PROVN OF WALL TILING IN CERTAIN MD ACCN AND WEATHER SHELTER AT VSV AND TOILET BLOCK AT AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD

Amount

B/R SECTION

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off outside of def land complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material outside of defence Land complete all as specified and directed by Engr-in-charge.

M&L for acrylic polymer-modified cementations high performance coating (two component) with high solid content and used with waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which resist up to 5 bars of positive hydrostatic pressure and form highly elastic complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engr-in-charge.

M&L for 450x350x7mm/350 x 250 x 7mm/300 x 200 x 7mm thick glazed ceramic coloured tiles as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-charge.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 25 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.

M&L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed by Engr-in-charge.

M&L for non-skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 Sqm, in floor etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile complete all as specified and directed by Engr-in-charge.

M&L for Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.

M&L for Green Marble of work 25mm thick (table rubbed and polished) in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following type complete all as specified and directed by Engr-in-charge.

M&L for 25 mm thick chequered cement concrete coloured tiles glossy finished of any shape any size set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick in CM 1:3 as on concrete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-charge.

S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge.

S&F in repair bib taps 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed by Engr-in-charge.

S&F grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed by Engr-in-charge.

S&F in repair 100mm dia , Cast iron soil, waste and vent pipes, sand cast pipe in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed by Engr-in-charge.

S&F in repair 75 mm dia Cast iron soil, waste and vent pipes, sand cast pipe in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate complete all as specified and directed by Engr-in-charge.

M&L for preparation of previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered surfaces on walls, chajjas etc and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1 to 3mm thick wall care putty complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered or un-plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment on walls, chajjas etc by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1 to 3mm thick wall care putty complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered or un-plastered surfaces of ceiling & applying one coats of white wash complete all as specified and directed by Engr-in-charge.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed by Engr-in-charge.

Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-charge.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/loose soil including returning filling in ramming earth in layers not exceeding 25cm, and removing surplus excavated soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point and making good surface complete all as specified and directed by Engr-in-charge.

Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engr-in-charge.

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level n.exc. 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-charge.

Demolition of Cement concretes any description (reinforced) and in any position, not otherwise complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:4:8 type D2 using 40mm Graded Aggregate in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under-reamed pillars and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in column, pillars, piers, post and struts complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in slab and shelves supported on wall, beams and columns in floors, roofs and landings etc. complete all as specified and directed by Engr-in-charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed by Engr-in-charge.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed by Engr-in-charge.

M&L for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed by Engr-in-charge.

M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work, not exceeding 200 mm thickness (horizontal or sloping) with fair finished surfaces of concrete complete all as specified and directed by Engr-in-charge.

M&L for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed by Engr-in-charge.

TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed by Engr-in-charge.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed by Engr-in-charge.

S&F steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (hollow tube, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E165) complete all as specified and directed by Engr-in-charge.

S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting etc with welded, riveted or bolted of Fe-410 Gde 250A complete all as specified and directed by Engr-in-charge.

S&F Mild steel screw bolts (machine made) of diameter of neck exc 16mm n.exc 20 mm with hexagonal or square heads at one end and screwed the other ,or screwed both ends ,each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm but n. exc10 cm long complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-charge.

M&L for bricks works with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in (1:6) complete all as specified and directed by Engr-in-charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-charge.

M&L for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n. exe 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC (1 :4:8) type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection/path/paving complete all as specified and directed by Engr-in-charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.

M&L for Machine Pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engr-in-charge.

M&L for 15mm thick rendering in cement mortar 1:4 to fair faces of brick masonary finished even & smooth complete all as specified and directed by Engr-in-charge.

S&F Powder coated Anodised aluminium frame and grill for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-charge.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing in Aluminium windows complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-charge.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type B-21 complete all as specified and directed by Engr-in-charge.

S&F 125 mm size aluminium handles, cast type anodised complete all as specified and directed by Engr-in-charge.

S&F 125 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F 250 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed by Engr-in-charge.

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engr-in-charge.

S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position including 20mm bore ball brass valve high pressure with polythene float and fly nut complete all as specified and directed by Engr-in-charge. (Note : PVC tanks shall be ISI marked and having two layers)

S&F of vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia waste coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement including CI brackets complete all as specified and directed by Engr-in-charge.

S&F Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bolts, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete all as specified and directed by Engr-in-charge.

S&F PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge.

S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed by Engr-in-charge.

S&F 20mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge.

S&F pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repirs Soap dish, Stainless steel, embedded in the wall approximate size 160x160x90mm complete all as specified and directed by Engr-in-charge.

