WELCOME MAINTENANCE OF OFFICERS ACCN, CLEANING AND REPAIRS OF SEWAGE LINES, MANHOLES, SEPTIC TANK, SOAK WELLS, PLUMBING, SANITARY FITTINGS, FENCING, BOUNDARY WALL AND OTHER CONNECTED WORKS AT DRDE GWALIOR UNDER GE I RND DELHI

Amount

M&L for preparation of old decorated plastered or un plastered surfaces by brooming or steel wire brushing; scraping down, smoke soot, moulds, moss and efflorescent salts, trading oil and grease and applying one coat of white wash on wall complete all as specified and directed.

All as per srl item No. 1 above but on ceiling

Removal of existing treatment by scraping down old decorated surfaces on walls complete all as specified and directed.

M&L for 2mm thick (1mm thick each coat) wall care putty on walls finished even and smooth complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion on walls, white or tinted as approved complete all as specified and directed.

Removal of existing treatment by scraping down old decorated surfaces on ceilings complete all as specified and directed.

M&L for 2mm thick (1mm thick each coat) cement based wall care putty on ceilings finished, even and smooth complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion on ceilings, white or tinted as approved complete all as specified and directed.

M&L for washing, rubbing down and stoping of old distempered and painted surfaces of walls including removal of nails, filling pits and cracks with putty and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for washing, rubbing down and stoping of old distempered and painted surfaces of ceilings including removal of nails, filling pits and cracks with putty and applying one coat of destemper oil emulsion complete all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel or iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed..

M&L for preparation of old decorated surfaces by brooming or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and grease spots and applying one coat of cement based paint on wall complete all as specified and directed.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles on vertical surfaces size 250x350/350x450, 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Non - skid ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic light shade coloured tiles 10 mm thick, area not (square/rectangular) exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic light shade coloured tiles 10 mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down steel tubing and connections 25mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

M&L for cutting chases in brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc making good, cutting not exc 10 cm girth complete all as specified and directed.

Refixing 15mm bore galvanised steel water tubing with new GI fittings in new or old position fixed to wall and ceiling or laid in floors complete all as specified and directed.

Refixing 20mm bore galvanised steel water tubing with new GI fittings in new or old position fixed to wall and ceiling or laid in floors complete all as specified and directed.

Refixing 25mm bore galvanised steel water tubing with new GI fittings in new or old position fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F 15mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F 25mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs kitchen sink made of stainless steel 1.00 mm thick with wastes, coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1.00 mm thick with waste coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs 15mm dia cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia cast copper alloy chromium plated stop valves, angle type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm dia cast copper alloy chromium plated stop valves, fancy type with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair brass chromium plated shower rose with swivel joints, 125mm dia, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair PVC connection 15mm size 450mm long with 2 Nos PTMT end nuts with washer complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550mm x 400mm including CI/MS brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair 32mm waste coupling of PTMT, half or full threaded (minimum weight 45gms) complete all as specified and directed.

S&F in repairs 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, stretched length 90cm with PVC coupling socket complete all as specified and directed.

S&F in repair 15mm dia cast copper alloy chromium plated fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair chromium plated health faucet with 1 M tube 15mm bore and hanging hook complete all as specified and directed.

S&F in repair chromium plated butterfly spray jet for EWC with 1M long flexible tube 15mm bore provided with end nut and washer complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flush pipe etc. complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provn of lean concrete bedding, connections to flushing pipe and making good disturbed portion of floor to match existing surface complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flushing pipe inclduing connecting to WC complete all as specified and directed.

S&F in repair 15mm bore cast copper alloy chromium plated three way laboratory cock (deck mount installation type), screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm dia cast copper alloy chromium plated two way stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rail 600mm long including brackets complete all as specified and directed.

S&F in repair powder coated aluminium alloy drapary (curtain) rod 25mm dia fancy type with fixing brackets, end cap studs complete all as specified and directed.

Supply only powder coated aluminium alloy brackets for curtain rods complete all as specified and directed.

