Construction of Indoor Stadium (02 court) at Mouja- Durgapur, Panchayat- Saharkol, Block- Pakur, District- Pakur.

Supply & Installation Specification of Wooden flooring Surface board "RICOCHET SPORTS" BWF Approved TEAK/HEVEA/MAPLE WOOD SPORTS FLOORING finishing with 21mm thick, 53 to 93 mm wide and In random length In tongue and groove shape. The edges of the boards should have finger lock groove and the bottom side with air passgroove The under frame - Made of pine wood runners of 70mmx45mm, treated with anti-termite solution and

PVC sport flooring for Badminton Court: 100% PVC+ Glass fibre+ Imported fabric mesh Specification of Vinyl Flooring a)Thlckness-4.5mm b)Roll Size - l15x1.8 Mtr (4 Roll per Court) c) Warranty 5 Year d}Jem Surface

Supplying, installation, testing and commissioning of cubical type MV Panel made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof·, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 50mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable

Labour cess @ 1%

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for e/w in hardsoil as per specification and direction of E/I.( vide classification of soil item B)

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches

Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75A one brick flat soiling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shufering all work up to plinth level 1:4:8 (1 cement : 4 coarse sand (zone-1) : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing designation 75B brick work in C.M (1:6) in Foundation with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick morter joints cost of screening, materials, scaffolfing, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-1) : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal

Centering and shuttering including strutting, propping etc. and removal of form for lintels, roof beam, plinth beam, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for lintels, roof beam, plinth beam, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing TOR steel reinforcement of 8mm dia bars as

Providing TOR steel reinforcement of 10mm dia bars as

Providing TOR steel reinforcement of 20-25mm dia bars as

Providing designation 100 A brick work with fly ash lime brick (FLAG) conforming to IS 12894-1990 (9"X4.5"X3") in CM(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening, carriage of materials, scaffolding raking out joints to 15 mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing designation 112 mm thick reinforcement designation 100 A brick work with fly ash lime brick (FLAG) conforming to IS 12894-1990 (9"X4.5"X3") in CM(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening, carriage of materials, scaffolding raking out joints to 15 mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 250 mm wide brick drain in cement plaster (1:6) with av. 150 mm clear depth and 125 mm apron including cost of earthwork involved with 75 mm cement concret (1:4:3) over one brick designation 75A flat soling in proper and slope at the

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick bailast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling dressing & finishing the top smooth

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Providing one coat of snowcem of approved shade and make over old surface including washing cleaning and prepairing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing two coat of oil bound distemper of approved shade and make over new surface including washing cleaning and prepairing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing and laying Vitrified tiles in floor In different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm Including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the notch trowel, plier, wedge, dips of required thickness, leveling with the zero chipping diamond

Providing and laying 25mm thick kotah stone slab flooring of approved size texture and colour over 19 mm thick base of lime ,mortar

Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texture and colour over 12 mm thick base of lime ,mortar

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickess to be specificed by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados, over 12mm thick bed of cement mortar ;:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing in white cement

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickess to be specificed by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados, over 12mm thick bed of cement mortar ;:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing in white cement

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, Including hinges, jamb, lock Jamb, bead and if required angle threshold of mlld steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike.

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and fixing aluminium hanging floor door stopper, ISi marked.anodised {anodic coating not less than grade AC 1 0 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l.

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.

Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash

For shutters or doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separetly)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc, with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item}: With float glass panes of 4.0 mm thickness(weight not less than10kg/sqm)

Providing primer one coat of red lead paint of approved make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.110 mm rain water pipe

Providing and fixing on wall face unplasticied - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm

Bend 110 mm

Shoe 110mm

Providing and

Fixing factory made uPVC door frame, made of Upvc elcturded sections, of size 65 mm JC SS mm with wall thickness 2.0 mm (± 0.2 mm}, corners of the door frame to be mitred cut and Jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 12S mm long stainless steel hinges to the frame, fixing the frame with Jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction or Engineer-in-charge. beading shall be paidIn basic item): With float glass panes of S rnm thickness (weight not less than 12.SO ko/snml

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing precoated galvanised Iron profile sheets (size, shape and pitch or corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15·18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied In single length upto 12 metre or as desired by Engineer-In-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.Sx 55 mm) with EPOM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. TRUSS SHEET ADD @ 10% FOR LAPPPING

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1S-18 microns using self drilling/ self tapping screws complete : RIDGES PLAIN (500-600 mm)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying. fitting and fixing 20mm dla M.S. Bar 1 meter long holding down bolt with nuts washers 100X100X6mm plate fitted and fixed with cement concrete (1:24) as per approved design all complete as per building specification and direction of E/I.

