Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC | L1 | Accepted-AOC Bidder quoted L1 rates | |
| 2 | L2₹31.4 L+₹42,223 (1.36%)Rejected-AOC | L2 | Rejected-AOC Bidder not quoted L1 rates | |
| 3 | L3₹34.2 L+₹3.2 L (10.4%)Rejected-AOC | L3 | Rejected-AOC Bidder not quoted L1 rates | |
| 4 | L4₹34.4 L+₹3.4 L (11.1%)Rejected-AOC 7 4 DNYANESH SOCIETY WARJE MALWALDI PUNE 411 058 | PUNE | MAHARASHTRA | 411058 | L4 | Rejected-AOC Bidder not quoted L1 rates | |
| 5 | L5₹34.5 L+₹3.5 L (11.3%)Rejected-AOC | L5 | Rejected-AOC Bidder not quoted L1 rates |
Tender Value
Refer Docs
EMD Value
₹88,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH PUNE
NO 1 GENERAL BHAGAT MARG PUNE 411040
8389 COMPREHENSIVE REPAIRS TO JOINERY, ROOFING, CEILING AND OTHER MISC BR WORK IN OTM ACCN OF AICTS UNDER AGE BR I SOUTH PUNE
2022_MES_571330_1
8389 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
273 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹88,000
22 Feb 2023
26 Dec 2022
23 Jan 2023
26 Dec 2022
21 Jan 2023
9 Jan 2023
Amount
Demolition of cement concret in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10 mm thick cement plaster surfaces using CM (1:6) by using ready mix plaster (as per manufacturer's instruction) etc incl Sagol finish complete all as specified and as directed. (Make : Godrej, Build Well, Ascolite)
M&L for rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound by using ready mix plaster as per manufacturers instruction finished with sponge finish complete all as specified and as directed. (Make : Godrej, Build Well, Ascolite) (NOTE : WPC shall be measured and paid seperately)
Supply only integral water proofing compound complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint on wall complete all as specified and as directed.
M&L for two coats of OBD on walls over a coat of alkali resistance primer including preparation of new surfaces complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors apron etc complete all as specified and as directed.
Demolition of Brick work, solid block or stone masonry built in cement mortar or cement lime mortar after proper supporting of existing structure complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exe. 6 mtr mean radius with moduler bricks in CM 1: 6 complete all as specified and as directed.
M & L for 25 mm thick PCC (1:2:4) type B0 (12.5mm graded stone aggregate) as in leveling course of floor tiles etc complete all as specified and directed
M & L for PCC type B1 1:2:4 (using 20mm size graded stoner aggregate) as in cills, steps, bands, plinth courses, copings, apex stone, bed plates kerbs levelling course etc. complete all as specified and as directed.
M&L for 16 to 18 mm Granite (of any type) work (table rubbed and polished) in steps, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius complete all as specified and as directed.
M&L for rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
M&L for machine cut cuddappa stone slab 20 to 25 mm thick for making cooking platform etc. laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M & L for PCC (1:2:4) 100mm thick, type B-2, using 40mm graded stone aggregate as in hardstanding duly finished with broom finish whilst the concrete is green complete all as specified and as directed.
M&L for Vitrified coloured tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exc. 1.20 Sqm in floors, set an jointed in neat cement slurry and pointed in white or coloured cement to match including laid over 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for matt finished, Joint free coloured ceramic tiles 7 to 8 mm thick 400 x 400mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.
M&L for hand cut Kota stone slab, flooring 20 to 25 mm thick laid over and including 20mm thick cement screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing, grinding and mirror polishing etc complete all as specified and directed.
M & L for kota stone slab skirting/Dado 20 to 25 mm thick in wall including 10mm thick CM (1:4) backing coat set and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing, grinding and polishing complete all as specified and as directed.
M & L for coloured galzed ceramic tiles 600x300x7mm thick on vertical surfaces set and jointed neat cement slurry and pointed in coloured cement to match includng 10mm thick rendering on wall in CM 1:4 etc. complete all as specified and as directed.
M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection / path, floor sub-base etc. including finished the surface smooth and even without using extra cement laid in pannels complete all as specified and as directed.
M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.
M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment, glossy finish, any shape and size comforming to IS-15658-2006 of 60mm thick M-30 grade, laid over and including 75mm thick stone dust cushioning, laid dry to the profile over rammed earth and murrum filling in joints complete all as specified and as directed.
M&L for Cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in kerb stones with rounded top throating etc complete all as specified and as directed.
Dismantling of wall/ceiling boards of any thickness including cover fillets complete all as specified and as directed.
M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25 x 24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.
S&F POP false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish complete all asspecified and directed (Make :- Saint-Gobain, Armstrong, Diamond or Equivalent)
Dismantling AC corrugated/ semicorrugated sheets in roofing complete all as specified and as directed.
S & F 6 mm thick Asbestos cement, corrugated or semi-corrugated sheets in roof, walls etc fixed with 'L' or 'J' type hooks complete as in patches complete all as specified and as directed.
All as per Ser. item No. 30.00 above but fixing only complete all as specified and as directed.
