8765REPAIR MAINT OF INTERNAL ELECTRIFICATION FITTING FIXTURES AND LIGHTNING CONDUCTOR CHEMICAL CONVENTIONAL EARTHING INFRASTRUCTURE AND CONNECTED ACCESSORIES UNDER AGE E M EAST OF GE M AF JALAHALLI

Amount

Taking down carefully copper/aluminum point wiring (light, fan,Power) complete fittings such as switches , ceiling roses pendents , regulators sockets light fittings etc removing to store for keeping in safe costody or for taking credit and making good disturbed surface of wall, floors , roof etc all as specified.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing&caping/conduit size of not less than 20mm on surface of wall including provn of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as per site requirement for One light point controlled by one switch one way 5 Amps all as specified and directed.

All as per item Srl No 2 herein before but One light point controlled by one two way switch 5 Amps

All as per item Srl No 2 herein before but One ceiling fan point controlled by one switch one way 5 Amps

All as per item Srl No 2 herein before but One Exhaust fan point controlled by one switch one way 5 Amps

All as per item Srl No 2 herein before but One call bell point controlled by one switch one way 5 Amps

All as per Sl Item no.2 herein before but with One 2/3 pin socket outlet 5Amps on independent board

All as per Sl Item no.2 herein before but with One 2/3 pin socket outlet 5Amps on same Board board

All as per item No 2 herein before but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

S&F switch piano flush type single pole one way 5 Amps

S&F switch piano flush type single pole two way 5 Amps

S&F ceiling rose surface bakelite 3 terminals 65x50mm

S&F Call bell push flush type single pole one way 5 Amps

S & F in repair stepped type electronic fan regulator flush type 100 Watts

S&F switch socket combination 2 in 1, 3 pin 5 Amps flush type

S&F Switch socket combination multipurpose 5/16 Amps, 5 in 1, 4 / 5 hole flush type

Supply & Fixing T-5 tube rod 28 watt.

Supply & Fixing tube rod T-5, 14 watt.

Supply & Fixing LED Retro bar tube rod 18/20 watt.

Supply & fixed in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 1X20 Watt 4 Feet.

Supply & fixed in repair decorative recessed mounted ultra slim square profile 1X1 feet 20 W LED lighting fixture Squre shape with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 20 Watt and including cosidering material & labour for fixing ceiling hight upto 15 Mtr, all as per site requirement and directed by Engr-in-Charge .

Supply & fixed in repair decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 1X10 Watt 2 feet.

Supply and fixing Surface/recessed mounted LED luminaire 600 mm x 600 mm, 36/40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size and including cosidering material & labour for fixing ceiling hight upto 15 Mtr complete.

Supply and fixing round shape 18/20 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing building security/ LED street light fitting 35 Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal, management in multiple optics complete with IP 65/66 protection complete.

Supply & Fixed in repair LED Lamp 9 watt including holder batten type as per site requirement complete all as specified and directed

Supply and fixed in repair Modular switch 1way 6A,1module

Supply and fixed in repair Modular socket, 6A-2/3 pin combined 2 module

Supply and fixed in repair Modular switch, 16 A 1 module

Supply and fixed in repair Modular socket, 6A/16A-2/3 pin combined 2 module

Supply and fixed in repair Modular fan step regulator, 120w-2module

Supply and fixed in repair of switch socket combination 2 in 1, 3 pin 5 Amps flush type complete all as specified & directed.

Supply and fixed in repair of Switch socket combination multipurpose 15/16 Amps, 5 in 1, 4 / 5 hole flush type complete all as specified & directed.

Supply and fixed in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc

Supply and fixed in repair Lamp holder angle type made of PVC/Polycarbonate with back plate.

Supply and fixed in repairs Plastic laminated Hylam sheet fixed for switch boards, MCB DB Covers etc cutting to suitable size including making slots for fixing swithces, sockets regulator,MCBs etc. & other purposes as required complete including replacement of rusted screws, nuts bolts accessories and connected items all as per site requirement, specified and directed by Engr-in-Charge.

Supply and fixed in repair of MCCB 125 amps 4 pole 16 KA 415 volt complete all as specified & directed.

Supply and fixed in repair of MCCB 100 amps 4 pole 16 KA 415 volt complete all as specified & directed.

Supply and fixed in repair of MCCB 63 amps 4 pole 16 KA 415 volt complete all as specified & directed.

Supply and fixed in repair, sheet metal enclosure distribution box suitable for MCB'S 4 way TPN 415 volts with 200 Amps rated bus bar double door complete including connecting up all as specified and making good distrubed surface

All as per item No. 40 herein before but 12 way SPN with 200 Amps rated bus bar , 240 volts

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TP 25 To 63 AMP current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 25 To 63 AMP current carrying capacity in the DB complete with connection testing and commissioning.

Taking down sub main wiring of any size complete all as specified and directed.

M&L for sub main wiring with two single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 4 sqmm copper conductor cable as earth conductor of 4.0 sq mm and conduit accessories fixed up in surface including connecting up complete all as specified and directed.

All as per item no 47 herein before cable size of 6.0 sqmm

M&L for sub main wiring with Four single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 6 sqmm copper conductor cable as earth conductor of 6.0 sqmm and conduit accessories fixed up in surface including connecting up complete all as specified and directed.

All as per item no 49 but cable size of 10.0 sqmm Note for item No 46 to 49 :-Two/four run of cable and one run of earth continuity copper conductor and non metalic PVC conduit shall be measured as one unit length.

Taking down ceiling fan of any size, type and make after disconnecting the electrical connections, cleaning, servicing , greasing removing and replacing all the unserviceable spare and re-fixing the same back to the original location all as directed Note: (i) The rate quoted shall be deemed to include the cost of painting and spares such as split pin , clamp, screws washers etc.

Taking down Exhaust fan/fresh air fan of size 250/300/350 mm of any type & make after disconnecting the electrical connections ,cleaning, servicing , greasing removing and replacing all the unserviceable spare re-fixing the same back to the original location all as directed. Note: (i) The rate quoted shall be deemed to include the cost of painting and spares such as split pin , screws washers etc.

Supply only Capacitor 2.5 mfd for ceiling fans.

Supply only Capacitor 4 mfd for exhaust fans.

Supply only the mounting clamps and rubber bush with nut, bolt, washers, locking clip etc complete suitable for fixing at the down rod suitable for fixing the ceiling fan.

Supply only twin core flexible wire 1 Sqmm for connecting up ceiling fans, exhaust fans/wall mounting fan etc.

Taking down old burnt out copper winding wire from ceiling fan of 1200/ 1400 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing,heating, cleaning, servicing,greasing,refixing at site,testing, commissioning for smooth functioning complete all as specified & directed.

Taking down old burnt out copper winding wire from fresh air fan/exhaust fan of 230/300 mm sweep and rewinding by using the same gauge of copper wire super enameled including heating and varnishing,cleaning, servicing,greasing, cement work refixing at site and testing commissioning for smooth functioning complete all as specified & directed.

Supply & fixing Louver Metel Body for exhaust fan upto 450 MM sweep fix out side of exhaust fan hole on wall up to hight of 15 Mtr/GF/FF/SF with fixing accessories complete all as per site requirement and specified by Engr-in-Charge.

Supply and fixing LED Target/flood light 70 watt 230 V AC outdoor/Indoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp for target/focus on wall with complete accessories and connected items all as per site requirement, specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting 1x20 Watt flame proof led light fitting CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etcprewired and including connecting up with three core flexible copper conductor cable with suitable size complete accessories and connected items all as per site requirement, specified and directed by Engr-in-Charge.

