SPECIAL REPAIR and DEVELOPMENT WORK OF PRIMARY HEALTH CENTRE BUILDING ,AT-GADMUDSHINGI TAL- KARVEER DIST-KOLHAPUR (ZILLHA VARSHIK YOJANA YEAR 2025-26)

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts excetra complete. Item / Page No : 9 / 215 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts excetra complete. Item / Page No : 15 / 215 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts excetra complete. Item / Page No : 19 / 215 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. Item / Page No : 5 / 144 Specification No : Bd.G.5 Spec. Page No : 315 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. Item / Page No : 11 / 153 Specification No : Bd.L.7 Spec. Page No : 369 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. - Flooring Item / Page No : 40 / 159 Specification No : Bd.M.12 Spec. Page No : 385 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying vitrified mirror / glossy finish tiles having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. - Skirting Item / Page No : 41 / 159 Specification No : Bd.M.12 Spec. Page No : 385 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing in position (as per Indian Standard : 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre X 38.10 milimetre X 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre X 31.75 milimetre X 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts, excetra complete. - With colour anodising with box. Item / Page No : 37 / 183 Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.

Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer confirming to Indian Standard : 6524-1983 having 6 milimetre diameter bars three numbers and stirrups at 250 milimetre center to center and fixing in wall with six numbers of holdfast of 12 milimetre diameter bars 500 milimetre long including primer and oil painting, excetra complete. - Frame size 60 milimetre X 125 milimetre. Item / Page No : 57 / 187 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing solid core flush door shutter in double leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides and finishing with French Polish, excetra complete Item / Page No : 95 / 191 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Providing and fixing in position, double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 milimetre X 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre X 44.5 milimetre, 3 milimetre thick top rails 47.62 milimetre X 44.45 milimetre, 3 milimetre thick, vertical style 47.62 milimetre X 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, Indian Standard Institution mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, poly vinyl chloride gaskets, 250 milimetre length tower aluminium bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipments, excetra complete. Item / Page No : 63 / 188 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing in position, single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre X 2.40 metre with aluminium door frame of powder coated section 101.60 milimetre X 44.75 milimetre, 3.18 milimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 milimetre X 44.5 milimetre, 3 milimetre thick top rails 47.62 milimetre X 44.45 milimetre, 3 milimetre thick, vertical style 47.62 milimetre X 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels excetra, Indian Standard Institution mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, poly vinyl chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, excetra as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipments, excetra complete. Item / Page No : 64 / 188 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface (excluding primer coat), excetra complete. Item / Page No : 13 0 / 167 Specification No : Bd.P.6 Spec. Page No : 414

Providing and applying plastic emulsiton paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface (excluding the primer coat), excetra complete. Item / Page No : 12 ` / 167 Specification No : Bd.P.6 Spec. Page No : 414

Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed, excetra) Item / Page No : 1 / 131 Specification No : Bd.E.1 Spec. Page No : 287 - 288 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed, excetra complete. (By Manual Means) Item / Page No : 2 / 64 Specification No : BR.3 Spec. Page No : 102

Excavation for foundation in hard murum including shoring and strutting as necessary and disposing off excavated stuff as directed, excetra complete. Item / Page No : 4 / 64 Specification No : BR.3 Spec. Page No : 102

Providing and laying in situ cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing excetra complete. (with reversible drum type mixer) with Supervisory Control and Data Aquisition with crushed sand. Item / Page No : 3 / 62 Specification No : CD.3 Spec. Page No : 160 Additional Specifications : With addtional specifications for controlled concrete.