All as per Ser. Item No. 30.00 above but serrated ridge for corrugated or semi corrugated sheets complete all as specified and as directed.
Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and as directed.
Dismantling battens for tiles, shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified
Dismantling timber scantling 40 Sqcm and over in section in any position (unframed wok) etc complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nails etc complete all as specified and as directed.
Dismantling timber scantling under 40 Sqcm in section in any position (unframed wok) etc complete all as specified and as directed.
M & L for IInd class hard wood plain fillets square, rectangular or triangular in section clean sawn secured with nails, sectional area exc. 13 Sqcm but not exc 25 Sqcm etc complete all as specified and as directed.
All as per Ser. Item No. 38.00 above but except fillet complete all as specified and as directed.
M&L for IInd class HW, clean sawn, battens, exceeding 5 and not exc. 15 Sqcm in cross section, spaced at 30 cm centres complete all as specified and as directed.
M&L for roof tiles Mangalore pattern interlocking at side joints laid dry etc complete complete all as specified and as directed.
All as per Ser. item No. 41.00 above but except tiles etc complete all as specified and as directed.
M & L for ridge tile or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc complete all as specified and as directed.
All as per Ser. Item No. 43.00 above but except tiles etc complete all as specified and as directed.
S & F for 25 mm thick 2nd class H/W boarding butt joints plained both sides complete all as specified and as directed.
All as per Ser. Item No. 45.00 above but fixing only complete all as specified and as directed.
M&L for IInd class hard wood clean sawn timber fixed as in scantling complete all as specified and as directed.
All as per Ser. item No 47.00 above but fixing only complete all as specified and as directed.
Taking down chowkat / frame of wooden or steel with shutters (w/o taking off shutters from frame) not exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames of wooden or steel exc 1.5 sqm & not exc. 4 sqm (without taking off shutters from the frames) complete all as specified and as directed
Taking down shutters of any description exc. 1 sqm but not exc 2 sqm each complete all as specified and as directed.
Taking down shutters of any description exc. 2 sqm each complete all as specified and as directed.
Taking down shutters of steel window by means of gas cutter of any size complete all as specified and as directed.
S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm including filled with PCC 1:3:6 type C-0 complete all as specified and as directed.
All as per Ser. item No 54.00 above but size of frame 105 x 60 mm complete all as specified and as directed.
S&F IInd class hard wood as in chowkats & frames, wrought, framed & rebated etc complete all as specified and as directed.
S & F IInd class hard wood 35mm thick factory made, flush shutter, solid core construction, with block board core and plywood face panels, commrrcial type on both side complete all as specified and as directed.
S & F IInd class hard wood 30mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass, gauge, etc. (w/o sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc; the size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F MS work as in guard bars,using with round or square bars & flat iron etc incl necessary drilling,welding etc complete & simillar articles confirming to Fe-290 grade E-165 complete all as specified and as directed.
S & F 3mm thick veneer over and including 35mm thick flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both side including 3mm thick, 1st Class HW (TW) beading all around on edging complete all as specified and as directed. (Note : 3mm thick veneer to be fixed both side of shutter and cost of same will be deemed to be included in unit quoted rates.)
M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
S & F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18mm etc complete all as specified and directed.
S & F Butt hinges of cold rolled mild steel, medium weight, 100mm size fixed with welding with existing MS door frame complete all as specified and as directed.
S & F aluminium anodized barrel tower bolt of extruded section 200mm size etc complete all as specified and directed.
S & F aluminium anodized sliding door bolt 300mm size etc complete all as specified and directed.
S & F aluminium anodized bow handle cast type 150mm size etc complete all as specified and directed.
S & F 0.50mm thick Aluminium plain sheet lining bottom rail of door fixed with nail complete all as specified and as directed.
S & F 150mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring and rubber shoe complete all as specified and as directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fxing in opening as per specification& drawing complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 149 of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.
M & L for PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in blocks for fixing hold fasts of door/window frames complete all as specified and as directed.
S&F 19mm thick commercial plywood conforming to IS-12823, Gde-I, quality, exterior grade, commercial type as in Kitchen Cabinet etc fixed with screw including 6mm thick, and 0.9mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture instructions at both side complete all as specified and directed.
S&F in repairs Plain fillets in Ist class hard wood, sectional area exc 13 & not exc 25 sqcm, wrought, fixed with screws etc complete all as specified and as directed.
S&F in replacement continuous Piano hinges, mild steel bright finished or electro galvanised width of flap 30 mm complete all as specified and as directed.
S&F in repair 150mm size, CP fancy type handle for cubboard, drawer etc. complete all as specified and as directed.
S&F in repairs Magnet catches and striking plate complete all as specified and as directed.
S&F in repairs 75mm aluminium anodised Hasps & Staples safety type and fixed with screws complete all as specified and as directed.
All as per Ser. item No 78.00 above but 100 mm complete all as specified and as directed.
S&F in repairs 25 mm dia powder coated aluminium alloy curtain rod of medium grade complete all as specified and as directed.