Supply and fixing Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V with complete parts and accessories, connected items all as per site requirement, specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including galvanised earth strip of size 25x4 mm (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth strip by means of bolts, nuts, checknuts and washers made out of galvanised iron and connected to earth test point as shown in electrical plate No. 3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20mm bore medium grade, wire nuts and lugs including taking down old u/s one complete all as specified and as directed.

S&F in replacement of galvanised iron strip of size 32x6mm burried in ground or fixed on wall with suitable epoxy base insulator on wall/floors and connected to test point including bending, jointing at test points with 2 Nos GI nuts, bolts, with lead washers, jointing strips at all joints complete all as specified and as directed.

S&F in replacement of aluminium strip 25x3mm fixed with epoxy based insulator for down conductor air terminal network including drilling two Nos holes at each joint, one set of lead washers between strips, two sets GI nut and bolt, gutties, screws etc. complete all as specified and as directed.

S&F in replacement earth continiuty conductor or main earthing lead fixed on wall on batten or recess or chases or buired in ground or drawn in conduit / pipe or fixed to pole or any other indicated suituation for loop earthing etc, as required for copper strip 32 mm x 6 mm with proper saddles/spacer, screw etc., complete all as specified and as directed. Note : All joints of copper shall be of brazing only

S&F in replacement Earth continiuty conductor or main earthing lead 4mm fixed on wall on batten or recess or chases or buired in ground or drawn in conduit / pipe or fixed to pole or any other indicated suituation for loop earthing etc, as required for galvanised iron wire 4 mm dia with proper saddles / spacer, screw etc, alll as specified and directed. Note : All joints of copper shall be of brazing only

Taking down and refixing of existing aluminium strip 25x3 mm by brazing at each joints between strip including saddle/insulator/PCC block where required complete all as specified and as directed.

Taking down and refixing of existing GI strip 32 X 6 mm brazing at each joints between strip including saddle/insulator/PCC block where required complete all as specified and as directed.

Taking down and refixing of existing copper strip 32 X 6 mm brazing at each joints between strip including saddle/insulator/PCC block where required complete all as specified and as directed.

Taking down and refixing of existing GI wire 4 mm dia laid in ground or wall with epoxy base insulator including welding the joints and connecting to test point complete all as specified and as directed including taking down old

S&F in repair test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed.

S&F in replacement of air termination single pointed aluminium rod of 12mm dia 300 mm long fixed to strip/pipe including drilling holes, nuts, bolts washers for resting/ supporting of air terminals etc. complete all as specified and as directed.

S&F in replacement of air termination single pointed copper rod of 12mm dia 300 mm long fixed to copper strip including drilling holes, nuts, bolts washers for resting/ supporting of air terminals etc. complete all as specified and as directed.

Refixing of air termiantion single pointed Aluminium rod 12mm dia 300mm complete all as specified and as directed.

Refixing of air termiantion single pointed copper rod 12mm dia 300mm complete all as specified and as directed.

Repairing and maintenance of old existing earth pit by taking out carefully earth plate, watering pipe, earth lead protection pipe and re-buried the same after removing sludge from the plate & pipes including re-connection/brazing the plate and strip, whichever is required at site (Earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 metres below normal ground level,complete all as specified and directed including PCC 1:3:6 type C1 pit with cover of RCC 1:2:4 type B1,reinforced with welded steel wire fabric not less than 4 kg per sqmtrwith handle andangle iron frame,watering arrangment with 20 mm bore GI medium grade pipe ISI marked, GI funnel with GI mesh,filling with mixture of commen salt and charcoal,necessary excavation, refilling, removing away soil and earth work in any type of soil including test point, testing and commissioning complete all as specifed and as directed. Note : GI Funnel, brazing, mixture of salt/char coal/MGSO4 shall be measured and paid separately under releavant items.

S&F in repair GI funnels for earthing complete all as specified and as directed.

Supply only of common salt commercial complete all as specified and as directed.

Supply only of charcoal dust complete all as specified and as directed.

