SPECIAL REPAIRS/ REPLACEMENT OF EXISTING OVERHEAD CONDUCTORS WITH UG CABLES AT GLOBE COMPLEX, PROVISION OF 20 X LIGHT CONNECTIONS IN 14 X TRAINING SHEDS AT WEAPON TRAINING AREA OF THE MLIRC, PROVISION OF STREET LIGHT FITTINGS AND PROVISION OF CERTAIN

Amount

M&L for point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including ISI marked PVC conduit pipes and conduit fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size 2nd class hardwood board with sunmica top fixed on wall/ steel members for mounting switches/ sockets etc. for one light point controlled by one switch 1 way all as specified and directed.

All as described in item No. 01 but for one fan point controlled by one switch and regulator

All as described in item No. 01 but for 05 Amps socket outlet on independent board.

All as described in item No. 01 but for one 05 Amps socket outlet on the same board with other switches.

M&L for sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 6 sqmm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provision of one run of 6 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly complete all as specified and directed. Note: Two runs of 6 sqmm cable, one run of 6 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length.

S&F switch, piano type, 5 Amps, flush button, 230 volts, AC, one way all as specified and directed.

S&F socket outlet 5 Amps 3 and 5 pin flush type multipurpose all as specified and directed.

S&F ceiling rose 3 terminal suitable for 230 volts AC supply all as specified and directed.

S&F single pole and neutral enclosure, powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V, including provision of one single pole MCB 20 Amps 'C' curve type all as specified and as directed.

S&F MCB DB SPN 2 Way without bus bars single door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall/ steel members and fixing of the MCB DB on board complete all as specified and directed.

S&F MCB DB SPN 4 Way with 100 Amps rated bus bars double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed.

S&F in repairs MCB DB TPN 4 Way with 200 Amps rated bus bars double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed.

S&F MCB DP 40A 10KA 'C' series 50Hz 240 Volts AC supply all as specified and as directed.

S&F MCB SPN 5-32A 10KA 'C' series 50Hz 240 Volts AC supply all as specified and as directed.

S&F surface mounting LED light fitting, 20W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, 20W LED strip, integrated electronic driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and directed. Make: HAVELLS LUMILINE PLUS or equivalent in CG/ Philips/ Wipro

S&F 25 Watts LED security light fitting, with pressure die cast aluminium housing and lens embedded PC cover having top opening separate driver compartment with IP65 protection, 25 Watts high power LEDs, electronic driver including all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block including provision of bracket made out of GI pipe light grade of suitable size and length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. complete all as specified and directed. Make: ENDURA PEARL model of HAVELLS or equivalent in Crompton Greaves/ Philips/ Wipro

S&F LED SOLAR street light fitting, 24 V, 45W, with aluminium die cast housing with optical lens, IP 66 class of protection, with in-built MPPT solar charge controller, automatic dusk to dawn operation optimised for lithium ferro phosphate battery of 12.8 V 35Ah - 2 Nos. with 12 hours working everyday, 2 Nos. of 100 Wp solar PV module, fixed to and including provision of 3mm wall thick hot dip GI octagonal tubular Pole of size 70/ 130mm dia x 6m high above GL with base plate, foundation bolts M24 x 650mm, etc all as recommended by the manufacturer including all accessories such as single arm GI bracket for light fitting 1m long x 48mm dia, module mounting stuctre internally pre wired complete including provision of 45 Watt high power LEDs and connecting up light fitting with copper conductor cable of suitable size all as specified and directed. Note: Excavation, earth work and PCC/ RCC foundation shall be measured and paid separately. Make: Havells 'Enviro LI-FE' model or equivalent model in Philips/ Crompton.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in soft/ loose soil for laying cables/ pipes, foundation of poles, etc. all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in hard/ dense soil for laying cables/ pipes, foundation of poles, etc. all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick with useful soil all as specified and directed.

Removing excavated soil n. exc 50m distance and depositing where directed at a level n.exc 1.5m above the starting point in soil all as specified and directed.

Supplying and filling approved riddled earth, spread in trenches as in cable cushioning all as specified and as directed. Note :- Punned thickness will be considered for payment.

M&L for burnt bricks, old size, sub class 'B' of designation 75, laid in trenches as in protection for UG cables all as specified and as directed.

M&L for 63mm outer dia double wall corrugated HDPE pipes, conforming to relevant IS, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches / under roads/ crossing etc. all as specified and as directed.

M&L for GI tubes, light grade, 40mm bore, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches / under roads/ crossing etc. all as specified and as directed.

Taking down existing over head ACSR conductors of any description and size all as secified and as directed.

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 sqmm x 4 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete all as specified and as directed. Note: Excavation, earth work cushioning, brick/ GI pipe protection shall be measured and paid separately under relevant items of this schedule.

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 50 Sqmm x 3.5 core, laid in trenches/ passing through pipe/ duct or fixed to wall/ pole including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete including taking down existing unserviceable cable of any description all as specified and as directed. Note: Excavation, earth work, cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

All as described in item No. 28 but cross sectional area of cable 25 Sqmm x 4 core

All as described in item No. 28 but cross sectional area of cable 10 Sqmm x 4 core

M&L for Plain Cement Concrete 1:4:8 type D2 using 40 mm graded stone aggregate for foundation of poles complete all as specified and directed

M&L for Reinforced Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation for poles including use of necessary form work complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.

All as described in item No. 33 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Supplying, installing, testing and commissioning of hi wall split type AC, 1.5 TR capacity, electric driven, single phase & EER 3.2, with indoor/outdoor units complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality including copper refrigerant pipings, electrical inter-connection control cables between indoor and outdoor units, insulated PVC drain water pipes complete with full charge of refrigerant gas and oil all as specified and as directed. Make: Samsung/ Voltas/ Daikin/ Blue Star/ Lloyd/ LG

S&F 5 KVA Voltage Stabiliser for automatic operation, Single Phase, naturally air cooled, indoor type, designed for input variation between 160 V to 260 V with output voltage stabilised at 230 V with accuracy of ± 2.5% including testing and commisssioning all as specfied and as directed. Make: V-Guard/ Volina/ Voltamp/ Alstom

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI wire 4mm dia (upto 7.5m long) by means of GI bolts nuts washers and GI wire protected by 15mm dia light grade GI pipe (upto 7.5m long) and watering arrangements with 20mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

LITE SYSTEMS INDUS

M/s.GOODWILL ELECTRICALS

ASHIRWAD ELECTRICALS

M/s. VIJAY ELECTRICALS