WBPHED/EE/NMD/NIeT- 17 OF 2024-2025SL 01

Amount

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works .

2 Row 12 Module

4 Module

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Average run 9 mtr

Average run 5 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.

On Board

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supply and fitting fixing of 90W LED(BRP 033LED90CWSLRGRPSUSPSD ) if Philips or equivalent spec of other app make fixture,IP65 on the top of the pump house and it includes the cost of hiring of ladder and making necessary connection by supplying bracket arm 2 inch X 1.5 Inch , 1.5 mtr length and as per direction of EIC.

Supply and fitting fixing of highbays light BY515 LED 100S 5700 NB S1PSU GR if make philips or equivalent spec of other approved make.

Supply and fitting fixinf of LED tube TMC 502 2XT-LED with LED TUBE of 1200mm 18W 2100lm if philips or any other make of equivalent spec.

Supply, delivery & installation of the following Fan as directed by EIC. a) Ceiling Fan 1200mm sweep OR b) Wall mounting Fan 400 mm sweep including Fan clamp as and when required.

600 mm pedestal fan air circulator if Orient or equivalent spec of other approved make.

300 mm exhaust fan venti air DS of Havwlls or equivalent spec of other app make.

Supply, delivery at site of following cables

1.1KV grade 3.5Core 300sq.mm XLPE Insulated Al. Ar. Cable for connection between WBSEDCL Metering Panel to PDB Cum MCC Incomer ( 2 run for each incomer)

1.1KV grade 4Core 10Sq.mm XLPE Insulated Al. Ar. Cable for connection between PDB Cum MCC to LDB

1.1KV grade 2Core 4Sq.mm XLPE Insulated Al. Ar. Cable for connection between PDB Cum MCC to Motor Space Heater

1.1KV grade 12Core 2.5Sq.mm PVC Insulated Multistrand Copper Ar. Control Cable for connection between PDB Cum MCC to LPBS for Main Motor

Laying of one cable upto 150 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire

Up to 50 sqmm

Supply & delivery of the PVC moulded Chair .

Supply & delivery of thePVC moulded Table

Supply, delivery , fabrication and installation of valve and pipe support ,operating platform,walkway etc with all accessories to complete the job as per enclosed NIeT specification .

LDB for Indoor & Outdoor Lighting. The LDB shall be 2 mm thick CRCA sheet steel enclosed wall mounted type with maximum operating height of 2000 mm and minimum operating height of 800 mm. The board will have following feeders. (a) One no. 32A TPN MCB as incomer. (b) 6nos. 6A SP MCB for Internal lighting. (c) 3nos. 10A SP MCB for internal High Bay lighting. (d) 2nos. 16A SPN MCB for socket outlet. (e) 4nos. 20A SP MCB as socket outlet. (f) 2nos. feeders with timer operated automatic control of periphery and street lighting. The board will have cable entry from top and bottom with detachable gland plates.

Supply delivery and installation of Dewatering Pump Q=01-23m3/hr,H=12-26mtr,Single phase ,50 Hz(1Hp) with pipe line arrangement .(Considering 20m pipe line of 40 mm dia)

NB : Make as per PHE approved vendor list.

Add GST @18%

Add Labour Welfare Cess @1%

DAS ENTERPRISE (BID ID -5795091)

EASTERN INDIA SALES AND SERVICE (BID ID -5789583)