REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION, SUBMAIN WIRING OF OTM AND MD ACCN AT SIGNAL RECORDS AND DEPOT REGT AND CERTAIN B/R E/M MAINT WORK FOR PAO (OR) CORPS OF SIGNAL BUILDINGS (OTM) UNDER GE (EAST) JABALPUR

Amount

Demolition of cement concrete in ground floor paving n.exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified.

Virified Ceramic tiles (light shade) 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n. exc 1.00 sqm, in floors etc laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Virified Ceramic tiles (light shade) 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.00 sqm, in skirting etc laid over & including 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non skid ceramic coloured & designer tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed.

M&L for glazed ceramic coloured & digital tiles 350 x 250 x 7/450 x 350 x 7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.

M&L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick CM 1:6 bedding complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20 to 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rendering 10 mm thick CM 1:4 complete all as specified and directed.

Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in CM 1:4 including point ing in white cement 1:2 using marble dust with admix ture of pigment to match with shade of granite, including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar or cement lime motar complete all as specified and directed.

M&L brick work with modular sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster or cement lime plaster from brick walls including racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing surface of newly plastered walls and applying two coats of oil bond distemper over a coat of alkali resistant priming preparatory to distempering complete all as specified and directed.

M&L for preparing surface of old plastered walls and applying two coats of oil bond distemper overa coat of alkali resistant priming preparatory to distempering complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L 3mm thick wallcare putty on wall complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces & also providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified and directed.

S&F 2nd class teak Hard Wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as specified and directed.

S&F 35 mm thick, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made soild PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30 mm thick ( stiles ), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specifications and drawings complete all as specified and directed.

M&L for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Anodised Aluminium grills of deco grill No DG-916 pattern thickness of grill 7.5 mm complete all as specified and directed.

S&F 5.5 mm sheet glass, ordinary quality and glazing exc 0.5 Sqm complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and with stainless steel wire staples complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

All as per srl item No 35 here-in-before but frosted glass at one side.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-1 complete all as specified and directed.

S&F 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-1 complete all as specified and directed.

S&F 100 mm long Mild steel but hings medium weight complete all as specified and directed.

S&F 75 mm long mild steel but hings medium weight complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F M.S 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete all as specified and directed.

M&L for preparing of new surface of wood and wood based materials of any description not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description and apply two coat of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth complete all as specified and directed.

S&F in repairs water closet vitreous China (squatting pan) complete including provision of lime concrete bedding vitreous china squatting pan orrisa pattern of size 580 x 440 mm, white, with CI 100mm bore P or S trap front or back inlet and foot rest any pattern excluding flushing cistern complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs vitreous China Wash Hand Basin, white, flat back size 550 x 400 mm including cutting for and pinning in ends of brackets including brackets but exclusive taps, waste, chain and leg porcelain stop pan complete all as specified and directed.

S&F in repairs Bib tap 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs Pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads, screwed down high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore Bib tap standard of cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed (minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S&F in repairs 15mm bore, angle/stop cock, fancy type, chromium plated, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore, Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repairs 15mm size PVC connection with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed.

S&F 75 mm dia, PVC bend complete all as specified and directed.

S&F 110mm dia PVC bend with access door complete all as specified and directed.

S&F 110mm bore PVC junction single 'T' equal with provided access door complete al as specified and directed.

S&F PVC 75mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F PVC 110mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F UPVC waste pipes in any length with or without ears with cement joints fixed to alls 100 mm dia complete all as specified and directed.

S&F UPVC waste pipes in any length with or without ears with cement joints fixed to alls 75 mm dia complete all as specified and directed.

S&F 50mm bore High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m in waste pipe for WHB and sinks complete all as specified and directed.

S&F in repairs waste coupling/fitting brass chromium plated for steel sinks,basins etc with long screwed shanks and fly nuts, flange and bedded in red head cement and other end fixed of bore 32/40 mm complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including edding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

M&L for 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement complete all as specified and directed.

Taking down 25 mm dia steel tubing and connections, including cleaning for refixing complete all as specified and directed.

Refixing old 25 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed.

M&L for 25 mm dia tubes, 'medium grade', galvanised, with all fitting; fixed to wall, laid in trenches including necessary cutting chasing pinning and making surface good complete all as specified and directed.

Taking down 20 mm dia steel tubing and connections, including cleaning for refixing complete all as specified and directed.

Refixing old 20 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed.

M&L for 20 mm dia tubes, 'medium grade', galvanised, with all fitting; fixed to wall, laid in trenches including necessary cutting chasing pinning and making surface good complete all as specified and directed.

Taking down 15 mm dia steel tubing and connections, including cleaning for refixing complete all as specified and directed.

Refixing old 15 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc) complete all as specified and directed.

M&L for 15 mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting, chasing, pinning and making surface good complete all as specified and directed.

Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Dismantling exc1000 lt and n.exc 2000 ltr cpacity water tanks and removing to store complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : PVC tank shall be ISI marked and having two layers.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs complete all as specified and directed.

S&F in repairs tubular towel rail aluminium anodised , 20mm dia, 60cm long between flanges in repairs complete all as specified and directed.

Demolition of RCC in any description and any position (reinforcement cut as required to facilitate demolition ) complete all as specified directed.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in CM 1:4 complete all as specified and directed.

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new drains, 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L for rendering 10mm thick plaster in CM 1:4, on the top of chajjas, concrete surfaces, finished even and smooth (without using extra cement) and mixed with integral WPC as per manufacturer's instructions but not less than 3% by weight of cement complete all as specified and directed. Note : WPC shall be measured & paid separately under releant item.

Supply only Integral water proofing compound (ISI Mark) complete all as specified and directed.

Demolition and taking out of cinder/lime/lean concrete from sunken portion of WC and bath and deposited complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sunken floor average thickness 40mm and making adequate slop towards spout pipe etc complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back,size of 430 x 370 x 340mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waiste pipe) complete all as specified and directed.

S&F in repair Soap dish, vitreous China white, approximate size 160 x 160 x 90mm complete and all as specified and directed .

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets complete all as specified and directed.

M&L in repair suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600 x 600mm compressing of GI powder coated main runner of dimension 39mm x 24mm x 0.8mm thick (thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (weight 0.007 Kg/clip), hold down clips (weight - 0.0035 Kg/clip), with provision of light fixture complete as per manufacturer instructions and complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

M&L for machine pressed precast coloured concrete interlocking paver block any shape and size of 80mm thickness with grey cement and pigment complete all specified and directed.

M&L for 50mm thick crushed stone sand/ river sand as in cushening layer below interlocking paver tiles well compacted to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for stone kerb of machine pressed coloured precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate, block of size 30cm x 30cm x 15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, holders, bell, bell push, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing adjacent to main switch board including making good to disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/capacity and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less than 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface complete all as specified and directed. Note - (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Rate is inclusive of cutting/chases of wall/floor/ceiling etc.

One light point controlled by one, one way switch complete all as specified and directed.

One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

One 3 pin 5 Amps socket outlet point on the same board with other switches complete all as specified and directed.

One 3 pin 5 Amps socket out let point on independent board complete all as specified and directed.

One bell/buzzer point controlled by one bell push complete all as specified and directed.

One light point controlled by two, two way switches complete all as specified and directed.

All as per srl item No 115 above but for one socket outlet 5 Amps on independent board with 2.5 Sqmm cable and 1.5 Sqmm earth wire complete all as specified and directed.

All as per srl item No 115 above but for one socket outlet 15 Amps on independent board with 2.5 Sqmm cable and 1.5 Sqmm earth wire complete all as specified and directed.

All as per srl item No 115 above but for one socket outlet 15 Amps on independent board with 4 Sqmm cable and 1.5 Sqmm earth wire complete all as specified and directed.

S&F switch piano flush type single pole, one way, 5 Amps complete all as specified and directed.

S&F switch piano flush type single pole, one way, 6 Amps complete all as specified and directed.

S&F witch piano flush button type, two way, 15 Amps complete all as specified and directed.

S&F socket out let, 2 in one, 5/3 pin, 5 Amps complete all as specified and directed.

S&F socket out let, 2 in one, 3 pin, 6 Amps complete all as specified and directed.