S&F in repairs fancy type powder coated bracket suitable for curtain rods complete all as specified and as directed.
S & F three track sliding window with two or more shutter with 4 mm thick tinted glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge:- (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844 (f) Glazing Clip 19352
All as per Ser. item No. 82.00 above but with provision of opening for AC complete all as specified and as directed by Engineer-in-Charge.
S&F Aluminum single leaf door on pivots alongwith hydraulic door closer (Aluminium Extruded section), door lock, handles, 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using aluminium powder coated sections as given in 'JINDAL' Catalogue complete all as directed by Engineer-in-Charge. a) Rectangular tube 14005 b) Shutter vertical 19501 c) Shutter top rail 19503 d) Shutter Middle rail 20060 e) Shutter Bottom rail 19511 f) Glazing clips 19352
S&F aluminium powder coated partition of required size using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with and including 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes. (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352
Dismantling of wrought iron of any description not otherwise provided for, complete all as specified and as directed.
M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete as directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of old sheet complete all as specified and as directed.
Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m complete all as specified and as directed.
Demolition of cement concrete in any position on roof slab and paving not exc 15cm thick (below or above roof slab) un-reinforced complete all as specified and as directed.
M & L Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces using Readymix Plaster. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, 3mm thick non woven, polyester, weighing not less than 3.5 Kg/sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge
M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in leveling course of roof, chajja coving and base slab for tank complete all as specified and as directed.
Disconnecting existing tank of 500Ltr, 1000Ltr or 2000 ltrs capacity, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting & refixing in position (cleaning, repairing etc measured separately) after carrying out necessary roof treatment including necessary fittings and GI pipes if required. (Note : Necessary bypass arrangements for water supply is to be carried out by the contractor till completion of roof work.)
Removing building material exc. upto 1 KM total distance including loading, unloading and stacking at the destination to a distance not exc. 5 KM complete all as specified and as directed. (NOTE : Please Note that minimum two axel dumper to be deployed by the tenderer for removing of building material and nothing extra payment on this account will be admissible on this account.)
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches/floor complete all as specified and as directed.
Re-fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches/floor complete all as specified and as directed.
S & F in repairs 110mm bore, PVC (SWR) bends any radius complete all as specified and as directed.
S&F hydraulic door closer aluminium body suitable for door shutter of 850 to 1000mm in width and of weight between 61 to 80 Kg of approved make of ISI Marked.
S & F in repairs double action floor spring hydraulically regulated made of minimum 1.25mm thick alloy sheet foundation box, with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty of approved make as per sample approved and directed by Engr-in-Charge.
S & F, 0.56mm thick aluminium plain sheeting as in kicking plate lining for bottom rail of the door shutter fixed with screws complete all as specified and as directed.
Hacking out old broken glass (any thickness, size , quality or description) from wooden or metal frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads etc including making good breakages in taking out and handling for removing to store or stacking for reuse as specified and directed by Engineer- in-charge.
S&F 3mm thick glass ordinary and quality and glazing with oil putty or wooden bedding all as specified not exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden bedding all as specified n. exc 0.5 sqm in each pane complete all as specified and as directed.
S&F in repair for stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel stapple to wooden/steel frames complete all as specified and directed.
M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.)
M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered) of any description, sand papered and dusted including complete removal of existing surface of wall and applying two coats of Oil Bound distemper over and including coat of 2mm thck wall care putty complete all as specified and directed
M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth including removing existing treatment completely and applying two coats of Weather shield paint complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
All as per Ser. item No 108.00 above but applying one coat on steel surfaces complete all as specified and as directed.
M&L for 3mm thick Veneered decorative fixed with screws and fevicol (veneer Century Make or equivalent specified here-in after) as to be fixed in raised wall paneling or flush shutters etc including melamine polish over veneer plywood complete all as specified and as directed.
S&F 12mm thick plywood, grade BWR, type BB, commercial faces, fixed with screws to timber frame work complete all as specified and as directed.
M & L for plain fillets of IInd class hard wood, wrought, exc 13 but not exc 25 Sqcm in section square, rectangular or triangular in section, secured with screws complete all as specified and as directed.
S&F in repairs IInd class hard wood of sectional area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall panneling work with melamine polish for architect look fixed with screws etc. complete all as specified and as directed.
Supply and Fixing in repair 5mm thick prelaminated PVC sheet as in solid wall lining, plain coloured or wood grain printed or as approved by the Engr-in-Charge inclusive of solvent & screws etc. complete all as per manufacture specification (Make : Rajshree / Duroplast / Plastopan or equivalent).
Supply only 5mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing as in grid / frame on wall for wall lining / paneling as per specification of manufacture complete all as specified and as directed.
S & F of PVC decorative beading of 2-5mm thick moulded/designed for PVC panelling complete all as specified and as directed.
L.K.R.TIWARI CONSTRUCTION
M/S BRJ & SONS
PRASHANT CONSTRUCTION
REKHA ELECTRICALS
Gauri Associates
M/S Sharvi Construction
M/s.BAJRANG CONSTRUCTION
SARATH ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .