Construction of residential quarters for Type VI in ICF

A-Items covered under DSR 2021

B-Supply of steel

C-Items not covered under DSR 2021

D-Items not covered under SRUSSOR 2011

Item Breakup - A-Items covered under DSR 2021

course of half brick masonry. 8.0 CLADDING WORK ICF HQ-ENGINEERING/ICF Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture 8.2 laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, 8.2.2 Cherry/Ruby red 32 8.2.2.2 Area of slab over 0.50 sqm Sqm 41 4425.35 181439.35 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., 8.3 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 33 8.3.2 Granite work Metre 60 418.85 25131 8.5 Extra for providing opening of required Each 10 808.15 8081.5 size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and 34 similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 8.20S STONE WORK DRY CLADDING 8.31 Providing and fixing Ist quality ceramic Sqm 680 1063.45 723146 glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by 35 Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9.0 WOOD AND P.V.C. WORK 9.1S FRAMES AND TRUSSES Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in 9.1 position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 36 9.1.1 Second class teak wood cum 4.5 131576.95 592096.28 Providing and fixing 25 mm thick shutters 9.16 for cup board etc. : Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination 9.18 Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 37 9.18.1 18 mm thick Sqm 50 1089.3 54465 ICF HQ-ENGINEERING/ICF Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard 9.20 wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Sqm 170 3086.1 524637 38 Stainless Steel butt hinges with necessary screws Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard 9.21 wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 35 mm thick including ISI marked Sqm 9 2015.75 18141.75 39 Stainless Steel butt hinges with necessary screws 9.23 Extra for providing lipping with 2nd class Sqm 179 401.4 71850.6 teak wood battens 25 mm minimum 40 depth on all edges of flush door shutters (over all area of door shutter to be measured). 9.26 Extra for cutting rebate in flush door Sqm 55 93.65 5150.75 41 shutters (Total area of the shutter to be measured). 9.40S MISCELLANEOUS-WOOD WORK 9.42 Providing and fixing 18 mm thick, 150 Metre 50 511.55 25577.5 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( 42 heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board 9.44 conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. 9.44.2 Particle board with decorative veneering Metre 50 107.05 5352.5 43 on both sides 9.45 Providing and fixing teak wood lipping of Metre 50 61.5 3075 44 size 25x3 mm in pelmet. Providing and fixing nickel plated M.S. 9.47 pipe curtain rods with nickel plated brackets : 45 9.47.2 25 mm dia (heavy type) Metre 6 159.35 956.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with 9.48 M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings /wooden frames with Kg 4900 197.7 968730 46 rawl plugs screws etc. ICF HQ-ENGINEERING/ICF 9.53 Providing 40x5 mm flat iron hold fast 400 Each 660 194.35 128271 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden 47 plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). COPER OXIDISED MILD STEEL FITTINGS 9.57S (COPPER OXIDISED AS PER IS: 1378) 9.69 Providing and fixing oxidised M.S. Safety Each 10 88.95 889.5 chain with necessary fixtures for doors, 48 (weighting not less than 450 gms) and (copper oxized as per IS: 1378) 9.72S BRASS FITTINGS Providing and fixing bright finished brass 9.74 tower bolts (barrel type) with necessary screws etc. complete : 49 9.74.1 250x10 mm Each 5 374.35 1871.75 50 9.74.3 150x10 mm Each 5 232.3 1161.5 Providing and fixing special quality bright finished brass cupboard or ward robe 9.79 locks with four levers of approved quality including necessary screws etc. complete. 51 9.79.4 75 mm Each 5 333.15 1665.75 9.82 Providing and fixing bright finished brass Each 80 109.6 8768 52 hanging type floor door stopper with necessary screws, etc. complete. 9.88S CHROMIUM PLATED BRASS FITTINGS Providing and fixing chromium plated 9.92 brass handles with necessary screws etc. complete: 53 9.92.1 125 mm Each 80 226.5 18120 54 9.92.2 100 mm Each 20 199.2 3984 ANODISED ALUMINIUM FITTINGS (ALL 9.95S FITTINGS SHALL BE ISI MARKED) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per 9.96 IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 55 9.96.2 250x16 mm Each 75 234.9 17617.5 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per 9.97 IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 56 9.97.3 200x10 mm Each 80 90.8 7264 57 9.97.4 150x10 mm Each 80 75.55 6044 58 9.97.5 100x10 mm Each 30 58.65 1759.5 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 9.101 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 59 9.101.1 Single rubber stopper Each 5 35.5 177.5 9.105S GYPSUM BOARD PARTITIONS Providing and fixing magnetic catcher of approved quality in cupboard / ward robe 9.114 shutters, including fixing with necessary screws etc. complete. 60 9.114.1 Triple strip vertical type Each 20 44.85 897 ICF HQ-ENGINEERING/ICF 61 9.114.2 Double strip (horizontal type) Each 2 34.15 68.3 Providing and fixing to existing door 9.118 frames. 9.118.3 25 mm thick PVC flush door shutters Sqm 9 2612.2 23509.8 made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (+/- 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (+/- 0.1 mm) is inserted along the hinge side of the door. 62 Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer's specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places 9.119 Providing and fixing factory made P.V.C. Metre 30 408.25 12247.5 door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be 63 reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in- Charge. 9.123 Providing and fixing factory made door Metre 118 481.85 56858.3 frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be 64 mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in- charge. ICF HQ-ENGINEERING/ICF Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and 9.124 the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer- in-charge. 9.124.2 Decorative finish (both side wood grained Sqm 34 3194.4 108609.6 65 finish) 9.129 Providing and fixing cup board shutters 25 Sqm 32 1982.7 63446.4 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side 66 balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer- in-Charge Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and 9.134 average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 9.134.2 30 mm thick shutters With ISI marked stainless steel butt 9.134.2.2 hinges of required size 67 9.134.2.2.1 Second class teak wood Sqm 10 4153.2 41532 ICF HQ-ENGINEERING/ICF Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be 9.147B mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.147B.1 Fixed window / ventilator made of (small Sqm 14 7249.9 101498.6 series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 68 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 9.147D 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. ICF HQ-ENGINEERING/ICF 9.147D.2 Three track three panels sliding window Sqm 7 10030.3 70212.1 with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 69 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.147D.4 Three track three panels sliding window Sqm 28 9642.6 269992.8 with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash

2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Providing and fixing bright /matt finished Stainless Steel handles of approved 9.165 quality & make with necessary screws etc all complete. 71 9.165.1 125 mm Each 10 100.45 1004.5 72 9.165.2 100mm Each 10 75.7 757 73 9.165.3 75 mm Each 10 48.95 489.5 10.0 STEEL WORK Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements 10.6 for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm Sqm 115 3008.8 346012 74 thick top cover 10.7 Providing and fixing ball bearing for Each 45 424.2 19089 75 rolling shutters. 10.28 Providing and fixing stainless steel ( Kg 40 612.25 24490 Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & 76 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.7 Cement concrete pavement with 1:2:4 (1 cum 35 7958.65 278552.75 cement : 2 coarse sand : 4 graded stone 77 aggregate 20 mm nominal size), including finishing complete. 11.26S KOTA STONE FLOORING ICF HQ-ENGINEERING/ICF Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with 11.26 pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 78 11.26.1 25 mm thick Sqm 53 1706.6 90449.8 11.27 Kota stone slabs 20 mm thick in risers of Sqm 15 2038.55 30578.25 steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 79 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 11.28S SAND STONE FLOORING 11.31 Extra for pre finished nosing in treads of Metre 110 157.35 17308.5 80 steps of Kota stone/ sand stone slab. 11.32 Extra for Kota stone/ sand stone in treads Sqm 38 36.35 1381.3 81 of steps and risers using single length up to 1.05 metre. 11.37S CERAMIC GLAZED TILES 11.37 Providing and laying Ceramic glazed floor Sqm 19 935.6 17776.4 tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, 82 Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.40 Providing and laying rectified Glazed Sqm 83 1225.1 101683.3 Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, 83 Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) 11.41A jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish 11.41A.1 of size 84 11.41A.1.1 Size of Tile 600 x 600 mm Sqm 15 1286.6 19299 85 11.41A.1.2 Size of Tile 800 x 800 mm Sqm 880 1372.8 1208064 ICF HQ-ENGINEERING/ICF Glazed vitrified floor tiles polished finish 11.41A.2 of size 86 11.41A.2.1 Size of Tile 600 x 600 mm Sqm 47 1359.2 63882.4 Glazed Vitrified tiles Matt/Antiskid finish of 11.41A.3 size 87 11.41A.3.1 Size of Tile 600 x 600 mm Sqm 370 1311.05 485088.5 12.0 ROOFING 12.1S SHEET ROOFING 12.20 Providing and laying pressed clay tiles (as Sqm 370 620 229400 per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement 88 : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm 12.40 thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 89 12.41.1 75 mm diameter Metre 20 213 4260 90 12.41.2 110 mm diameter Metre 150 319.75 47962.5 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC 12.42 rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.5 Bend 87.5 degrees 91 12.42.5.1 75 mm bend Each 20 91.8 1836 92 12.42.5.2 110 mm bend Each 40 132 5280 12.42.6 Shoe (Plain) 93 12.42.6.2 110 mm Shoe Each 40 115.95 4638 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, 12.43 screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 94 12.43.2 110 mm Each 150 309.5 46425 12.44 Providing and fixing to the inlet mouth of Each 20 47.9 958 rain water pipe cast iron grating 15 cm 95 diameter and weighing not less than 440 grams. 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 96 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 1500 294.85 442275 97 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 4000 282 1128000 13.19S ROUGH CAST PLASTER ICF HQ-ENGINEERING/ICF Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, 13.19 under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 13.19.1 Ordinary cement finish using ordinary Sqm 50 752.4 37620 98 cement 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris Sqm 3700 214.3 792910 putty of 2 mm thickness over plastered 99 surface to prepare the surface even and smooth complete. 18 mm thick plain cement mortar band in 13.29 cement mortar 1:4 (1 cement : 4 fine sand): 13.29.3 cm per 1850 9.55 17667.5 100 Raised Band metre 13.37S INTERIOR FINISHING White washing with lime to give an even 13.37 shade : 101 13.37.1 New work (three or more coats) Sqm 2000 32.45 64900 Distempering with oil bound washable 13.41 distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and Sqm 4100 162.55 666455 102 including water thinnable priming coat with cement primer 13.44S EXTERIOR FINISHING Finishing walls with Premium Acrylic 13.47 Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ Sqm 1600 162.35 259760 1.43 ltr/10 sqm over and including 103 priming coat of exterior primer applied @ 2.20 kg/10 sqm) 13.50 Applying priming coat: 13.50.1 With ready mixed pink or Grey primer of Sqm 25 61.45 1536.25 104 approved brand and manufacture on wood work (hard and soft wood) 13.50.3 With ready mixed red oxide zinc Sqm 370 55.5 20535 chromate primer of approved brand and 105 manufacture on steel galvanised iron/ steel works Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 106 13.61.1 Two or more coats on new work Sqm 395 131.45 51922.75 Varnishing with varnish of approved brand 13.67 and manufacture : 13.67.1 Two or more coats of glue sizing with Sqm 25 197.4 4935 107 copal varnish over an under coat of flatting varnish 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal 15.2 of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 10 2007.1 20071 108 equivalent design mix) ICF HQ-ENGINEERING/ICF 15.58 Demolishing R.C.C. work by mechanical cum 5 2328.55 11642.75 means and stockpiling at designated locations and disposal of dismantled 109 materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. 16.0 ROAD WORK 16.49S MISCELLANEOUS Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed 16.91 o f sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.1 60mm thick cement concrete paver block Sqm 500 932.35 466175 110 of M-35 grade with approved colour, design & pattern. 17.0 SANITARY INSTALLATIONS Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow 17.3 arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid Each 5 6941.3 34706.5 111 plastic seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.4 White Vitreous China Flat back wash basin Each 25 1679.6 41990 112 size 550x 400 mm with single 15 mm C.P. brass pillar tap 17.7.7 White Vitreous China Flat back wash basin Each 5 1318.35 6591.75 113 size 450x 300 mm with single 15mm C.P. brass pillar tap 17.8 Providing and fixing white vitreous china Each 25 1500.05 37501.25 pedestal for wash basin completely 114 recessed at the back for the reception of pipes and fittings. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 17.10 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board ICF HQ-ENGINEERING/ICF 115 17.10.1.2 510x1040 mm bowl depth 225 mm Each 5 6677.4 33387 17.16A Providing and fixing 8 mm dia C.P. / S.S. Each 25 299.35 7483.75 Jet with flexible tube upto 1 metre long 116 with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 17.22A Providing and fixing CP Brass 32mm size Each 30 886.25 26587.5 Bottle Trap of approved quality & make 117 and as per the direction of Engineer-in- charge. 17.22B Providing and fixing CP Brass Single lever Each 20 6119.15 122383 telephonic wall mixer of quality & make as 118 approved by Engineer in charge. (a) 15 mm nominal dia Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 119 17.28.2.2 40 mm dia Each 35 104.35 3652.25 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic 17.32 moulded frame of approved make and shade with 6 mm thick hard board backing : 120 17.32.2 Rectangular shape 453x357 mm Each 5 1158.95 5794.75 17.33 Providing and fixing 600x120x5 mm glass Each 20 942.15 18843 shelf with edges round off, supported on anodised aluminium angle frame with C.P. 121 brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing PTMT towel rail complete with brackets fixed to wooden 17.73 cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length Each 5 600.35 3001.75 of 645 mm, width 78 mm and effective 122 height of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 123 18.8.3 25 mm nominal dia Pipes Metre 175 626.05 109558.75 Providing and fixing G.I. pipes complete 18.12 with G.I. fittings including trenching and refilling etc.-External work 124 18.12.6 50 mm dia nominal bore Metre 100 654.2 65420 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 125 18.17.1 25 mm nominal bore Each 15 532.35 7985.25 ICF HQ-ENGINEERING/ICF 126 18.17.4 50 mm nominal bore Each 10 878.25 8782.5 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 127 18.18.3 25 mm nominal bore Each 10 399.15 3991.5 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : Providing and fixing C.P. brass shower 18.22 rose with 15 or 20 mm inlet : 128 18.22.2 150 mm diameter Each 20 190.1 3802 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, 18.31 rubber insertions etc. (the tail pieces if required will be paid separately) : 18.31.1 100 mm diameter 129 18.31.1.2 Class II Each 5 4500.25 22501.25 Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal 18.35 size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design bricks of class designation 7.5 18.35.1 With common burnt clay F.P.S.(non Each 2 24388.85 48777.7 130 modular) bricks of class designation 7.5 18.48 Providing and placing on terrace (at all Litre 15000 9.7 145500 floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and 131 suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long body bib cock of approved quality conforming 18.51 to IS standards and weighing not less than 690 gms. 132 18.51.1 15 mm nominal bore Each 25 708.4 17710 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 133 18.53.1 15mm nominal bore Each 80 500.35 40028 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.3 15 mm nominal bore, 165 mm long, Each 10 156.65 1566.5 134 weighing not less than 110 gms 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.64 Providing and fixing PTMT swivelling Each 5 106.15 530.75 135 shower, 15 mm nominal bore, weighing not less than 40 gms ICF HQ-ENGINEERING/ICF 18.65 Providing and fixing PTMT soap Dish Each 25 96.75 2418.75 Holder having length of 138mm, breadth 136 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Providing and laying D.I. specials of class 18.68 K-12 suitable for push-on jointing as per IS : 9523 : 137 18.68.1 Up to 600 mm dia Quintal 5 17155.9 85779.5 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron 18.70 Pipes including testing of joints and the cost of rubber gasket : 138 18.70.1 100 mm dia pipes Joint 25 96.15 2403.75 Providing and laying S&S Centrifugally 18.72 Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 139 18.72.1 100 mm dia Ductile Iron Class K-7 pipes Metre 125 1121.1 140137.5 Providing and fixing PTMT extension 18.75 nipple for water tank pipe, fittings of approved quality and colour. 18.75.2 20 mm nominal bore, weighing not less Each 30 76.5 2295 140 than 40 gms 18.78 Making chases up to 7.5x7.5 cm in walls Metre 180 171.8 30924 including making good and finishing with 141 matching surface after housing G.I. pipe etc. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 142 19.1.1 100 mm diameter Metre 500 375.75 187875 143 19.1.2 150 mm diameter Metre 375 591.4 221775 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 19.2 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 144 19.2.1 100 mm diameter S.W. pipe Metre 10 895.5 8955 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water 19.4 tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.1 100x100 mm size P type 19.4.1.1 With common burnt clay F.P.S. (non Each 30 2453.55 73606.5 145 modular) bricks of class designation 7.5 ICF HQ-ENGINEERING/ICF Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 19.9 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 19.9.1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.9.1.1 With common burnt clay F.P.S. (non Each 5 11886.45 59432.25 146 modular) bricks of class designation 7.5 Extra depth for circular type manhole 19.10 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m 19.10.1 With common burnt clay F.P.S. (non Metre 10 6986.8 69868 147 modular) bricks of class designation 7.5 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement 19.30 : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 mix(1Cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 19.30.2 cm deep for pipe line with one or two inlets : 19.30.2.1 With common burnt clay F.P.S. (non Each 25 7308.15 182703.75 148 modular) bricks of class designation 7.5 Total 32115111.13