Providing and laying in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Item / Page No : 11 / 133 Specification No : Bd.F.3, B-7 Spec. Page No : 298, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying cast in situ / Ready Mix cement conrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete.with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Item / Page No : 31 / 134 Specification No : Bd.F.5, B-7 Spec. Page No : 300, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Item / Page No : 50 / 135 Specification No : Bd.F.6, B-7 Spec. Page No : 300 - 301, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and cutting, bending, hooking, tieing and laying in position thermo mechnically treated FE-500 steel bars for reinforcement for reinforcement for all reinforced cement concrete works as per detailed drawings, excetra complete. Item / Page No : 1 / 71 Specification No : BR-35 Spec. Page No : 134

Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. Item / Page No : 11 / 153 Specification No : Bd.L.7 Spec. Page No : 369 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface (excluding primer coat), excetra complete. Item / Page No : 13 0 / 167 Specification No : Bd.P.6 Spec. Page No : 414

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade, excetra complete. Weight 18 to 20 kilogram per Square metre. Item / Page No : 9 / 129 Specification No : Bd.W.6 Spec. Page No : 585 - 586

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand / grit, ramming, watering, excetra complete. Item / Page No : 40 / 118 Additional Specifications : The work shall be carried out as per instructions of Engineer in-charge.

Providing and fixing heavy duty inter locking concrete coloured paving blocks of 80 milimetre thickness of having a strength of 300 kilogramme per square centimetre of approved quality and shape on a bed of crushed sand of 25 milimetre to 30 milimetre thick including striking joints and cleaning, excetra complete. Item / Page No : 52 / 160 Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.

Providing and laying in situ/Ready Mix cement concrete M-15 of trap metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I. quality Artificial Sand Item / Page No : 11A / 133 Specification No : Bd.F.3, B-7 Spec. Page No : 298, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (Lift upto 1.5 metre) By Mechanical Means Item / Page No : 2 / 115 Specification No : Bd.A.1 Spec. Page No : 259

Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. (Lift upto 1.5 metre) By Mechanical Means Item / Page No : 6 / 115 Specification No : Bd.A.2 Spec. Page No : 259

Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed, excetra) Item / Page No : 1 / 131 Specification No : Bd.E.1 Spec. Page No : 287 - 288 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Item / Page No : 11 / 133 Specification No : Bd.F.3, B-7 Spec. Page No : 298, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing second class burnt brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water manually, striking joints, on unexposed faces, racking out joints on exposed faces and watering, excetra complete. Item / Page No : 1 / 144 Specification No : Bd.G.1 Spec. Page No : 313 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compacting, excetra complete. Item / Page No : 36 / 117 Specification No : Bd.A.10 Spec. Page No : 262 - 263

Filling in plinth and floors with contractors material / brought from outside and approved by Engineer In-Charge, in 15 centimetre to 20 centimetre layers including watering and compaction, excetra complete. Item / Page No : 37 / 117 Specification No : Bd.A.11 Spec. Page No : 263 - 264

Providing and laying cast in situ / Ready Mix cement conrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete.with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Item / Page No : 31 / 134 Specification No : Bd.F.5, B-7 Spec. Page No : 300, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Item / Page No : 50 / 135 Specification No : Bd.F.6, B-7 Spec. Page No : 300 - 301, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,laying / pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Item / Page No : 70 / 135 Specification No : Bd.F.8, B-7 Spec. Page No : 302 - 303, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, compacting, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate of natural sand/V.S.I. quality Artificial Sand Item / Page No : 5 / 137 Specification No : BDF-9, B-7 Spec. Page No : 303 - 304, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing in position thermo mechnically treated FE-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. Item / Page No : 33 / 139 Specification No : Bd.F.17 Spec. Page No : 306

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. Item / Page No : 5 / 144 Specification No : Bd.G.5 Spec. Page No : 315 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer confirming to Indian Standard : 6524-1983 having 6 milimetre diameter bars three numbers and stirrups at 250 milimetre center to center and fixing in wall with six numbers of holdfast of 12 milimetre diameter bars 500 milimetre long including primer and oil painting, excetra complete. - Frame size 60 milimetre X 125 milimetre. Item / Page No : 57 / 187 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. Item / Page No : 2 / 192 Specification No : Bd.U.1 Spec. Page No : 537

Providing internal cement plaster 12 milimetre thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, excetra complete. Item / Page No : 4 / 153 Specification No : Bd.L.2 Spec. Page No : 368 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. Item / Page No : 11 / 153 Specification No : Bd.L.7 Spec. Page No : 369 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing 90 centimetre X 60 centimetre granite name plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. Item / Page No : 12 / 213 Specification No : Bd.W.7 Spec. Page No : 586 - 587

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts excetra complete. Item / Page No : 19 / 215 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Removing water closet pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side excetra complete.carefully and throwing out the refusal outside excetra complete. Item / Page No : 41 / 217 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts excetra complete. Item / Page No : 15 / 215 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Providing and laying vitrified rustic matt stone finish tiles having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. - Flooring Item / Page No : 44 / 159 Specification No : Bd.M.12 Spec. Page No : 385 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing first class white glazed earthenware Orissa type water closet pan 580 milimetre diameter including "P" or "S" trap, cast iron soil and vent pipe upto the outside face of the wall, 1:5:10 cement concrete bedding 15 milimetre thick, 10 litre poly vinyl chloride flushing cistern with all necessary pipe connection, excetra complete. Item / Page No : 33 / 202 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection, excetra complete. Item / Page No : 34 / 202 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing hume pipe septic tank 900 milimetre diameter with vent pipe and cap including excavation and laying. Item / Page No : 18 / 201 Specification No : Bd.V.45 Spec. Page No : 575

Providing soak pit of size 120 centimetre X 120 centimetre X 120 centimetre including excavating and filling with brick bats. Item / Page No : 19 / 201 Specification No : Bd.V.46 Spec. Page No : 576

Providing and fixing 15 milimetre diameter poly vinyl chloride Aqua kraft type of approved make super pillar tap with flange including all accessories, excetra complete. Item / Page No : 41 / 212 Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.

Provoding and fixing high density polyethylen container of approved make one piece moulded water tank made out of high density polyethylen and built corrugated inclusive of delivery upto destination housing, fixing of accessaries such as inlet, outlet, overflow pipe inclusive of all Taxes - Capacity between 1000 litres to 20000 litres. Item / Page No : 54 / 204 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and laying in situ / ready mix / ready mix M-10 cement concrete of trap / granite / quartzite / gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing excetra complete. (with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artificial sand) Item / Page No : 25 / 65 Specification No : BR.5, B-7 Spec. Page No : 105 - 107, 38-40 Additional Specifications : 1. With additional specification for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 milimetre diameter polyvinyl chloride flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall, excetracomplete as directed by Engineer in charge. Item / Page No : 31 / 227 Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge.

Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer confirming to Indian Standard : 6524-1983 having 6 milimetre diameter bars three numbers and stirrups at 250 milimetre center to center and fixing in wall with six numbers of holdfast of 12 milimetre diameter bars 500 milimetre long including primer and oil painting, excetra complete. - Frame size 60 milimetre X 125 milimetre. Item / Page No : 57 / 187 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing 37 milimetre thick factory made polyvinyl chloride Door shutter, styles and rails made of polyvinyl chloride hollow extruded printed and laminated section having overall dimension 115 milimetre X 37 milimetre with wall thickness 2 milimetre (± 0.2 milimetre) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 numbers polyvinyl chloride profile reinforcement of size 75 milimetre X 200 milimetre long with cross section size of 29 milimetre X 31 milimetre having wall thickness 2 milimetre (± 0.2 milimetre). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with polyvinyl chloride profile reinforcement in full length. Printed and laminated polyvinyl chloride lock rail of size 110 milimetre X 37 milimetre having wall thickness 2 milimetre (± 0.2 milimetre) to be welded horizontally with the vertical styles after inserting polyvinyl chloride profile reinforcement as in styles and rails, providing with polyvinyl chloride snap fit beading, panels of 100 milimetre X 20 milimetre printed and laminated and inserting 2 numbers 6 milimetre diameter bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge. Item / Page No : 13 / 520 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing coloured glazed earthenware wash hand basin of 45 centimetre X 30 centimetre size including cold water piller tap / cold and hot water piller tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including poly vinyl chloride waste pipe and tap upto the outside face of the wall.Making good the damaged surface, testing excetra complete. Item / Page No : 67 / 272 Specification No : Bd.V.30 Spec. Page No : 565

