Reparing OF WORKING SHED 18.0X40.0 FEET AT RAJKIYA UDHYAN PALIWAL PARK AGRA

Excavation in foundation in ordinary soil (Loam,clay or sand ) including lift upto 1.50 m and lead upto 30m , including filling watering and ramming of excavated earth into the trenches and removal & disposal of surplus earth as directed by the Engineer-in-charge up to the distance of 30.00m from the foundation trench ... complete item

Cement Concrete with 4 cm gauge stone ballast , Coarse sand and cement in the proportion of 1:4:8 including supply of all material and labour, Tools & Plants etc. required for proper completion of the work.

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. SI.No-10.15.1

Provinding and fixing G.I.Chain link fabric fencing mesh 25x25 mm with GI Wire made of G.I. Wire dia 3 mm (dia3mm)DSR No. 16.7

M-150 Brick work in 1:6 cement Coarse sand in foundation and up to plinth …. Complete item

M-150 Brick work in 1:4 cement Coarse sand in superstructure …. Complete item

12 mm thick Plaster in 1:6 cement sand … complete item.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR : 12.5)