Item Breakup - B-Supply of steel

Item Breakup - C-Items not covered under DSR 2021

Supplying and laying of UPVC pipes, 10 Metre kgf/sq.cm. working pressure conforming to IS 4985 including specials as required, wall clips and jointing with contractors jointing materials, etc. (above Ground Level) Supplying and laying of UPVC pipes, 10 kgf/sq.cm. working pressure conforming to IS 4985 of FINOLEX, PRINCE or similar make with necessary specials like PVC Elbow, Coupling etc., as required at site, wall clips and jointing with contractors jointing materials, etc. (above Ground Level). The rate quoted shall be inclusive of Contractors material, labour, transportation, lead, lift, tools and plant, taxes etc complete." (a) 32mm dia

Supplying and laying of UPVC pipes, 10 Metre kgf/sq.cm. working pressure conforming to IS 4985 including specials as required, wall clips and jointing with contractors jointing materials, etc. (above Ground Level) Supplying and laying of UPVC pipes, 10 kgf/sq.cm. working pressure conforming to IS 4985 of FINOLEX, PRINCE or similar make with necessary specials like PVC Elbow, Coupling etc., as required at site, wall clips and jointing with contractors jointing materials, etc. (above Ground Level). The rate quoted shall be inclusive of Contractors material, labour, transportation, lead, lift, tools and plant, taxes etc complete." (b)50mm dia

Finishing the top of Terrace floor with one Sqm course of solor reflective water proof, heat proof cool roof tiles of size 305mmx305mmx 7mm thick of approved quality laid in cement mortar 1:3 mixed with calcium based mineral powder (60kg for 1000 sq.ft. (before laying tiles, the tiles should be dipped with salin based nano liquid) and top grouting with cement mortar 1:3 mixed with white cement, silicon powder and polymer additives (20 kg for 1000 sq.ft.) and joint pointed with Zycosil oil (200gm for 1000 sq.ft.) after grouting acrylic salin based liquid with out base concrete etc., complete complying with standared specifications including cost of all materials, labour charges for lifting to open terrace, laying and finishing, taxes and other incidental charges etc., complete and as directed by Engineer in charge. The rate quoted shall be inclusive of all material, labour, transportation, lead, lift, tools and plant, taxes etc complete ICF HQ-ENGINEERING/ICF

Supply and fixing of chicken mesh for Sqm valance. The rate quoted shall be inclusive of all material, labour, transportation, lead, lift, tools and plant, taxes etc complete.

Supply and fixing of 18mm 20mm thick Sqm double side polished cudappa slab for Cubboard/Shelves. The rate quoted shall be inclusive of all material, labour, transportation, lead, lift, tools and plant, taxes etc complete.