Providing second class burnt brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water manually, striking joints, on unexposed faces, racking out joints on exposed faces and watering, excetra complete. Item / Page No : 1 / 197 Specification No : Bd.G.1 Spec. Page No : 313 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. Item / Page No : 8 / 209 Specification No : Bd.L.4 Spec. Page No : 368 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing conference main table of size 1800 milimetre long X 900 milimetre depth X 750 milimetre height, made up of 18 + 18 milimetre thick MDF top with polyvinyl chloride membrane finish and waterfall edge profile. Aluminium anodizied finish beeding of 4 milimetre thich is running all over the table top edge. Gable ends is aerofoiled shape with front edges in polyvinyl chloride membrane finish and rest in prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and data wiring. Modesty panel to be made of 18 milimetre thick prelaminated particle board with polyvinyl chloride edge band. Access flap for wire manager 1 No. Item / Page No : 32 / 358 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and arrangemnt of mid back chair, normal synchronized mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong nylon base with leather upholstery. Item / Page No : 42 / 359 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing 3 seater public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Item / Page No : 44 / 359 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Tile based aluminum partition system of 1800 milimetre X 1200 milimetre height made of 60 milimetre thick aluminum frames having two separate race ways for laying electrical and computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition and other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 X 16 pan head machine screw and washer with aluminum post cover. Post cover of snap on fashion to be connected on aluminum connectors. All visible aluminium to be in anodized finish. The top / exposed sides of the frame and posts should be covered with horizontal / vertical trim and caps made of aluminum in anodized finish in order to enhance its look. Upper tiles of partition to be in soft board or marker tile of 9 milimetre thick and prelaminated partical board lower tiles in laminate finish of 9 milimetre thick on both the sides. Item / Page No : 25 / 356 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing in position (as per Indian Standard : 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre X 38.10 milimetre X 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre X 31.75 milimetre X 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts, excetra complete. - With colour anodising with box. Item / Page No : 37 / 251 Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, excetra including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, excetra of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of Engineer in-charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners, excetra). 50 milimetre diameter pipe, 1.5 milimetre thickness and weight 1.92 kg/Rmt. Item / Page No : 73 / 371 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing curtain with 25 milimetre steel rod with wall fixture material for bane curtain in American plate type pattern of approved shade and design etc complete. Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Bed Side locker-Providing & Fixing Bed side Locker Number of size 12 inchx14 inchx30 inch with 5.5. Including locker of Finished etc. complete, slandered size As per details drawing and design Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Bed side stool: Providing & Fixing Bed Side Stool Number of size 12 inch x 12 inch x 18 inch with Stainless Stoel finished etc. Complete. As per details drawing and design. Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

, Mayo Trolley: Providing & Fixing movable Mavo's Humber Number Trolley of size 19 inch x 24 inch x 30 inc with Stainless Steel finished etc. details drawing and design. height should be adjustable, variable from 50 inch As per details 30 inch Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Plain Bed Providing & Fixing Plain Bed of size 30 Number inch x72 inch x 22 inch with standard size of Bow's 3.5. on all side. bed Legs and panel in Mild steel etc. complete. As per details drawing and design. and as directed by engineer in charge Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Delivery Table / Labour Table: Size: 174" W24" Number 127"-34" head up. height adjustment, total tilt withcwliding hand reat and saline bar with leodiecting bowl it has als rane17 in thick chan having thick Stay the top 10 quality matt finish framand: wality with19uese, netim material, the tray in quality mattz 304 thick 88304 ilere are have special natra thick Santa rexin coated, mattress will have 25 thick, 30 density sleep well flash with 50 hestinn backing (before execution sample should be get approved from engineer in charge Bate an per R. A. No.31 Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