Point Wiring in PVC Conduit, with Modular type Switch Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. Group C

Twin control Point Wrining in PVC Conduit, with Modular type Switch:-Wiring for twin control light point/fan point/ exhause fan point/ cal bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with 2 way modular type switch, modular plate, suitable size of GI box etc as required.

SUBMAIN WIRING COPPER IN PVC CONDUIT Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/ recesse medium class PVC conduit 2x1.5 sq mm + 1x1.5 sq mm Earth Wire

2x2.5 sq mm + 1x2.5 sq mm Earth Wire

2x4.0 sq mm + 1x4.5 sq mm Earth Wire

2x10 sq mm + 1x10 sq mm Earth Wire

Supplying and fixing PVC/G.I box following sizes on surface or in recessed with suitable size of phenolic laminated sheet cover 75mmx75mmx50mm deep

72mmx146mmx48mm deep

210mmx206mmx48mm deep

Maximum 12W, High efficient recess mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP40, Ambient temp-0 to 45DegC, CCT - 4000K, 50,000 hrs @ L70 life. Driver efficiency>85%,

9" (230mm) metal exaust fan

S/F Batten holder :- Supplying and fixing battrn / angle holder including connection etc as requried.

5/6 amps, one way switch

S/F 'C' series, MCB:- Suppling and fixing ,240 volts "C"series miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with 6/32 amps/ single pole

40 amps, DP

S/F S.P. MCB DB : Supplying and fixing following way single pole nutral , sheet, MCB dstribution board , 240 volts ,on surface/recess, complete with tinned copper busbar,neutral busbar,earth bar,din bar, detachable gland plate,interconnection, 8 way, single door

6 way, single door

S/F SP MCB blanking plate :- Suppling and fixing Single pole blanking plate inexisting MCB DB complete etc. as reauired.

S/F HRC fuse type. TP&N switch disconnector:-Providing and fixing following capacity doble pole/ TP&N sheet metal switch disconnector fuse unit in existing metal board, with ISi marked HRC fuses, including drilling holes in metal board, making connections, etc as requried.

S/F Panel montude change over:- Providing and fixing following capacity 4 pole panel mounted change over switches in existing cubcile panel board, making connection earthing the body

S/F Busbar chamber:- Providing and fixing following capacity busbar chamber with 4 strips of sutiable size made of copper, heavy duty, complete with all accessories including connections, earthing the body, etc as requried.

S/F HRC fuse type TP&N switch disconnector:-Providing and fixing following capacity doble pole/ TP&N sheet metal switch disconnector fuse unit in existing metal board, with ISi marked HRC fuses, including drilling holes in metal board, making connections, etc as requried.

S/F S.P. MCB DB :- Supplying and fixing following way single pole nutral, sheet, MCB dstribution board, 240 volts,on surface/recess, complete with tinned copper busbar,nutralbusbar, earth bar,din bar, detachable

S/F 'C' serise, MCB:- Suppling and fixing ,240 volts "C"serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB complete with connections, testing and

S/F rewireable doubl

e pole/ TP&N switch disconnector :- Providing and fixing follwing capacity double pole / TP&N sheet metal switch disconnecter fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried.

70 sq. mm, 3.5 core

35 sq. mm, 3.5 core

MV Cable Laying upto 35 Sq mm in ground:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required.

MV Cable Laying upto 95 Sq mm in ground:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required.

Supply of 48" (1200mm) AC ceiling fan

20/22 watt LED tube light

15/16 watt LED bulb

30W LEDFlood light

50/60W LED Flood light

4 pole MCCB 160 A,35 KA with fixed thermal magnetic

4 pole MCCB 63 A,16 KA with fixed thermal magnetic

4 pole MCCB 100 A,16 KA with fixed thermal magnetic

4 pole MCB 40 A,16 kA with fixed thermal magnetic

4 pole MCB 63 A,16 kA with fixed thermal magnetic

16 A Socket+ switch

200 amp 415 V heavy duty three phase with neutral bus bar chamber.