Supply and fixing of Hindware nevio 90 Set Chimney Stainless Steel 90 cm Auto Clean Hood Chimney or equivalent of size not less than 900mm x 500 mm x 515mm. The chimney should have a minimum suction capacity of 1200 m3/hr. The product shall have a minimum omprehensive warranty of one year and 5 years warranty on motor. The product should be procured in the name of Engineer-Incharge of ICF, The chimney should have soft touch control, baffle filter, oil collector, powerful filter, baffle filter etc., if any. The rate is inclusive of all materials, taxes, lead, lift, labour, fixing arrangements, finishing the walls etc., complete.

Manufacturing, supplying SS fly proof Sqm mesh double leaf door shutter with all fittings and fastenings and fixing in position to the existing wooden framed doors, the frames made up of powder coated aluminium sleek section with stainless steel mesh with 90' corners, removable, washable mesh fitted with rubber spline, stoppers, centre clip and with necessary fixing accessories with the following specification. The rate is inclusive of all material, labour, taxes, lead, lift etc., complete and as directed by the Engineer-in-charge. Frame: Outer frame made of powder coated aluminium section-model no X412 or simillar of size 45x14x2mm of approximate weight 1.80kg/12' length and middle frame made up of powder coated aluminimum section- model no. X412 or simillar of size 40x13x2mm of approximate weight 1.52kg/12' length. Mesh: Stainless steel mesh SS 304-16x3 grade-16x16 aperture size per sq inch. Hinges: 3 nos per shutter made up of polypropylene co polymer of total length 67.3mm and length of each piece 33mm and of width 12.8 & 15.95mm. Comer piece: 4 nos per shutter made up of powder coated nylon material 90' of size 78x10.9x3.1mm. Magnetic lock: size 47.3x17.4x1.5mm flat made of powder coated aluminium 25mm wide. Handle: Made up of powder coated aluminium of length 108 and width 13.65mm. Rubber spline: Made up of EDPM rubber of dia 6.3mm. NOTE: Payment to be made based on the area of outer frame measured to nearest centimetre.the rate quoted is inclusive of all contractors materials, labour, lead, lift,consumables, transport and taxes etc complete ICF HQ-ENGINEERING/ICF

Supply 600mmx450mmx5mm thick mirror with synthetic frame The rate is inclusive of all material, labour, taxes, lead, lift etc., complete and as directed by the Engineer-in-charge.

Supply and fixing of Modular kitchen Sqm made up of 20mm BWR (Boil water proof) plywood laminated and matt finished on both sides. The models of the modular kitchen shall be submitted to ICF and to be got approved from the Engineer-in- charge. The rate is inclusive of pull out shelves like Stainless steel plain basket, stainless steel bottle basket, stainless steel thall basket, SS grain trolley basket, SS Bottle pullout wherever required. The rate is also inclusive of corner storages like Stainless Steel Scarousel, SS Ideal magic comer, SS half carousel, SS carousel ¼ round & SS magic carousel wherever required. The rate is Inclusive of hanging storage shelves like SS hanging double shelf, hanging double spice rack, hanging cutlery holder, SS hanging paper and foll holder with cutter, SS hanging single spice rack, SS hanging single shelf, SS hanging hook, SS hanging ultra prime wherever required. The rate is inclusive of over/under storage shelves like SS under sink basket, SS kitchen keeper, SS detergent holder, SS storage rack, SS ladle cradle, SS dish rack, SS glass tray,SS plate tray, SS cylinder trolley, SS drip tray, SS plate rack, SS triple shelf corner, SS single shelf corner, SS double shelf corner, SS perforated bin & SS bin holder wherever required. The rate is also inclusive of high and deep storage shelves like double tall unit ,rotating unit wherever required. provision of glass panels wherever required in the modular kitchen. The rate is inclusive of Stainless steel/chromium plated handles, stainless steel Thinges, stainless steel locks, magnetic stoppers, sliding wheels for the all the accessories wherever required as per the model approved. The minimum width of the wardrobe shall be as per the approved drawing. The colour shall be as specified by the Engineer-in-charge. This rate is inclusive of all materials, labour, lead, lift, tools and plants, taxes etc complete. Note: Only length and height will be calculated for payment.the rate quoted is inclusive of all contractors materials, labour, lead, lift,consumables, transport and taxes etc complete ICF HQ-ENGINEERING/ICF

Supply and fixing of modular wardrobe & Sqm TV Cabinet made up of 20mm plywood laminated and matt finished on both sides. The models of the wardrobe & TV cabinet shall be submitted to ICF and to be got approved from the Engineer-in- charge. The rate is inclusive of provision of glass panels wherever required in the wardrobe/tv cabinet. The rate is inclusive of Stainless steel/chromium plated handles, stainless steel hinges, stainless steel locks, cabinet wheels & magnetic stoppers wherever required as per the model approved. The minimum width of the wardrobe shall be 525mm. The colour shall be as specified by the Engineer-in- charge. This rate is inclusive of all materials, labour, lead, lift, tools and plants, taxes etc., Note: Only length and height will be calculated for payment.

