SITC of taxi light and AFL cable

Supply of FAA Certified LED type Elevated Taxiway Edge light fixtures up to 12 Watts & meeting ICAO requirments LED lamp of series circuit 2.8 - 6.6 amps current, complete with base plate, breakable coupling, mounting assembly, gasket, BLUE lens, one 2 pole plug with leads etc. conforming to particular specification as required.and suitable for operation control and monitoring on existing ALCMS(Airfield Lighting Control and Monitoring System)

Supply of FAA Certified Airfield Lighting (AFL) 5 KV grade, Single Core, Copper Conductor, Copper shielded, XLPE insulated, and with inner and outer semi conductor, Polyethylene (PE) outer sheathed, Copper Braid, Unarmoured Underground Cable for airfield lighting Primary Circuit, confirming to specification as specified in technical specification of the following sizes as required and suitable for communication on existing ALCMS system. ( Cable resistance shall be less than 5 Ohms per KM.) a) 6 sq. mm.

Supply of FAA Certified following rating 5000V, 50 Hz series Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable to be operated via ALCMS System confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on ALCMS a) 30/45 Watt, 6.6A/6.6A (suitable for Taxi Edge Lights fittings)

Supply of FAA Certified following rating 5000V, 50 Hz series Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections confirming to specification as required suitable for above mentioned fittings for following applications. (a) 45 Watt, 6.6A/6.6A (for sign board )

(b) 100 Watt, 6.6A/6.6A (for sign board )

Supply of FAA Certified following sizes 5 KV grade dry type plug and receptacle of type I, class 'B' primary connector kit with field attachment and suitable for 5 KV grade single core copper conductor, copper braided, XLPE insulated PE outer sheathed shielded cable, complete as required confirming to the technical specification. a) 6 sq. mm.

Supply of FAA Certified LED Type Guidance Sign Board of various sizes made out of anodized 2 mm thick Aluminium frame with suitable angle support and 1.5 mm thick al. backcover, 4 mm thick polycarbonate sheet with glare free front face, the letter & symbol should be screen printed / on inside face with required colouring, suitable arrangement shall be made for water tighness & locking arrangement, including supporting frangible legs & frame etc., signboard shall be uniformly inernally illuminated with required numbers of LED lights to achieve illumination level and can operate on series circuit without flickering, complete as required and as specified in ICAO Annex. 14 Vol. I (legends as approved by Engineer-in- Charge).

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia medium class including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I.pipe medium class from earth electrode including connection with G.I. thimble excavation and re- filling as required.

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing as required.

Supply and laying of high density polyethylene DWC HDPE pipe, complete with accessories like couplers, bends, tee etc. in the soil for GLF work upto 750 mm deep, back filling & making good the same as per site requirement & as per specification. a) 50 mm OD

Fabrication, supply & installation of MS Transformer housing box of size 330 mm x 330 mm x 400 mm (H) made out 6 mm thick MS sheet and top cover 10 mm thick MS sheet as per drawing and all inserts should be suitable for M-10 size, bolts shall be of SS including painting of box inside & outside with one coat of primer & two coats of black enamel paint and installation using cement concrete 1:2:4, 100 mm all around the box and pedestal of 0.30m & 0.10m thick all around the box making suitable slope to level of runway all around the housing box and painting, lettering, numbering etc. as required. a) Installation of housing box in soil area

Laying of one number PVC insulated & PVC sheathed armoured / unarmoured aluminium / copper conductor AFL / power cable of voltage grade exceeding 1.1 KV but not exceeding 11 KV of size not exceeding 25 sq. mm. in the existing cable duct / masonary trench / RCC / HUME / METAL / GI / HDPE pipes etc. as required.

Installation, testing & commissioning of guidance sign boards of various size i/c installation of isolating transformers and providing secondary leads, ESNA connector etc. i/c supply of all material except isolating transformer etc. as required and providing all around 150 mm thick PCC of 1500 mm from the edge of sign board.

Installation, testing & commissioning of taxiway light fixtures on existing transformer housing boxes I/c installation of isolating transformers, lamps,etc. as required.

Providing, laying and fixing following dia G.I. pipe (medium class) with G.I. fittings in soft soil upto a depth of 300 mm and making good the surface. a) 40 mm dia

AMA Private Limited

M/s J.K. Electric Engineering Works