A/Mtc. W/S Scheme Palwal To...

Boring with 150 mm diameter casing pipe for hand pump/ tube well, in all casing soils except ordinary hard rocks requiring blasting, including removing the pipe after the hand pump/ tube well is lowered and tested.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well.

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tube well, including necessary bolts and nuts of required size complete. 125 mm clamp

Providing and fixing of all types of bends, tee, Upvc pipes etc i.e. is required for commissioning for submersible complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing of aluminium cable required for commissioning submersible from electric of meter to electric control panel. 6 Sqmm 3 core

Providing and Lowering 225 mm outer dia UPVC pipe (10kg/CM2) duly ISI marked complete in all respect as per directions of Engineer-in-charge

Providing, lowering, laying of 100 mm internal dia UPVC pipe (10kg/CM2) duly ISI marked complete includes dismantling of interlocking paver block , dismantling of CC excavation, laying of pipe, laying of CC and laying of IPB Etc..

Supplying erection, testing of fully automatic electric control panel board for T/Wells consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase prèventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board with box fitting with locking arrangement complete in all respect,Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in all respect 5HP capacity.

Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with jali (10kg/cm2) duly ISI marked, including hire and labour charges, fittings and accessories etc. allcomplete, for all depths, as per direction of Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, Unplasticised PVC medium wellcasing (CM) pipe of required dia (10kg/cm2) duly ISI marked, including required hire and labour charges, fittings and accessories etc. allcomplete, for all depths, as per direction of Engineer-in- charge.

Supplying, erection testing and commissioning of submersible pumping set of reputed make ISI marked. The motor totally enclosed to avoid pollution with a thrust bearing of adequate size to with stand weight of all rotating parts, single phase, 50 cycles 400 plus 10% voltage power supply with submersible, dynamically balance Gun Metal/ Stainless steel impellor, with stainless steel shaft protective sleeve set of supporting clamp 32mm i/d Upvc Nipple etc. complete in all respect to the satisfaction of the Engineer- in-Charge. Discharge 100 LPM Head 40 Mtr.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

HSR Items