Lime concrete terracing on roofs, average cum thickness 10cm laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty: 2 surkhi) rammed and finished with gur and belgiri treatment complete and covered with FPS flat brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement, over 12mm layer of cement mortar 1:3 (1 cement: 3 fine sand) and finished neat upto floor two level.the rate quoted is inclusive of all contractors materials, labour, lead, lift, consumables, transport and taxes etc complete

Providing and fixing magic eye piece Each 25mm size in all type of door shutters.the rate quoted is inclusive of all contractors materials, labour, lead, lift,consumables, transport and taxes etc complete

Providing and fixing Nickel chromium Each plated brass sliding doors bolts and screws etc. complete: 250mmx16mm.the rate quoted is inclusive of all contractors materials, labour, lead, lift,consumables, transport and taxes etc complete

Providing and fixing 110mm dia PVC soil, Metre waste and vent pipes including jointing and cost of spun yarn and sand etc. complete. the rate quoted is inclusive of all contractors materials, labour, lead, lift, consumables, transport and taxes etc complete

Providing and fixing 110mm PVC bend of Each the required degree with access door inclusive of 3mm thick bitumastic felt washer, bolts and nuts, complete, including jointing and cost of spun yarn and sand etc. complete. The rate quoted is inclusive of all contractors materials, labour, lead, lift,consumables, transport and taxes etc complete ICF HQ-ENGINEERING/ICF

Providing and fixing 10cm inlet and 5cm Each outlet S.C.I. floor trap of self cleansing design with S.C.I. screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. The rate quoted is inclusive of all contractors materials, labour, lead, lift, consumables, transport and taxes etc complete

Providing and fixing Towel rail (C.P.) brass Each 15mm dia. x 600mm long having approx. weight 500 gm. The rate quoted is inclusive of all contractors materials, labour, lead, lift, consumables, transport and taxes etc complete

Providing and fixing C.P. brass Shower Each arm 15mm size with 15mm (1/2") B.S.P. threads, 195mm long with a bend of 45 (effective length of 210 mm) provided with a flange of 56mm dia and having approx. weight of 40 gm. The rate quoted is inclusive of all contractors materials, labour, lead, lift, consumables, transport and taxes etc complete

Supply and fixing Jaquar wall hung water Set closet with necessary health faucet, angular stop cock, control panel, slim consealed cistern etc. the rate inclusive of necessary labour, lift, taxes, tools and plants, fixing arrangements etc. complete.

Providing and fixing C.P. Brass Towel ring Each in trapezoidal shape having length of SET 215mm, width 200mm, minimum distance from wall 37mm with consealed fittings arrangements weighing approx 90gms. The rate quoted is inclusive of all contractors materials, labour, lead, lift, consumables, transport and taxes etc complete Total 7116728.00

Item Breakup - D-Items not covered under SRUSSOR 2011

Supply & erection of LT Modular type 3 Set phase energy meter Distribution Panel - consisting of R, Y, B indication, along with connector, 10-60 amps, Three Phase Energy Meter with communication port facility - 1 No. & three phase 63A 4p MCB. Necessary termination with suitable copper wires etc., as per ICF Specification.

Supply & erection of LT Modular type 3 Set phase DB Panel consisting of 1.63A, MCB 4 Pole as Incomer- 1No. 2. 63A (100mA sensitivity) RCCB 1No. 3.63A, 3 Phase selector switch - 3 Nos. 4.40A Double pole MCB 3 Nos. 5.40A ( 30mA sensitivity) RCCB - 3Nos. 6.30 Nos. of 10A/16A/20A SP MCB's for R, Y, B & N and necessary termination with suitable copper wires etc., as per ICF Specification.

Supply and fixing of 4 way SPN DB with 1 Numbers no of 20A DP MCB & 20A DP RCCB with all accessories as per ICF specification. ICF HQ-ENGINEERING/ICF

Supply, erection & commissioning of 12 Numbers way SPN MCB DB with 1 No. of 40A Double pole MCB as incomer, 30mA, 40A, RCCB 1No and 8 nos. of 10A/16A, single pole MCB as per ICF Specification.

Supply & erection of M.S. terminal Box (as Numbers per drawing ICF/EL-1285) as per ICF Specification.

Supply & Running of 3 Runs of 1.5 sq.mm Each PVC FRLS copper cable (Red, Black, Span Green) in 1" PVC conduit/ Casing capping and accessories duly Fixing the conduit in the wall using Hard wares. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., (One span Shall consist of one meter length of 3 runs of single core 1.5 Sq.mm FRLS copper cable, PVC pipe., PVC accessories and hardware etc.,)"

Supply & Running of 2 Runs of 2.5 Sq.mm Each and 1 Run of 1.5 sq.mm PVC FRLS copper Span cable (Red, Black, Green) in 1" PVC conduit/ Casing capping and accessories duly Fixing the conduit in the wall using Hard wares. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc. (One span Shall consist of one meter length of 2 runs of single core 2.5 Sq.mm & 1 run of single core 1.5 Sq.mm FRLS copper cable, PVC pipe., PVC accessories and hardware etc.,)

Supply & Running of 2 Runs of 4.0 Sq.mm Each and 1 Run of 1.5 sq.mm PVC FRLS copper Span cable (Red, Black, Green) in 1" PVC conduit/ Casing capping and accessories duly Fixing the conduit in the wall using Hard wares. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc. (One span Shall consist of one meter length of 2 runs of single core 4 Sq.mm & 1 run of single core 1.5 Sq.mm FRLS copper cable, PVC pipe., PVC accessories and hardware etc.,)