S&F in repair internal fitting of requisite pattern and size for 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed in wooden or metal frames complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm in wooden or metal frames complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality not exc 0.50 sqm in each pane fixed with wooden beads or putty in wooden or metal frames complete all as specified and directed.

M&L for 18/ 19 mm thick pre laminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white provided with 6mm thick (width equal to thickness of board) polished teakwood lipping all around, fixed to timber frame work/ steel frame work in cup board shutter/ shelves including dismantling of old boarding, any description, fixed with screws complete all as specified and directed.

S&F Mild steel bright finish or electrogalvanised continuous (piano) hinge 40mm width of flaps and fixed to cup board shutter complete all as specified and directed.

S&F 40mm dia mild steel bright finished cupboard knobs fixed with nut, screw and washer complete all as specified and directed.

S&F 100 mm size aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down shutter of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F 30 mm thick solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rails; panelling of plain colour PVC sheet sealed to the stiles and rails with suitable PVC sheet beading, joined together with solvent cement complete all as specified and directed.

S&F 35mm thick glazed or gauged shutters, open related and prepared to recevie glass, gauge etc (without sash bars) divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.in window, ventilltors etc sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (b) complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 100mm size mild steel butt hinges cold rolled, medium weight complete all as specified and directed.

S&F 75mm size mild steel butt hinges cold rolled, medium weight complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section, 200 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section, 100 mm long complete all as specified and directed.

S&F extruded anodised aluminium alloy handles fabricated type 150mm long grip complete all as specified and directed.

S&F Extruded anodised aluminium alloy handles fabricated type 100mm long grip complete all as specified and directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern mild steel springs including roller and roller plate fixed in repair complete with screws to wooden frames and by welding to steel frame complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces over 10 cm width or girth and two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Cleaning of under ground sewage line, 100mm dia to 250mm bore, any depth clogged with solid or semi liquid waste, mud or sludge by manual rodding or by mechanical means or by pressure water flushing sprinkling fresh lime and disposing off the sludge hygeinically complete all as specified and directed.

Cleaning of manholes up to depth of 1.5M by taking out deposited waste, sludge, mud, silt & other foreign materials by manual or mechanical means sprinkling fresh lime and disposing off hygeinically complete all as specified and directed.

Cleaning of manholes of depth exceeding 1.5 M but n. exc 3.00m by taking out deposited waste, sludge, mud, silt & other foreign materials by manual or mechanical means sprinkling fresh lime and disposing off hygeinically complete all as specified and directed.

M&L for Cleaning of septic tanks upto 50 users capacity by dewatering, sprinkling fresh lime, desludging, desilting and removing sludge including taking out foreign materials of any form, sprinkling fresh lime removing the same out side MoD land disposing off hygeinicallycomplete all as specified and directed.

M&L for Cleaning septic tanks 100 users capacity by dewatering, sprinkling fresh lime desludging, desilting and removing sludge including taking out foreign materials of any form, removing the same out side MoD land disposing off hygeinically complete all as specified and directed.

M&L for Cleaning septic tanks 200 users capacity by dewatering, sprinkling fresh lime desludging, desilting and removing sludge including taking out foreign materials of any form, removing the same out side MoD land disposing off hygeinically complete all as specified and directed.

M&L for Cleaning septic tanks 400 users capacity by dewatering, sprinkling fresh lime desludging, desilting and removing sludge including taking out foreign materials of any form, removing the same out side MoD land disposing off hygeinicallycomplete all as specified and directed.

Cleaning existing storm water drain of any size and shape by desilting & emptying including taking out drain cover & refixing in the same position complete all as specified and directed.

M&L for Cleaning of blockages of nahani trap, floor trap, bottle traps, gully traps, P or S traps of WCs, 100mm/ 75mm dia including drain pipes upto first manhole, drain pipes between gully trap to first manhole to maintain internal sewage system with manual/ pressure flushing pump, flexible rods and other necessary equipments on any height of floor ( Max G+2 floor) complete all as specified and directed.

