) 1100 volts grade to be laid in heavy guage welded conduit pipe 20mm/25mm dia (1.6 mm thick ISI marked ercessed in wall etc. complete with powder coated/anodized concealed metal box asper Item of CSR . i) Fan point

Wiring in insulated copper conductor single core FRLS cable ( ISI MARKED) 1100 volts grade to be laid in heavy guage welded conduit pipe 20mm/25mm dia (1.6 mm thick ISI marked ercessed in wall etc. complete with powder coated/anodized concealed metal box asper Item of CSR . (i)Wiring light points

Wiring in insulated copper conductor single core FRLS cable ( ISI MARKED) 1100 volts grade to be laid in heavy guage welded conduit pipe 20mm/25mm dia (1.6 mm thick ISI marked ercessed in wall etc. complete with powder coated/anodized concealed metal box asper Item of CSR (i) Wiring 3 Pin 6 Amp wall sockets

Wiring in insulated copper conductor single core FRLS cable ( ISI MARKED) 1100 volts grade to be laid in heavy guage welded conduit pipe 20mm/25mm dia (1.6 mm thick ISI marked ercessed in wall etc. complete with powder coated/anodized concealed metal box asper Item of CSR . (i) Wiring 3 Pin 16/20 Amp power plug control

Structual steel work in angles, tees, flats, rivited, including cutting, fixing all guset plates, bolts, nuts, rivets etc. with hoistng and erecting in position.

Survey, Soil testing, Design, Supply and construction, Installation, Commissioning of Clinical effluent treatment plant (350 kld) based on any suitable, sustainable and proven technology including other appurtenant works on turnkey basis as per DNIT. (As per terms, Condtions & specifications attached)

Operation & Maintenance of proposed Pumping Station & Clinical Effluent Treatment Plant (CETP) of capacity 350 KLD

1st Year

2nd Year

3rd Year

4th Year

5th Year