Supply & Running of 2 Runs of 6.0 Sq.mm Each and 1 Run of 2.5 sq.mm PVC FRLS copper Span cable (Red, Black, Green) in 1" PVC conduit/ Casing capping and accessories duly Fixing the conduit in the wall using Hard wares. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc. (One span Shall consist of one meter length of 2 runs of single core 6.0 Sq.mm & 1 run of single core 2.5 Sq.mm FRLS copper cable, PVC pipe., PVC accessories and hardware etc.,) ICF HQ-ENGINEERING/ICF

Supply and Running Of 4 nos. of 10 Each sq.mm PVC FRLS copper cable (Red, Span Yellow, Blue & Black) and 1 no. of 4 sq.mm (Green) in 40mm dia PVC conduit/Casing Capping and accessories duly fixing the conduit in wall using hard wares. Contractor scope of supply includes PVC conduit/Casing Capping, PVC cable, PVC accessories, hardwares etc. as per specification (One span shall consist of one meter length of 4 runs of single core 10 sq.mm & 1 run of single core 4 sq.mm FRLS copper cable, PVC pipe., PVC accessories and Hardwares etc.)

Supply & Erection of 20A switch type MCB Numbers suitably fixed in 2 module modular box as per specification

Supply of 6A Modular switch in the Numbers 485.00 existing modular switch box as per specification

Supply of 6A Modular Socket in the Numbers 270.00 existing modular switch box as per specification

Supply of 16A Modular Switch in the Numbers 190.00 existing modular switch box as per specification

Supply of 16A Modular Socket in the Numbers 190.00 existing modular switch box as per specification

Supply, fixing & connection of Calling Bell Numbers switch in the existing modular switch box as per specification

Supply & fixing of calling bell with image Numbers display system as per specification

Supply & Fixing of Modular Type calling Numbers bell as per specification.

Supply & Fixing of 12 Module GI Box with Numbers front plate for Modular Switch Box and all other required sub-assemblies including fixing of switches/Sockets etc and internal wiring as per specification.

Supply & Fixing of 9 Module GI Box with Numbers front plate for Modular Switch Box and all other required sub-assemblies including fixing of switches/Sockets etc and internal wiring as per specification

Supply & Fixing of 6 Module GI Box with Numbers front plate for Modular Switch Box and all other required sub-assemblies including fixing of switches/Sockets etc and internal wiring as per specification.

Supply & Fixing of 4 Module GI Box with Numbers front plate for Modular Switch Box and all other required sub-assemblies including fixing of switches/Sockets etc and internal wiring as per specification.

Supply & Fixing of 3 Module GI Box with Numbers front plate for Modular Switch Box and all other required sub-assemblies including fixing of switches/Sockets etc and internal wiring as per specification.

Supply & Fixing of 2 Module GI Box with Numbers 100.00 front plate for Modular Switch Box and all other required sub-assemblies including fixing of switches/Sockets etc and internal wiring as per specification. ICF HQ-ENGINEERING/ICF

Supply and fixing of 2M Metal Box, Numbers Surface Plate with Telephone Socket (RJ- 11)-1 No & Cable TV socket-1 No as per specification

Supply of 18W (4ft) LED Tube light Numbers Luminaire & Batten as per specification.

Fixing of 18W LED Tube light Luminaire & Numbers Batten as per specification.

Supply & Fixing of 9/11 LED Mirror light Numbers Fitting as per specification.

Supply, Testing & Fixing of 12W LED Bulb Numbers as per specification.

Supply & Fixing of LED Wall decorative Numbers light Fitting as per specification.

Supply, Fixing, connecting, Testing & Numbers commissioning of 1200 mm (48") Sweep BLDC Ceiling Fan with all accessories as per ICF Specification.

Supply, Fixing, connecting, Testing & Numbers commissioning of 1200 mm (48") Sweep BLDC DECORATIVE Ceiling Fan with all accessories as per ICF Specification.

Supply, erection & Testing of (12") Heavy Numbers duty BLDC Exhaust Fan as per ICF Specification.

Supply & erection of 25 Ltrs. Geyser as Numbers per ICF Specification.

Wiring of Staircase point with modular Point switch box including materials and labor as per specification.

Supply & Erection of Ceiling Rose/ Holder Numbers 450.00 with proper termination as per specification.

Supply & fixing of 25W LED street light Numbers fittings, accessories and hardware etc. as per specification.

Supply and fixing of 10W, LED Bulk type Numbers fitting as per ICF specificaiton

Supply & laying of 4 core, 10 sq.mm Metre armored copper cable as per specification

Supply & erection of end termination of Metre copper cable 10/16 sq mm with all required items like proper glands and crimping sockets, hardwre, crimping paste etc., as per ICF specification

Supply, commissioning of Earthing Electrode to Drg No. ICF/EL/1289 inclusive of supply of all reqd. materials like 50 mm dia pipe, copper strip of size 25X3 mm, all reqd. hardware and all other materials etc., as per Specification.

Supply and laying of 8 SWG copper wire Kg as per ICF specification

Chasing of wall to conceal 1"/0.75"/0.5 Metre inch PVC/MS conduits and plastering with cement mortar, painting etc., to match with adjacent surfaces as per specification.

