Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.3 L
EMD Value
₹8,667
Closing Date
15 Oct 2026, 3:30 pm5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer
IWD IIT Kanpur
SITC of 2000 CFM AHU with associated works in room no. 311 ESB II building IIT Kanpur
2026_IITK_929090_1
20/AC/SE/2026/222
Open Tender
Electrical Works
Percentage
60 days
IIT Kanpur
As per tender
2 documents required · 2 mandatory
₹0
₹8,667
6 Oct 2026
6 Oct 2026
16 Oct 2026
6 Oct 2026
15 Oct 2026
6 Oct 2026
6 Oct 2026 - 13 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, Installation, Testing and Commissioning of AHRI certified, double skin sheet metal construction, thermal break profile, with direct coupled EC fan and Ceiling suspended air handling units without mixing box, with supply air damper air (AL) damper, with injected PUF of density not less than 40Kg/CuM and .The air handling units shall be complete with 50mm thick synthetic type pre- filters with Aluminium wire mess, cooling coil (minimum thickness 0.5mm ) section with 6/8 RD seamless solid drawn copper tubes and aluminium fins construction, fan section shall be AMCA certified centrifugal type plug fan complete with direct driven package, limits switch, marine light & stainless steel drain pan ( minimum thickness 1.25 mm and 13 mm close nitrile insulation ) and vibration isolation spring/cushy-foot mount. AHUs shall be selected for a maximum face velocity of 500 FPM (2.5 MPS). Maximum outlet air velocity shall not exceed 2000 FPM (10.1 MPS). With speed controller of EC Fan as per specifications, with 2-way motorised valve and thermostat for temperature and speed control. | |||||
| 1.1 | 2000 CFM, Ceiling suspended, min. 35 mmwc static, with 50 mm thick PUF injected. Min 6TR cooling capacity. Ceiling suspended | 1 | Nos. | 2,25,058 | ₹2,25,058 |
| 2CHILLED WATER PIPING | |||||
| 2.1 | Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled/condenser water piping plumbing i/c fabrication of bends / elbows, tees, reducers etc) inside the building (with necessary clamps, wooden/puf support, vibration isolators, primer/ enamel paint, fittings but excluding valves, strainers, gauges etc.) as per specifications and as required complete in all respect.
Note:- The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. | - | - | - | - |
| 2.2 | 25 mm | 2 | Mtr | 830 | ₹1,660 |
| 2.3 | 32 mm | 5 | Mtr | 946 | ₹4,730 |
| 2.4 | 40 mm | 40 | Mtr | 1,147 | ₹45,880 |
| 2.5 | 50 mm | 10 | Mtr | 1,403 | ₹14,030 |
| 3Supplying & fixing insulation on existing MS 'C' class pipe over exposed surface/underground of following sizes with 50 mm thick fire retardant thermocole ( polystyrene) molded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessian cloth, wire mesh, sand-cement plaster & enamel painting two or more coat to give even shade after applying one coat of ordinary paint etc complete as required. | |||||
| 3.1 | 25 mm | 2 | Mtr | 335 | ₹670 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Tendernotice_2.pdf
PDF • 0.86 MB
BOQ_976346.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .