Construction of 20 Nos. of Assistant Commissioner and 40 Nos. of Inspector Quarters (Stilt plus 10 floors) with development works at Ganapathy East Gandhipuram in Coimbatore City. (Group I)

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3: Earth work excavation in Soft disintegrated rock (including refilling) b. 2 to 3 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6: Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering couse

37.1 : White washing 3 coats (slaked)

37.2 : White washing 1 coat (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

d. 63 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74.Charges for fixing of "Fan"

76. 8 SWG wire

78. Earthing Station IS3043 (Type I)

86 : Anti termite treatment

87: S & F of ELCB Single phase

ANNEXURE 2.1.1 : Supplying and filling with gravel

2.1.3 : Filling sand (using crushed stone sand)

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1: P.C.C. 1:8:16 using 20 mm broken brick jelly

3.8.2 : P.C.C. 1:4:8 using 40 mm HBSJ (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade Concrete (using crushed stone sand) b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

f) In Fourth Floor

g) In Fifth Floor

h) In Sixth Floor

i) In Seventh Floor

j) In Eighth Floor

k) In Ninth Floor

l) In Tenth Floor

8.2.1.1 : Standardised concrete Mix M25 Grade Concrete (using crushed stone sand) g) In Fifth Floor

h) In Sixth Floor

i) In Seventh Floor

j) In Eighth Floor

k) In Ninth Floor

l) In Tenth Floor

m) In Eleventh Floor

8.3.1.1 : Standardised concrete Mix M30 Grade Concrete (using crushed stone sand) a) In Foundation and basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

f) In Fourth Floor

9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with Admixture a) In Stilt floor/Ground Floor

b) In First Floor

c) In Second floor

d) In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

l) In Eleventh Floor

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 110 mm tk (B.P.) with Admixture b) In stilt floor/Ground Floor

c) In First Floor

d) In Second floor

e) In Third floor

f) In Fourth floor

g) In Fifth Floor

h) In Sixth Floor

i) In Seventh Floor

j) In Eighth Floor

k) In Ninth Floor

l) In Tenth Floor

11.2.1.1 : Brick Partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 70 mm tk (B.P.) with Admixture a. In Ground floor

b) In First Floor

c) In Second floor

d) In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

12.1.1 : Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) with Admixture a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a) In Stilt/ Ground Floor

b. In First floor

c. In Second floor

d. In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a) In Foundation and basement

b In Stilt / Ground Floor

c. In First floor

d. In Second floor

e. In Third floor

f. In Fourth floor

g. In Fifth Floor

h. In Sixth Floor

i. In Seventh Floor

j. In Eighth Floor

k. In Ninth Floor

l. In Tenth Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. Vertical walls

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1 : Supplying and fixing of Single Leaf solid core flush door shutter of thickness 35mm b) door size 900 mm x 2100mm (Single Leaf)

21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm M20 grade (with out vibrating charges) (using crushed stone sand) a. 900 x 2100mm

22.3.3: T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

23.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws size of b. 750x2100 mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand) in C.M 1:2, 10mm tk

29.9.1 :Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).(using crushed stone sand)

32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

34.1: Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk (using crushed stone sand) including Super plasticizer a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Providing two coats of Plastic Emulsion PAINT including primer for inner walls

38.8 :Providing two coats of Exterior Emulsion PAINT including primer for outer walls

43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M 30) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - G.F. (using crushed stone sand)

56.4.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)

57.1.1. : S & F of E.W.C (White) 500mm with "P" or "S" TRAP (using crushed stone sand) with double flapped seat & seat cover

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1 : Gully Trap using Chamber bricks of size 23x11x7.5cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way) (using crushed stone sand)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1: Supplying & Delivery of ELCB Three phase

98.3.2 : TW panelled single door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf) for Qtrs

112.1 : S & F of Exhaust Fan 225mm dia

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361 : Concrete Designer Tiles flooring (using crushed stone sand)

361.5.1. : Supply and Laying of Ivory Vitrified tile Flooring in C.M 1:3 20mm Thick (using crushed stone sand)

367 : Providing wooden (melamine) polish for new wood

379.4.2.1 : S & F of Granite tile of size 2' x 1', 10mm Thick For kitchen arrangements (Jet black) in CM 1:3, 20mm thick. (using crushed stone sand) b) In First floor

c) In Second floor

d) In Third floor

e) In Fourth floor

f) In Fifth Floor

g) In Sixth Floor

h) In Seventh Floor

i) In Eighth Floor

j) In Ninth Floor

k) In Tenth Floor

383: S&F of Cuddapah sink 600 x 600 x 200mm

383.4.2 : S&F of Stainless Steel sink 600 x 600 x 200mm

Annexure II A1: Run of 4 Wires of 10 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

A2: UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Louvered Ventilators of from the profile the size of outerframe 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced

A3: Supplying and fixing in position of UPVC window of casement type.

A4: S & F of SFRC manhole cover 600x600mm

A5: Supply and fixing of 9 watts LED bulb

A6: Supply and fixing of 4' 18 watts LED Tube Light

A7: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A8: Supply and fixing of 25W LED street light

A9: Supply and fixing of 12 watts LED bulb

A10: Supplying and applying of two coats of Wall putty for new Plastered surface

A11:Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection

A12: Design, Supply, Delivery, Installation, Testing, and Commissioning of Servicer Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 26 Persons/1768 Kgs with 11 Floors / 11 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the Standrard specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work .

A13: Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons / 884 Kgs with 11 Floors / 11 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the Standrard specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work .

A14: Supply, erection, Testing and commissioning of 100 KVA AMF Panel generator set.Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets).

S S Natarajan & Co