Notes for item No. 84 to 92 :- 1 Rate shall includes for all tools and plants required to carry out the cleaning works. 2. Contractor or his representative will be required to report the complaint cell to collect the complaint slip from concerned JE on all working days and on Sundays and holidays in special cases of requred. 3. All complaints shall be attended and rectified within 24 hours of handing over of complaint slip. 4. In case the complaint is not rectified within the time limit, contractor shall be liable for a penalty @ Rs. 50/- per cpmplaint per day of delay beyond time limit prescribed above. 5. Additional manpower shall be provided by the contractor, if required, to rectify the complaints within time limit. No claim wahatsoever shall be admissible on this account.

Excavation in trenches n exc 1.5m in width & n exc 1.5m in depth for foundation etc. and getting out in soft/loose soil complete all as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers n exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated materials soil not exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (salt glazed stone ware or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed.

Dismantling of reinforced cement concrete of any description and in any position complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed to drain pipe 150mm bore of pipe including packing under and haunching against the sides of pipe after they are laid complete all as specified and directed.

M&L for 150mm bore salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

BLANK

M&L for Brickwork with old retrieved bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6. complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down plaster of any description on brick or stone wall including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing of new plastered surfaces and applying two coats of cement base paint over alkali resistant priming paint complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (20 mm graded stone aggregate) in copings and the like including necessary formwork and weathering, slightly rounded or chamfered angles and throating, finnshing the surfaces of concrete neat complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (20 mm graded stone aggregate) in surface channels, drains and benching in manholes etc complete all as specified and directed.

M&L for finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

M&L for precast RCC 1:2:4 nominal mix type B1, using 20mm graded stone aggregated in cover slab for manholes, septic tanks, drains etc. including necessary form work complete all as specified and directed. NOTE: - Reinforcement shall be measured separately.

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, cranking and binding with mild steel (annealed) wire not less than 0. 9mm dia complete all as specified and directed.

S&F factory made RCC manhole covers with frame grade designation LD-2.5 rectangular, clear opening of frame 450x600mm as per IS 12592:2002 complete all as specified and directed.

Taking down soil, waste and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends etc. and removal from site (measured overall as fixed complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches, floor etc complete all as specified and directed.

S&F PVC (SWR) bends, any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends, any radius 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

M&L in repair PVC (SWR) floor trap of dia 75 mm with grating, including jointing to waste pipe and making good to the floor to match the exising surface complete all as specified and directed.

M&L for cleaning existing water tanks exceeding 250 litres and not exceeding 500 litres capacity by disconnecting, setting aside (or lowering if required), removing all scales and dirt from tanks and from mouths of circulating pipe etc. hoisting, reconnecting and refixing in position and writing date of cleaning on the tank with synthetic enamel paint complete all as specified and directed.

M&L for cleaning existing water tanks exceeding 500 litres and not exceeding 1000 litres capacity by disconnecting, setting aside (or lowering if required), removing all scales and dirt from tanks and from mouths of circulating pipe etc. hoisting, reconnecting and refixing in position and writing date of cleaning on the tank with synthetic enamel paint complete all as specified and directed.

BLANK

BLANK

BLANK

S&F rotational moulded polythylene water storage tank 500 litre capacity, cylendrical vertical with closed top, hoisted and fixed in position including dismantling old unserviceable tanks complete all as specified and directed.

S&F rotational moulded polythylene water storage tank 1000 litre capacity, cylendrical vertical with closed top, hoisted and fixed in position including dismantling old unserviceable tanks complete all as specified and directed.

S&F in repair 20mm bore GI nipple suitable for HDPE water tanks complete all as specified and directed.

S&F in repair 25mm bore GI nipple suitable for HDPE water tanks complete all as specified and directed.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes complete all as specified and directed

S&F in repair 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes complete all as specified and directed.

S&F in repairs 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 25mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Dismantling barbed wire fixed to any type of standard rails straining bolts (each line wire to be measured) complete all as specified and directed.