Chasing of wall to conceal switch Metre boxes/MCB DB's upto 300 x 300 mm size and plastering with cement mortar, painting etc., to match with adjacent surfaces as per specification ICF HQ-ENGINEERING/ICF

Chasing of wall to conceal switch Metre boxes/MCB DB's above 300 x 300 mm size and plastering with cement mortar, painting etc., to match with adjacent surfaces as per specification

Supply of 50 pair Polythene insulated, Metre Polythene sheathed, jelly filled armored UG telephone cable confirming to spec No. TEC GR No. GR/CUG-01/03. Aug 2003 or latest. The cable shall be of minimum 500 mtrs of continuous length of and wound on a wooden drum confirming to specification No. TEC Gr.No. G/CBD-01/02 Nov 94 as per specification

Supply of 20 pair Polythene insulated, Metre Polythene sheathed, jelly filled armored UG telephone cable confirming to spec No. TEC GR No. GR/CUG-01/03. Aug 2003 or latest. The cable shall be of minimum 500 mtrs of continuous length of and wound on a wooden drum confirming to specification No. TEC Gr.No. G/CBD-01/02 Nov 94 as per specification

Laying of 20/50 pair armored UG Metre Telephone cable in trench duly Excavation of earth for trench, laying of telephone cable & refilling of earth as per specification

Supply & laying of 5 pair PVC switch Metre board cable with 0.5mm dia copper conductor conforming to latest TEC Spec. G/WIR-06/02 of May 1994 or latest

Supply & installation of Dual I/O Face Numbers plate with IO Jack CAT6 as per specification

Supply & Mounting of KRONE make 50 Numbers pair outdoor connection box with 10 pair LSA Disconnection modules, back mounting frame, Label holder (complete set) as per specification.

Supply of 12F OFC cable semi armored Metre with Ind Tube as per specification

Supply of 6F OFC cable semi armored with Metre Ind Tube as per specification

Laying OFC with specification.

OFC splicing Specification

Supply, fixing, connection & testing of 12 Numbers Port Rock Mounted Fibre Patch Panel (Liu) as per specification

Supply of CAT 6 flexi UTP Cable as per Metre specification

Supply & installation of 1" Rigid PVC Metre Conduit with all accessories duly inserting the telephone & Cat 6 cable

supply & fixing of 6 way splitter as per Numbers specification

Supply RG-06 CO AXIAL COPPER CABLE Numbers for DTH as per specification

Laying and Termination of RG-6 full Metre copper cable with supply & fixing of 25mm dia PVC pipes and accessories as per Specification Total 5194458.00 Item- 2 Electrical works-External Power supply arrangements ICF HQ-ENGINEERING/ICF S No. Item No Description of Item Unit Qty Rate Amount

Design, Fabrication, supply & Erection of Numbers Floor Mounting Cubicle Type 7 Way MDB Board made out of 14/16 SWG CRCA Sheet Steel enclosure consisting of copper busbar cable chamber, Earthing and Powder coated Painting with the following incoming and outgoing as below:-Incoming: 400 Amps HRC Fuse &Fuse base holder - 02 Nos. Outgoing: 100 Amps HRC Fuse &Fuse base holder 05 Nos. as per specification.

Supply of 35 Sq.mm, 4 core, XLPE LT, AL, Metre Armoured, UG Cable as per specification

Supply of 300 Sq.mm. 3½ core, XLPE LT, Metre AL, Armored, UG Cable as per specification

Laying of LT cable upto 300 Sq.mm. Duly Metre Excavating and refilling the trench with excavated earth as per specification.

Trenchless duct type boring with laying of Metre 300 sq mm LT XLPE cable end to end in meters at depth of 1.5 meters to 2 meters as per ICF specification

Supply & laying of 40mm dia HDPE pipe Metre as per specification

Supply & End termination of UG AI cable Set 3.5/4 Core, 240/300 Sq.mm. with all required items like proper glands and crimping sockets, hardware, crimping paste, etc., as per ICF Specification.

Supply & End termination of UG AI cable Set 3.5/4 Core, Upto 50 Sq.mm. with all required items like proper glands and crimping sockets, hardware, crimping paste, etc., as per ICF Specification.

Supply & erection of street light control Numbers box with digital timer, as per specification

Supply of 6 Mtr high octagonal Poles, Pole Numbers shall be one section, hot dip galvanized, with suitable base plant and inbuilt terminal box with cover & single arm bracket as per Specification.

Erection of street post including supply of Numbers M 20X600 mm foundation bolts for octagonal pole and all masonry materials as per Specification.

Supply of 45W LED Street light fitting with Numbers IP 66 protection along with lens as per Specification.

Fixing, Testing & commissioning of 45W Numbers LED Street light Fitting including supply of necessary fixing brackets and hardwres etc., as per specification.

Supply & erection of Sintex box for Numbers Octagonal post with 2Nos of 40mm. PVC Pipe/ Tube for 4 core 16 Sq.mm. cable entry as per specification.

Supply, commissioning of 20mm solid hot dip GI earthing spike rod as per ICF specification

Breaking & redoing of concrete portion cum using contractors own materials as per ICF specification Total 2001974.00