LED Indicator switch

Voltmeter

Ameter

C.T. Coil of CT ratio 200/5 IS 2705 part -3

160 amp 415 V heavy duty three phase with neutral bus Change Over

Earthwork in excavation(As per I.S. 3114/1965 for laying of different types and sizes of pipe so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.

Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification for soil item-A& B

Supplying and fixing male ended 15 mm dia brass bib cock of approved quality (wt. not less than 350 grms) with extra socket all complete as per specification and direction of E/I.

Providing and- fixing brass/Cl. stop cock of approved quality all complete as per specification and direction of E/I. Brass stop cock 15mm dia

Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I. 32 mm and weight not less than 700 gms.

40 mm and weight not less than 1.0 kg.

Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle slope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (A) 580mm long width (C) With 10 lit low level P.V.C. cisterns

Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of 'Hindustan 'Parry" or any other approved I.S.S make wifi 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings with C,l.or R.S. brackets, standard size G.I. flush pipe with fitting clamps.lSmm C.I. bodv brass spindle stoo cock of aoDroved oualitv weight not less than 400grams, 15mm P.V.C./Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including

Supplying, fitting and·fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other 1.5.5. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Making holes in walls for laying H.C.I. pipes and restoring the same after pipe laying as per specification and direction of E/I. (i)125mm thick wall

(ii)250mm thick wall

Supplying, fitting and fixing bathroom fittings of approved make and as per 15 specification all cost complete as per direction of E/1. (all rates have been adopted from the basic rate from SOR+ 15% for labour and Contractors profit) ALL JAGUAR FITTING piller Cock (Long Neck) (for basin)

4 way diverter for concealed fittings

Towel Rail 24"

Tumbler Holder

Glass shelf 22'

Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.

Labour for alying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, banning rod, night guard, Red light and barrier etc. all complet as per specification and direction of E/I.

Supplying labours, tools and tackles for testing of laid, R.C.C. spun pipes upto specified lead water all complete as per specification and direction of E/I. {water to be supplied free of cost departmentallv}.

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not less than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Supplying laying fitting and fixing NP2 R.C.C spun pipes all complete as per direction of E/I.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of

20 mm nominal outer dia

25 mm nominal outer dia

32 mm nominal outer dia

Providing and fixing PTMT grating· of approved quality and colour. Circular type 100 mm nominal dia

125 mm nominal dia with 25 mm waste hole

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.110 mm rain water pipe

Supplying, fitting and fixing the following items complete with allnmaterials as per specification and direction of E/I.Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror

Bend 110 mm

Shoe 110mm

Polythene water storage tank of ISI mark (eg Sintex /Sinter /himgiri/gangotri etc with cover & locking system

Providing and fixing on wall face unplasticied - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm

HYDT: Cost of Drilling 200 mmx165mmx125 mtr.deep bore well in all kind-of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsa

nd cost of transportation of rig machine annd other vehical up to Site. (a) From 0.00 M ta 50.00 M below G.L.

(b) From 51.0 M to125.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-Charge. 200 mm nominal size dia

Development of tube well in accordance with IS: 2800 (part I) andlS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the

Providing and fixing suitable size threaded mild steel cap or sp t welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia

Providing and fixing M.S. clamp of required di to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Supplying 100mm dia submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller.

Supply fitting and fixing of slandered m ke starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I.

Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELSmake including all taxes ,royalty etc all complete job as per direction of E/I.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Cnarge. 50 mm nominal outer dia Pipes

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shufering all work up to plinth level 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing 12 mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.

Making soakpit 2.5m diameter 3.0 metre deep with 45x45 cm dry brick honeycomb shaft with bricks and S.W drain pipe 100mm diameter, 1.8 m long complete as per standard design

Add Carriage of materials Cement Lead 5 km

Steel Lead 5 km

Sand Lead 100 km

S/Chips Lead 10 km

Labour cess @ 1%