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-charge.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over one coat of white wash complete all as specified and directed by Engr-in-charge.

E/M SECTION

M&L complete for wiring with cable of size 1.5 Sqmm single core copper multistrand conductor including continuous earth wire, using cable FRLS insulated(unsheathed) 1100 volts grade conforming to Is-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part-3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc and including necessary cement work including cutting chases pinning in making good to facing and pointing in cement mortar 1:3 to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge for followings:- Note: Cutting shall not be exceeded 4cm girth and 4cm width.

One light point controlled by one, one way switch

One fan point controlled by one, one way switch and

One 5 pin 5 amps socket point in same board with other switches.

M&L Complete For modular switch one way 6 amps 1 module complete all as specified and directed by Engr-in-charge.

M&L Complete for modular socket 2 in 1, 5 pin 6 amps 2 module complete all as specified and directed by Engr-in-charge.

M&L complete for ceiling rose surface Bakelite 3 terminal complete all as specified and directed by Engr-in-charge.

M&L complete for PVC/ polycarbonate type Lamp holder, insulated body, with back plate for batten fittings complete all as specified and directed by Engr-in-charge.

S&F energy saving LED lamp 15 Watt, 230 volts 50HZ complete all as specified and directed by Engr-in-charge.

S&F complete modular metal flush box 2 module including cutting of chassis and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge. Note: Cutting of chassis and making good disturbed surfaces and rate deemed to be included in quoted rate.

S&F complete modular metal flush box 6 module including cutting of chassis and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge. Note: Cutting of chassis and making good disturbed surfaces and rate deemed to be included in quoted rate.

S&F complete for modular white cover plate with frame 2 module complete all as specified and directed by Engr-in-charge.

S&F complete modular white cover plate with frame 6 module complete all as specified and directed by Engr-in-charge.

M&L in replacement for exhaust fan steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers, single phase, 230 Volt Ac 50 Hz with louver shutter / grill and connection complete all as specified and directed by Engr-in-charge.

Supply and lay or fixing or passing in replacement through pipe cable XLPE (FRLS) with aluminium conductor with heavy duty stranded 1100 volts size of 04 Sqmm 2 Core IS-7098 including associated works complete all as specified and directed by Engr-in-charge.

M&L for 1x 20 watts (4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including lamp complete all as specified and directed by Engr-in-charge.

M&L for 1x 10 watts (2 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including lamp complete all as specified and directed by Engr-in-charge.

M&L for MCB distribution board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar & din rail SPN dist board 4 way with 200 amps rated bus bar single door complete with necessary connection complete all as specified and directed by Engr-in-charge.

M&L complete for MCB single pole & neutral 240 volts, C curve-10 kA 40-60 Amp complete all as specified and directed by Engr-in-charge.

M&L complete for MCB single pole 240 volts, C curve-10 kA 6-32 Amp complete all as specified and directed by Engr-in-charge.

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete, including fixture and fitting such as switches, ceiling Roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed surfaces of walls, Floors, ceilings etc. complete all as specified and directed by Engr-in-charge.

Taking down carefully sub main wiring of size including batten and making good disturbed surface of wall complete all as specified and directed by Engr-in-charge.

M&L complete for wiring with cable of size 2 X 4.0 Sqmm single core copper multistrand conductor including 2.5 Sq mm single core for continuous earth wire, using cable FRLS insulated(unsheathed) 1100 volts grade conforming to Is-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part -3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc and including necessary cement work including cutting chases pinning in making good to facing and pointing in cement mortar 1:3 to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge.

M&L Complete For modular switch one way 16 amps 1 module complete all as specified and directed by Engr-in-charge.

M&L Complete for modular socket 2 in 1, 6 pin 6A / 16 amp 2 module complete all as specified and directed by Engr-in-charge.

S&F complete modular metal flush box 4 module including cutting of chassis and making good disturbed surfaces and rate deemed to be included in quoted rate complete all as specified and directed by Engr-in-charge.

S&F complete modular white cover plate with frame 4 module complete all as specified and directed by Engr-in-charge.

M&L complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2x4 sq mm and 1x4 Sq mm as in continuous earth wire drawn into & including PVC conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work including cutting chases pinning in making good to facing and pointing in cement mortar 1:3 to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge. Cutting not exc 4cm girth and 4cm width.

MOHIT ENTERPRISES (BID ID -3099646)

M/s R P Enterprises (BID ID -3114325)

M/S HARINDER SINGH (BID ID -3099603)

M/s Vijay Enterprises (BID ID -3098620)