Dismantling chain link fencing, wire mesh, any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

S&F mild steel as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel or iron surfaces, treating ends of posts etc. of any description and girth, not otherwise described, area tarred exc 0.1 Sqm but n exc 0.5 Sqm each and treated with tar or coal tar black paint complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description not exceeding 10cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Supply only galvanised mild steel plain wire 2.5 to 4mm dia complete all as specified and directed.

S&F for Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm and diameter of neck 11 to 15 mm complete all as specified and directed.

BLANK

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for providing and laying 60mm thick factory made cement concrete M-35 grade paver blocks made by table vibratory method using PU moulds, glossy finish of approved colour, design & pattern, laying by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and directed.

M&L for providing and laying factory made M-25 grade cement concrete kerb stone fixed in position to the required line, level and curvature including necessary earthwork, jointed with cement mortar 1:3, making joints with or without grooves, thickness of joints not more than 5 mm (except at sharp curves) complete all as specified and directed.

M&L for preparing new brick, stone, plastered and concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over priming plaster coat complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with 1.5 sqmm multi stranded PVC FRLS insulated unseathed copper conductor cable FRLS including PVC Casing & caping of size 25 mm width for one light point or fan point, bell point controlled by one switch including PVC insulated unsheathed 1.5 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly and making good the distrubed surfaces matching with existing with using existing sunken boxes complete all as specified and as directed.

M&L for point wiring for 3 pin socket outlet, 5 amps, independent, with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable PVC conduit of size 20 mm dia plasitc laminated sheet 3mm thick, PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces and matching with using existing sunken boxes complete all as specified and as directed.

M&L in repair Sub main wiring with two single core PVC FRLS insulated cable 4 sqmm (Nominal dia) copper conductor multistranded including PVC concealed conduit 20 mm dia ISI marked & 4 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity complete all as specified and directed. Note:- 3 run of 4Sqmm cable and one run of PVC conduit shall be measured one unit (RM)

M&L in repair Sub main wiring with two single core PVC FRLS insulated cable 10 sqmm (Nominal dia) copper conductor multistranded including PVC casing caping 25 mm width ISI marked & 10 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity complete all as specified and directed. Note:- 3 run of 10Sqmm cable and one run of PVC conduit shall be measured one unit (RM)

S&F switch piano type 5 Amp one way AC 230 volts complete all as specified and directed.

S&F of socket outlet 2in - 1, 5 Amp 3 pin AC 230 volt complete all as specified and directed.

S&F switch socket outlet 2in - 1, 6 Amp 3 pin AC 230 volt complete all as specified and directed.

S&F switch Socket outlet 2 in 1, 5 pin 5 Amp and 15 Amp multi purpose socket outlet AC 230 volt complete all as specified and directed.

S&F in repair ceiling rose of size 65 x 50mm 3 terminal AC 230 volt complete all as specified and directed.

S&F lamp holder angle/batten holder back light type with base plate suitable for 230 volt complete all as specified and as directed.

S&F in repair door bell AC 230 volt ding dong single phase complete all as specified and as directed.

S&F in repair LED Tubelight rod 20 watt 240 volts complete all as specified and directed.

S&F in replacement MCB SP 6 to 32 Amps 10 KA 'C' Series,240 V complete all specified and directed

S&F in repair MCB SPN 40 to 63 Amps 10 KA , 'C' Series 240 V complete all as specified and directed.

S&F in repair MCB TPN 63 to 100 Amps 10 KA 'C' Series 415 Volts complete all as specified and directed.

S&F in repair MCCB 3 pole , 125 Amps, 415 Volts, 16 KA breaking capacity and connections including spreader terminals complete all as specified and directed.

S&F in repair sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including single pole MCB 20 Amps complete all as specified and directed.

S&F in repair of sheet metal enclosures for DBs when MCB to used SPN 12 way double door powder coated factory made with separate neutral and earth links with IP 43 protection, fixed on wall /metal board/wooden board including making all incomming and outgoing connections with suitable copper lugs complete all as specified and directed.

All as per item srl No 171 above but TPN 4 way.