S&F switch socket combination, 5 Amps, 5 pin, flush type complete all as specified and directed.

S&F switch socket combination, 6 Amps, 5 pin, flush type complete all as specified and directed.

S&F switch socket combination, 5 in 1, 5 pin, 5/15 Amps flush type universal complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F call bell/buzzer AC 230 Volt single pole ding dong complete all as specified and directed.

S&F bell push, flush type 5 Amps complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F lamp holder, PVC/ polycarbonate type with back plate for angle holder complete all as specified and directed.

S&F electronic regulator 100/120 Watt step type complete all as specified and directed.

S&F LED light fitting 1 x 9 Watt / 1 x 10 Watt bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED lights fitting 1 x 20 Watt, 220 Volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1 x 16 Watt, 220 Volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED building security light fitting 35 Watt, 230 Volt, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F round shape 12 Watt, 220 Volt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 Watt, 220 Voldt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 5 Watt, 220 Volt, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt, 220 Volt, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Fabricate, supply & fix GI pipe bracket 25mm dia 1.5m long & 2 set of clamps made out of 30 x 5mm M.S flat & fixed with anchor bolt suitable for 25 Watt security light fitting including taking down of old bracket complete all as specified and directed.

S&F earth enclosure with 2 pin earth plug sokcet complete with MCB SP, 20 Amps, flush mounting type. Make- LEGRAND/ ABB/L&T

Taking down ceiling fan /exhaust fan of any size or make complete all as specified and directed.

Hanging only ceiling fan/exhaust fan any sweep size by providing fan hooks in proper manner and making connection with 3 Core copper cable including painting complete all as specified and directed.

Hanging only ceiling fan 1200mm/1400mm/1500mm during wiring sweep by providing fan hooks in proper manner and making connection with 3 Core copper cable including painting complete all as specified and directed.

Hanging only exhaust fan and connecting up including provision of cable from ceiling rose/ connector to fan complete all as specified and directed.

S&F capacitor 2.5/4 MFD suitable for ceiling fan/exhaust fan complete all as specified and directed.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces complete all as specified and directed.

S&F Sheet Metal Enclosure for TPN DBs, powder painted with bus bar 200 Amp rating, neutral link, IP-43-IK09 protection grade, 415 Volts TPN with 4 way Double door complete all as specified and directed.

S&F Sheet Metal Enclosure for SPN DBs, powder painted with bus bar 200 Amp rating, neutral link, IP-43-IK09 protection grade, 415 Volts SPN with 4 way Double door complete all as specified and directed.

S&F Sheet Metal Enclosure for SPN DBs, powder painted with bus bar 200 Amp rating, neutral link, IP-43-IK09 protection grade, 415 Volts SPN with 8 way Double door complete all as specified and directed.

S&F Sheet Metal Enclosure for SPN DBs, powder painted with bus bar 200 Amp rating, neutral link, IP-43-IK09 protection grade, 415 Volts SPN with 12 way Double door complete all as specified and directed.

NOTE FOR ITEM NO 150 to 153. (i).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall/DB to be fixed on wall including frame made out of M.S flat 40 x 5mm. (ii) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

Supply only PVC insulated unsheathed bright annealed bare copper conductor 1 Sqmm cond. const (No./Dia mm) (32/0.20) single core industrial cable & PC insulated, PVC round sheathed multicore indistrial cable for voltage grade up to 1100 Volt as per IS-694:1990 as as site requirement complete all as specified and directed.

Supply only PVC insulated unsheathed bright annealed bare copper conductor 1.5 Sqmm cond. const (No./Dia mm) (30/0.25) single core industrial cable & PVC insulated, PVC round sheathed multicore indistrial cable for voltage grade up to 1100 Volt as per IS-694:1990 as as site requirement and complete all as specified and directed.

Supply only PVC insulated unsheathed bright annealed bare copper conductor 2.5 Sqmm cond. const (No./Dia mm) (50/0.25) single core industrial cable & PVC insulated, PVC round sheathed multicore indistrial cable for voltage grade up to 1100 Volt as per IS-694:1990 as as site requirement and complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the 2 x 4.0 Sqmm + 1 x 2.5 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the 2 x 6.0 Sqmm + 1 x 4.0 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the 2 x 10.0 Sqmm + 1 x 6.0 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

S&F wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the 2 x 16.0 Sqmm + 1 x 10.0 Sqmm earth wire sizes of FR in PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

S&F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 415 Volt, 63 Amps complete all as specified and directed.