ICU Fowler Bed Four Screws size 1.78", W-32"Number 12 12 24"-32" Head up, knee bend, tilting and heightadjustment with four manual screws, Folding side rails and head side rails, Nylon body 51 inch breakable and awiveling wheels. The bed with mattress and saline bar. The head bows, leg bows. side rails and panel sides are of stainless steel. Internal parts are powder coated. Provision of castors-ll type lega with 600 mm height with 125 (5") dia high grade synthetic body castors, two with, biake, two w/o brake. The main and the levers are of bright M.S. Flats and C.R.C.A. pipes 60-30 for the base and other pipe of 1.2 mm thick. The pressed parts are 1.6 mm thick all M.S. partsS are coated with 40 micron powder coating, the panels are having as pipe and flat, with. I am thick ma sheet, having the edge of 5.5. Pipe 45-19304 quality 1.2 ms thick pipe. height and the head up is with hand set having actuator motor, and the tilting and knee bend actuated manually with screw. head bows, leg bows and side rails are of 25 1.2. thick ss 304 pipes, the saline bar is of as pipe 304 grade, the mattress is of foam 28 density of sleep well braud 25 mm thick, pasted over 40 mm thick hition shech. The ?????? is of extra strength the wheels are 5-1 inch two swiveling and two fixed, nylon body. Rexene wheels with bearings. kalpar made. motors used are phoenix make 150 m travel 24 volts actuatora with ith remote control having impact proof hand set. ote it includes density foam mattress having 25mm thick, 28 sleepwell flash with 50 mm heatlon backing with pillow, IV bar bar of 16 mm 1.2 mm thick with 8 mm sa bar 304 quality.. side railing, head bows and leg bows. (before execution sample should be got approved from engineer in charge) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Streture Trolley Stainless steel: Size:L78" W22" H33" 5.5. removable atreture, SS pipe frame P.U. wheels. provision of saline rod in 55, material of handle 55, with provision of storage frav. provision of oxygen cylinder, provision of urine bag holder, the streture top is of 0.8 mm S. S. with 25 mm dia 5.5. pipe frame, the base frame in of 32 mm dia and 25mm dai 5.5. pipes, with 5-1 resin wheels with nylon moulded wheel barcket, kalpar sake (before execution sample should be got approved from engineer in charge) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Instrument Trolley: Size:L30 W22" 835" completely Stainless steel sterile trolley with two shelves,and 5-1 inch bylon wheels swivelling type. For keeping instruments, twe shelf of i em thick 304 quality matt Finish with 25 mm dia, 1.2 mm thick Stainless steel pipe frame. 5/1 inch swivelling wheela with Ryzen body with kalpar brand make.. (before exec ample should be got approved from engineer in chargel Rate as pe Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Dressing Trolley Size: L18" W18 835" completely Stainless steel steriletrolley with two shelves, and 5-1 nylon wheels swivelling type. Stainless steel hand wash bowl provided in the Front side for dressing, satiniss steel pipes used are 1.2 mm thick, stainless steel rods used are 304 quality matt finish, stainless steel sheets used are 1 thick 104 quality ss matt finish. (before execution sample should be got approved m Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Staff Locker Box: size: 148" M18" H58" MS powder coated CRCA sheet 0.7mm thick provision for individual lock, door is having (before execution sample should engineer in charger be got Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and fixing of free standing table of size 1350 milimetre X 750 milimetre X 750 milimetre Top to be made of 25 milimetre prelaminated particle board with polyvinyl chloride edge band, bent leg to be chrome finish as per drawing. Item / Page No : 29 / 357 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing table of size 1200 milimetre X 600 milimetre X 750 milimetre Top made from 25 milimetre prelaminated particle board. All edges are covered by 2 milimetre thick polyvinyl chloride edge bands glued by hot melt glue applied by auto edge banding machine. Legs C Shape made from cold rolled close annealed sheet with powder coat finish. Modesty panel made from 18 milimetre both side prelaminated particle boards. All edges are covered by 0.8 milimetre polyvinyl chloride edge bands glued by hot melt glue applied by auto edge banding machine. Keyboard tray (without mouse tray) metal powder coated - black colour, central processing unit Trolley metal powder coated - black colour, 3 drawer pedestal unit having overall size 392 milimetre long X 450 milimetre depth X 680 milimetre height with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 milimetre prelaminated particle board. Item / Page No : 28 / 357 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providiing and fixing cement concrete bench of trap metal M-20 grade and size 1.50x0.55x0.875m as per detailed drawinf etc complete. Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Add insurance 1.00% Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Add G.S.T. 18% Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Please Enable Macros to View BoQ information