ANNUAL MAINTENANCE TO WALL TOILET KITCHEN PLASTERING ROOF TREATMENT FLOORING BATHROOM SANITARY FITTINGS AND OTHER MISC REPAIR IN MD ACCN IN RA BAZAR AOT AREA UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

M& L for providing Cement concrete 1:5:10 Type E 2 (using 40 mm graded crushed stone aggregate ,in foundations, filling and mass concrete for filling into sunken floor etc complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

S&F 2nd class hardwood, 'SAL', plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F in repair Ball catches with 8mm dia steel ball, brass body and striking plate including letting in and fixed complete all as specified and directed

S&F glazed, gauzed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick flush shutters, conforming to IS 2202 (Part-I) - 1999 solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Refixing of shutters in the same opening exc. 1 and n exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 156 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 300 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open ) 40 mm. complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F hasp and staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws, Size of hasp and staple 125mm complete all as specified and directed.

S&F in repairs brass chromium plated tubular curtain rod 25mm dia, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Supplied and fixed steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings (Note : Disturbed surface of wall shall be made good to true surface)

---------------BLANK--------------

Taking down old existing water proofing treatment from top of RCC/arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish upto 200 meter complete all as specified and directed

Applying two coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm each coat including cleaning surfaces complete all as specified and directed.

M&L for providing PCC (1:2:4) type BO, (using 12.5mm graded crushed stone aggregates) as in roof padding finished fair and even without using extra cement complete all as specified and directed.

Applying evenly a tack coat @1.20 kg/Sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/Sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per Sqm and finish the surface with aluminium paint at top @ 0.2 kg/Sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/Sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

M&L for 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard sheleves kitchen cuboard etc including taking down existing material complete all as specified and directed.

M&L for 6mm thick external teak wood lipping fixed to 18/19mm thick block or Veneered particle boards with nails complete all as specified and directed.

Supplied and fixed Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions and directed. ( Make:- METROC or METACIL or any other equivalent make as approved by GE.

Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed. Make : Everest, Charminar, UPAL.

M&L for 18-20 mm thick prepolished green marble stone(udaypur green) as on cooking plateform, step's treads and similar works laid & jointed with cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the edges complete all as specified and directed. Note:-Hole for gas pipe be provided.

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.11sqm but n.exc 0.18 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over and including 15mm thick screed bed or bedding layer in CM 1:6 CM screed complete all as specified and directed".

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.11sqm but n.exc 0.18 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in skirting / dados etc, set in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (square / rectangular) area of each tile not exc 0.36 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over CM screed and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed".

M&L for Glazed ceramic tiles coloured 300mmx 200mm , 6 to 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and and directed

M&L for Glazed ceramic tiles coloured 350x250mmx7 / 450x350x7mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and and directed

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round,such as in steps cooking plateform and other similar situation complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using liquid water proofing compound 200ml per 50 Kg of cement complete all as specified and directed. Note :- water proofing compound will be measured and paid seperately.

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for rendering 20 mm thick in concrete surface of sunken portion in CM 1:4 mixed with liquid water proofing compound 200ml in 50kg cement and surface finished even and smooth without using extra cement (WPC shall be measured and paid separately) complete all as specified and directed.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of ceiling ( plastered or un plastered ) including cornics etc and applying one coat of white wash complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls completeall as specified and direcrted.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces complete all as specified and direcrted.

M&L for complete removal of existing treatment and preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying two coat of oil bound distemper, complete all as specified and directed

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of white wash complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and providing and fixing new ones complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Refixing old steel tubing 15 mm dia of bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing old steel tubing 20mm dia of bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Supplied, hoisted and fixed in repair position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms Make - 'Prayag' / Polytuff complete all as specified and directed.

S&F in repairs pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs stop valves, 15mm bore dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed in repair 15mm dia bib cock long thread fancy type,brass CP with wall flange fixed as in repair complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed in repair 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed in repair 75 mm dia PVC pipe low density ( LDPE ) of pressure rating 6 Kgf / cm fixed to wall ceiling or laid in floor as waste pipe complete all as specified and directed.

Supplied and fixed UPVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) bends 75 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) 110 mm dia branch piece,single(single 'Y') equal or unequal complete all as specified and directed directed

Supplied and fixed PVC (SWR) 75 mm dia branch piece,single(single 'Y') equal or unequal complete all as specified and directed directed

Supplied and fixed UPVC (SWR) vent Cowl 75 mm bore complete all as specified and directed

Supplied and fixed in repair PVC (SWR) gully trap 125/100 mm bore setting and jointing with solvent cement complete all as specified and directed

Supplied and fixed in repair UPVC (SWR) floor trap 75 mm bore including jointing to waste pipe fixed in cement concrete complete all as specified and directed

S&F in repairs CP over head shower 100mm dia round shape flow (ABS body chrome plated with gray face plate) with rubit cleaning system complete all as specified and directed as per Cat No EOS-542N of ESSco or equivalent make approved by GE from the make specified and Appx 'C'

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity low level, white with inlet, ball valve float and handles including brackets fixing plug and 60mm long brass screws etc complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair plate rack of stainless steel, sheet 1mm thick for kitchen overall size 1200x900x180 mm ,fixed with plugs and washers on wall complete all as specified and directed.

Demolition and breaking up PVC drain pipes set in cement mortar of any size and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar as in floors, aprons, skirting / dados etc complete and removal of dismatled / demolished material from the site complete all as specified and directed.

Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Jain Engineering Works

M/S AMAR ELEKTRO CENTRE