Supply only PCC block of size 150 x 150 x 150mm in PCC (1:3:6) type C-1 with 20mm graded aggregate for fixing of roof conductor/air termination rod/GI strip etc. complete all as specified and as directed.

Supply only back filling compound for earthing complete all as specified and as directed.

Supply only magnesium sulphate (MGSO4) for earthing complete all as specified and as directed.

M&L for Brazing of copper/Aluminium/GI strip for continuity of Earthing strip complete all as specified and as directed.

M&L for Testing of earth resistance of earth pit and writing of earth resistence value in existing board complete all as specified and as directed. Note:- (i) The contractor has to arrange his own testing kit of suitable range for checking of earth resistence and making complete a list of checked Earthpit Value.

M&L for Earthing complete with copper earth plate electrode of size 600 x 600 x 3.15 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including copper earth strip of size 20x3 mm (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth strip by means of bolts, nuts, checknuts and washers made out of galvanised iron and connected to earth test point as shown in electrical plate No.3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20mm bore medium grade, wire nuts and lugs including taking down old u/s one complete all as specified and as directed.

Supply and fixed in repair for 40 mm bore galvanised steel water tubing light grade with all fitting fixed to wall and ceiling or laid in floors complete all as specified and as directed.

Supply and fixed in repair for 40 mm bore galvanised steel water tubing light grade with all fitting fixed to wall and ceiling or laid in trenches complete all as specified and as directed.

Supply and fixed in repair for 25 mm bore galvanised steel water tubing medium grade with all fitting fixed to wall and ceiling or laid in floors complete all as specified and as directed.

Supply and fixed in repair for 25 mm bore galvanised steel water tubing medium grade with all fitting laid in trenches complete all as specified and as directed.

Supply and fixed in repair for 15 mm bore galvanised steel water tubing medium grade with all fitting fixed to wall and ceiling or laid in floors complete all as specified and as directed.

Supply and fixed in repair for 15 mm bore galvanised steel water tubing medium grade with all fitting laid in trenches complete all as specified and as directed.

S & F in replacement Bib Tap of 20 mm dia standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

S & F in replacement Bib Tap of 15 mm dia standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

M&L for Cutting the existing GI pipe of any size for tapping or new connection with 25 mm including required fitting complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying pipe line and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm thick with dry type of soil complete all as specified and as directed.

Removing excavated surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for earthing pit chamber of size 0.45 x 0.45x 0.45 m and 150 mm thick by PCC 1:3:6 type C1 with 20 mm graded stone chamber with RCC 1:2:4 type B1 in cover slab complete all as specified and as directed.

M&L for earthing pit only chamber cover of size 0.45 x 0.45x .04 m with RCC 1:2:4 type B1 with 20 mm graded stone complete all as specified and as directed.

S&F of CI pit cover of suitable size for existing earthing pit complete all as specified and as directed.

M&L for fixing earth indicators made out of 3 mm thick MS sheet of size 200mm x 300mm duly fixed in MS angle iron 25mmx25mm of 450 mm long to be fixed to ground by means and including neceaary cement concrete and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete, writing earth reading and connected palnt / panel etc, and excavation and earth work complete all as specified and as directed.

M & L for Aluminium strip 25X3.15 MM wth saddels and fixing screws etc, for roof conductors and down conductors above ground with require connected items complete all as specified and as directed.

M & L for Copper strip 20X3.15 MM wth saddels and fixing screws etc, for roof conductors and down conductors above ground with require connected items complete all as specified and as directed.

M & L for Copper strip 32X6MM buried in ground with require connected items complete all as specified and as directed.

Cutting chassis in brick surfaces n. exc. 10cm girth for concealed conduit wiring and making good the surface to match the adjoining surfaces.

ARUNOTHAYA TRADERS

M/S SRI BALAJI ENTERPRISES

RAMESH BABU CO

eurekaenterprises

CITIZEN ELECTRICALS