S&F MCB SP, 63 Amps Isolator 240 Volts complete all as specified and directed.

S&F MCB SP, 40 Amps Isolator 240 Volts complete all as specified and directed.

S&F Isolator DP, 40 Amps 240 Volts complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 215 Volt, 20 Amps complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 215 Volt, 10 Amps complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Part-I (2009) including PCC foundation/chamber in mix 1:2:4 type B-1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Make : L&T/HPL/Scheinder confirming to IS-16444. Note - Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 25 x 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade crushed stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, charcoal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n.exc 50M and providing connection points with MS/GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note :- GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Taking down partly unservicable tube light fittings any type, and fixtures, etc, and refixing the same after repair complete all as specified and directed.

S&F LED bulb of 9 Watt complete all as specified and directed.

S&F LED bulb of 18/20 Watt complete all as specified and directed.

S&F LED lamp 40/45 Watt complete all as specified and directed.

S&F PVC rectangular block of size 100 x 100 x 50mm for mounting switches, sockets/fan regulators, etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 175 x 100 x 50mm for mounting switches, sockets/fan regulators, etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 200 x 150 x 50mm for mounting switches, sockets/fan regulators, etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 250 x 200 x 50mm for mounting switches, sockets/fan regulators, etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F PVC rectangular block of size 350 x 300 x 50mm for mounting switches, sockets/fan regulators, etc with 3mm thick plastic laminated sheet cover complete all as specified and directed.

S&F modular switch, 1 way, 6 Amps, 1 module complete all as specified and directed.

S&F modular socket out let, 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular switch socket combination, 6 pin, 3 module, 16 Amps complete all as specified and directed.

S&F modular Bell push 6 Amps, 1 module complete all as specified and directed.

S&F modular Electronic regulator 100/120 Watt step type complete all as specified and directed.

M&L for checking the unserviceable geyser and making serviceable by replacing the thermostate/heating element, PVC connection etc as per site requirement and tightening the connection, adjusting the thermostat, checking the power point of geyser and making servicing by tightening/replacing screws/ replacing the small piece of wire, etc complete all as specified and directed. Note : (i) Petty stores like insulation tape, screws, small piece of cable, etc shall be provided by the Contractor without any extra cost to the department. (ii) Replacing the PVC connection, heating element and thermostate shall be measured & paid separately.

S&F in replacement of heating element thread type 3.0 KW and fixed at solar water heater tank complete with 9" long thermostate veriable type complete with ISI Mark complete all as specified and directed.

M&L for replacement of Gl tubing medium grade 15mm bore with fitting, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F in replacement of bib cock 15mm bore cast copper alloy as per side requirement with crutch or butterfly handle , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

All as persrl item No 186 here-in-before but Angle cock/stop cock 15 mm dia.

S&F geyser thermostat of ISI marked, suitable for 20 degree to 80 degree centigrade in 25/50 liter capacity geyser complete all as specified and directed .

S&F heating element (triangular type) for 25 ltr Geyser of 2 KW rating to fulfill the requirement of geyser with complete accessories all as per site requirement complete all as specified and directed.

S&F heating element (circular type) for 25 ltr Geyser of 2 KW rating to fulfill the requirement of geyser with complete accessories all as per site requirement complete all as specified and directed.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors complete all as specified and directed. Notes : (i) Two wires of 6 Sqmm and one wire of 4 Sqmm and one run of PVC conduit shall be measured as one unit.

S&F MCCB 4 Pole, 415 Volt, Adjustable type, 400 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F Sheet Metal Enclosure for TPN DB 4 way 415 V olt complete all as specified and directed.

S&F Sheet Metal Enclosure for SPN DB 8 way 240 Volt complete all as specified and directed.

S&F Amp rating MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps complete all as specified and directed.

S&F MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified and directed.

Schedule of credit amount of Rs. 64,584.00 to be deducted during AOC.

J.P ENTERPRISES

a k builders

S K TRADERS