S&F Round shaped recess mounted 15 watt, 220 V AC LED luminaire , full output luminaire for modern offices with CRCA powder coated body and new generation high effciency PMMA diffuser to provide soft glare free light complete with driver,holders & LED Lamps suitable for modular / POP/ Gypsum ceiling complete including disconnecting and taking out old U/S light fittings complete all as specified and directed.

S&F surface and wall mounted 20 Watt LED tube light fitting box type with driver,holder with extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser input voltage AC 230 V, 50 HZ complete all as specified and directed

S&F in repairs of bulk head luminarie with LED 10 watt lamps Hexagonal shaped with engineering plastic housing and frame with opal PMMA defuser complete including disconnecting and taking out old unserviceable light fittings complete all as specified and directed.

S&F energy saving decorative wall mounting LED Lighting fixtures as mirror light made out of poly corbonate with high output diffuser, 2 feet , 10 watt LED and making connections complete all as specified and directed

S&F in repair energy saving decorative wall mounting LED lamp fitting made out of poly corbonate including 1x9/10 watt LED bulb and making connections complete all as specified and directed.

S&F in repairs plastic laminated bakelite hylem sheet of size 12 cm x 12 cm , 3mm thick, cut to required size and shape including making holes and necessary cuttings for fitting of switches/ sockets/ regulators complete all as specified and directed

All as per Item ser No. 178 above but of size 12cm x 20cm

All as per Item ser No. 178 above but of size 20cm x 25cm

S&F in repair PVC Rectangular block for mounting switches, sockets, regulators etc.with 3 mm thick plastic laminates sheet cover of size 100x100x50 mm deep complete all as specified and directed

All as per Item ser No.181 above but of size 200x150x50 mm

S&F in repair Modular switch 1 Way 6 Amp , 1 Module AC 230 volt complete all as specified and directed.

S&F in repair Modular switch 1 Way 16 Amp , 1 Module AC 230 volt complete all as specified and directed.

S&F in repair Modular socket , 6 A-2/3 pin combined , 2 Module AC 230 volt complete all as specified and directed.

S&F in repair Modular socket , 6 A/16 Amp -2/3 pin combined , 2 Module AC 230 volt complete all as specified and directed.

S&F in repair Modular white cover plate with frame but 4 module complete all as specified and directed.

S&F in repair Modular white cover plate with frame but 8 module complete all as specified and directed.

S&F in repair Modular white cover plate with frame but 12 module complete all as specified and directed.

S&F in repair for LED domestic bulb 9 Watt type 240 volts complete all as specified and directed.

M&L for rewinding of AC ceiling fan motor 1200mm sweep any make of fan with super enameled copper winding wire of existing size including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections complete all as specified and directed.

M&L for rewinding of Exhaust fan motor 300 - 450 mm sweep with super enameled copper winding wire of existing size including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with three core copper flexible wire of size 40/ 0.0076 mm of length not more than one mtr. with each fan complete all as specified and directed.

S&F in repair ball bearing of size 6200 / 6201 complete all as specified and directed.

Reshaping of mild steel shaft of ceiling fan to proper fixing the same including necessary lathe (machine) work complete all as specified and directed.

S&F in repair of fan regulator, electronic type, AC 230 volts suitable for 1200mm/ 1400mm sweep ceiling fan, stepped range, hum free complete all as specified and directed.

S&F in repair capacitor AC 220 volts 2.5 to 3.15 mfd complete all as specified and directed.

M&L in repair of PVC insulated twin core flexible copper couductor cable of size 40/76 guage complete all as specified and directed.

S & F installation , testing and commissioning in repair pressure die-cast aluminium housing with high power LED bldg security light fitting with IP-66 , 1x 25 Watt , fixed in position with and including 40 mm dia light grade GI Pipe made to shape not less then 1.2 Mtr long for mounting fitting with and including suitable size duly painted MS FI 40 x6mm clamps with nut and bolts , washers making electrical connection with and including three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed

S & F in repair Post top lantern LED type 20 watt, 230 V AC, outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete including making electrical connection with three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed.

lodhi builders

M/S Amit Traders