Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 01₹3.3 LAccepted-AOC VPO DATARPUR TEH MUKERIAN DISTT HOSHIARPUR | HOSHIARPUR | PUNJAB | 144105 | 01 | Accepted-AOC 01 | |
| 2 | Not Admitted-Finance | - | Not Admitted-Finance Not qualified for AOC |
Tender Value
₹33.1 L
EMD Value
₹66,281
Closing Date
13 Dec 2022, 12:00 pmClosed
EXECUTIVE ENGINEER 1
WATER SUPPLY AND SANITATION DIVISION NO 1 PATHANKOT
Providing and Fixing MS and GI Pipe Line for Tikka Kui from Existing Water Supply Scheme Bhanguri Well No 1 Block Dhar Kalan Distt. Pathankot Under Kandi Area PM21
2022_WSS_92727_1
CIVILWORK_2022_23_11
Open Tender
Civil Works
Item Rate
120 days
DAC PATHANKOT
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹66,281
Yes
12 Jan 2023
23 Nov 2022
13 Dec 2022
23 Nov 2022
13 Dec 2022
23 Nov 2022
Amount
DISTRIBUTION SYSTEM
Providing, laying, fixing and testing M.S Pipe Lines as per IS 1239 and specials such as tees, bends, sockets, elbows etc in trenches in the ground including cutting, threading and testing etc complete with excavation
200mm i/d M.S Pipe Line (with excavation)
Providing, laying, jointing, fixing & testing of GI Pipe and specials Class-B including cost of material, complete in all respects including excavation and all taxes as per DWSS approved analysis of rates. (CSR-28.36 )
150mm i/d G.I Pipe Line (with excavation)
100mm i/d G.I Pipe Line (with excavation)
80mm i/d G.I Pipe Line (with excavation)
50mm i/d G.I Pipe Line (with excavation)(Through Jangal Area)
40mm i/d G.I Pipe Line (with excavation) (Through Jangal Area)
Making Connection with existing pipe line including cutting cost and tee union etc, labour for fixing specials excavation bailing out etc.
Providing, fixing and jointing ISI marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with had wheels, on G.I Pipe lines laid in the ground or inside buildings including all carriage complete.
50 mm i/d Gun metal peet valve heavy pattern
Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete.
C.I Double air valve (Size 40mm)
Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete.
Class PN-1.0 as per ISI with gun metal flap 150mm i/d Non-return valve
Construction of masonry sluice valve chamber size 0.60m x 0.60m as per DWSS standard Drawing & Analysis.
Contractor shall be quote rates only for dismantling of mettaled road & back filling with excavated earth fully compacted the restoration of the mettaled road to its original condition will be done by the concerned department i.e. PWD (B&R) PMB/Panchayati Raj) 90mm o/d 50 No road cut x 4 mtr = 200 mtr
Prov and fixing pressure gauge
Prov and fixing Main Switch 315 Amp (Galghat)
Prov and fixing Change over Switch Four Pole (Galghat) 200 Amp
Prov and fixing Main Switch 200 Amp (Bassa)
Prov and fixing Amper Meter 200 Amp (Bassa & Galghat)
Prov and fixing Volt Meter 0 to 500 Vlt(Bassa & Galghat)
Construction of stone band in field to protection frm erosion of soil
Repair of Pump Chamber (size 26ft x 21ft)
Terracing consisting of tiles 22.86cm×11.43cum× 3.83cm laid over25mm mud plaster, 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot @ 1.65Kg. Per Sqm on top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.
Flush/Ruled/Struck or weathered pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand)
Removing Doors and Windows (Steel or Wood) with chowkhats by making recesses in walls when the wall is not to be dismantled 4 No window, 4 No ventilator and 1 No door
Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled
Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge (1.25mm thick steel sheet of the specified section (standard design latest) including iron lugs (hold fasts) for iron hings conforming to PWD specification including bolts for fixing stops lock, notch bolts, hydraulic spring and finished with one priming coat of approved quality fixed in position including cost of cement concrete 1:3:6 for filling in the frame and cement concrete for 1:2:4 for lugs complete.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .