REPAIR/ MAINTENANCE OF EXTERNAL WATER SUPPLY SYSTEM AND ALLIED WORKS UNDER GE (W) JABALPUR

Amount

Supply and fix, in replacement, CI sluice valve with forged brass stem, Class PN- 1.6, ISI marked, with stainless steel spindle and flanged both ends with hand wheel conforming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm complete all as specified and directed, for the followinf sizes :

80mm bore.

100mm bore.

150mm bore.

200mm bore.

Supply and fix, in repair, integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with and including 600mm long medium grade GI pipe of suitable dia & necessary clamps of suitable size, if required, and PCC coping as per site requirement in PCC 1:2:4 Type B-0 using 12.5mm graded crushed stone aggregate and connecting up with & including two runs of single core PVC insulated, sheathed, mutistranded copper conductor cable of size 1.5 Sqmm drawn in and including rigid PVC casing caping heavy grade ISI marked not less than 20mm in diameter, with its accessories from Aviation light to DB (near bottom of OHT) complete all as specified & directed.

Material & Labour for PCC (1:2:4) Type B-1 using 20mm graded crushed stone aggregate as in thrust block / support pillar for pipe, holding of pipe with and including MS clamps 50 x 6 mm, nut and bolt etc, including finishing the concrete surface fair and even without using extra cement and making good the disturbed surfaces complete all as specified and as directed.

Cleaning and removing all silt, dirt, mud, etc. from inside the tank and from mouth of inlet/ outlet pipe and disposal of the same to a distance not exc. 50 m, and applying one coat of white wash on internal surfaces including preparation of old/wet surface and signboard writing with white enamelled paint on black background (height of letters 7.50 cm (minimum)) on column showing capacity of tank and date of cleaning of the OHT complete for the followings :-

Note for Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sludge lying on the bottom of water storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of Hydrogen Peroxide (H2 O2) inside the tanks as an anti-bacterial agent. 6. UV radiation of the tank. 7. Spray of bleaching powder in prescribed quantity after final cleaning of the tank. Cleaning shall be done in two phases.First cleaning shall be done in for all the overhead tank within one month of commencement of work and second cleaning shall be done ater six month of first cleaning of OHT. The height of overhead tank is almost 21 Mtr . The Cost of transportation for Vehicle, T&P and Man power, etc is deemed to be included in this job . it shall be the responsibility of the contractor to provide all necessry safety arrangements like safety belts, ropes, helmets, netting etc to all workers for their safety at working site for work at any height and during working hours, if any mishaps/ casualty happens, contractor shall be responsible for any compensation to workers or any other liability . Accordingly, unit rate quoted by the contractor shall be deemed to be inclusive of all these aspects.

OHT with capacity between 1 to 3.5 lakh Gallon(Imperial)

01 Lac gallons(Imperial) capacity OHTs

0.5 Lac gallons(Imperial) capacity OHTs

Below 0.5 Lac Gallons(Imperial) capacity OHTs

Cleaning and removing all silt, dirt and mud etc from inside / outside the reservoirs sump and from mouth of inlet/outlet pipe and disposal of the same to a distance not exceeding 50 m and applying one coat of white wash on internal surfaces including preparation of old/wet surfaces and signboard writing on wall surface out side with white enamelled paint (height of letters 7.5 cm minimum) on black enamelled paint back ground surface for the followings :- Notes for Mechanized cleaning and disinfection of Water Storage Tank : i. Mechanized Dewatering of water storage tank. ii.Removal of sludge lying on the bottom of water storage tank through special sludge pumps. iii.Cleaning of internal walls of water storage tank through High Pressure rotary Jets iv.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. v.Spray of H2 O2 inside the tanks as an anti-bacterial agent. vi. UV radiation of the tank. vii.Spray of bleaching powder in prescribed quantity after final cleaning of the tank.

10 Lac gallons(Imperial) capacity under ground sump having 2 cum silt (approx).

5 lac gallon capacity under ground/over ground sump having 1cum silt (approx).

01 lac gallon to 2 lakh gallon capacity under ground sump having 1 cum silt in each compartment (approx).

Less than 01 Lac gallons capacity under ground sump having 0.5 cum silt.(approx)

Supply and fix water level indicator, in repair, at existing position with copper float of 300mm dia & 400mm long, hollow box of 16 guage copper sheet fixed to steel wire rope of required length including brass pulleys with nylon bush and 50x50x6mm angle iron brackets for pulleys, indicator board shall be of 10 gauge of MS plate 200mm wide fixed on angle iron frame 30x30x5mm with angle iron stiffners and after prepration of surfaces, board shall be painted with two coats of synthetic enamel paint over & including a coat of red oxide primer & marking of levels on front face of board with black synthetic enamel paint as per existing pattern or as directed by Engr-in-Charge including all necessary fixing arrangements for fixing of water level indicator board as per site requirements complete all as specified and directed. Notes: (i) Quoted rate shall be deemed to be inclusive of all materials & labours, all tools/ plants, scaffolding with steel props for working upto approximate 25 M height as per site conditions and as directed. (ii) It shall be the responsibility of the firm/ contractor to provide all necessary safety arrangements like safety belts, ropes, helmets, netting etc to all workers for their safety at working site for work at any height and during working hours, if any casualty happens, firm/ contractor shall be responsible for the same and Government shall not be responsible for any compensation to workers or any other liability. Accordingly, firm's/ contractor's quoted rates shall be deemed to be inclusive of all these aspects.

S&F, in repair, including connecting and commissioning MU - G20 fully automatic submersible pump star delta starter, relay range 28 - 42 A, in sheet metal enclosure conforming to IS/IEC60947-41, protection from overload conditions, single phasing, phase reversal & imbalance, auto restart features, vibration proof enclosure with IP 54 protection class, Power/Pump ON/OFF indication, voltage and ampere complete all as specified and as directed. ( Cat part No. SS95975 of Make L&T or equivalent in Schineder/Seimens as approved by GE)

S&F, in repair, including connecting and commissioning MU - G30 fully automatic submersible pump star delta starter, relay range 30-50 A, in sheet metal enclosure conforming to IS/IEC60947-41, protection from overload conditions, single phasing, phase reversal & imbalance, auto restart features, vibration proof enclosure with IP 54 protection class, Power/Pump ON/OFF indication, voltage and ampere complete all as specified and as directed. (Cat part No. CS960008 of Make L&T or equivalent in Schineder/Seimens as approved by GE).

Material & labour for cleaning away all grass vegetation, scapling shrubs, bushes, under growth roots and trees upto zero level not exceding 30 cm grith and removing rubbish upto distance of 50 mtr outside the periphery of area under cleanliness complete all as specified and directed by the Engineer-in-Charge.

Material and labour rubber gasket of suitable size as per sample for fixing in sluice valve, NRV, flanges etc complete all as specified and as directed.

Supply and laying sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection 150 mm below & 80 mm above the cable as protection of cable complete as specified & directed. Note : Punned thickness of sand shall be measured & paid.

Material & labour for Best quality locally available, sub class B bricks (Old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of the cable complete all as specified and as directed by Engineer-in-charge.

Material & labour in replacement Brick mesonry valve pit of size 120x120x120cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50x50mmx6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrangement , brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.

Material & labour in replacement Brick masonry valve pit of size 75x75x60cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50x50mmx6m duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrangement , brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.

M & L in replacement Foot valve strainer of bore 100 mm dia ,ISI marked all as specified and dircted

Supply only Calcium based granulars disinfectant (Calcium Hypochlorite) for water treatement, more stable than chlorine gas and stronger than bleaching powder, 65% to 70% Chlorine content in the form of granulars (Packing in 45 Kg Plastic drum) complete all as specified and as directed by Engr-In- Charge

Supply only in replacement MS Nut and bolts (machine made) with hexagonal or square head at one end and screwed the other, each screwed end to be fitted with washers and nut, exc 5 cm but not exc 10 cm long and dia of bolt 10mm complete all as specified and directed.

Supply of chemical TCCA-90 (Trichloroisocyanuric Acid) in granular form, organic compound for swimming pool complete all as specified and as directed

S&F in replacement change over switch 4 pole 320 Amp, 415 Volts, Onload type, front handle type with enclosure including connection and testing complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Collect the water sample as directed,Testing of water sample from NABL Accredited Authorised Test Laboratory with following test listed as below complete all as specified and as directed by Engineer-in-Charge. (a) Turbidity(b) Ph Value ( C) Chloride (d) Copper (e) Fluoride (f) Free Residual Chlorine (g) Iron (h) Aluminium (j) Ammonia (k) Anionic detergents (l) Barium (m) Boron (n) Calcium (o) Magnesium (p) Manganese (q) Mineral oil (r) Nitrate (s) Phenolic compounds (t) Selenium (u) Silver (v) Sulphate (w) Sulphide (x) Calcium (y) hardness (z) Zinc

Supply and fixing MCCB 4 pole 63 Amps , 415 volts rupturing capacity 16KA including thimble on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB, as per site requirement complete all as specified and as directed

Supply and fixing MCCB 4 pole 100 Amps , 415 volts rupturing capacity 16KA including thimble on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB as per site requirement complete all as specified and directed .

Supply and fixing MCCB 4 pole 160 Amps , 415 volts rupturing capacity 25KA incl thimble on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB as per site requirement as per site requirement complete all as specified and directed .

Supply and fixing MCCB 4 pole 250 Amps , 415 volts rupturing capacity 25KA on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB as per site requirement complete all as specified and directed .

Supply and fixing MCCB 4 pole 400 Amps , 415 volts rupturing capacity 25KA on LT panel/feeder pillar box including dismantling /taking down existing unservieable MCCB complete all as specified and directed .

Supply, laying or fixing or passing through pipe commissioning and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core including taking down/out old UNSV cable from trenches/ducts/from pole/wall removing from site etc complete all asspecified & directed.

Supply, laying or fixing or passing through pipe commissioning and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core including taking down/out old UNSV cable from trenches/ducts/from pole/wall removing from site etc complete all asspecified & directed.

Supply, laying or fixing or passing through pipe commissioning and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 2 core including taking down/out old UNSV cable from trenches/ducts/from pole/wall removing from site etc complete all asspecified & directed.

Supplying and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and overall PVC sheathed in service connection, twin core 10 Sqmm stranded aluminum conductor cable flat or circular complete including dismantling of existing service connection all as specified and directed.

Supplying and fixing, in repair, 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and overall PVC sheathed in service connection, twin core 6 Sqmm stranded aluminum conductor cable flat or circular complete including dismantling of existing service connection all as specified and directed.

S&F, in repairs, PVC Insulated and PVC sheathed Industrial 3 Core Flat Submersible cable 6 sqmm with bare bunched copper conductor for submersible pump motor with voltage grade 1100 volts as per IS 694/1990 including jointing connecting with submersible motor to starter including removing old submersible cable complete all as specified and directed.

S&F, in repairs, PVC Insulated and PVC sheathed Industrial 3 Core Flat Submersible cable 10 sqmm with bare bunched copper conductor for submersible pump motor with voltage grade 1100 volts as per IS 694/1990 including jointing, connecting with submersible motor to starter including removing old submersible cable complete all as specified and directed.

Supply & lowering GI heavy duty column pipe 80mm (3" bore), Class 'C' , 3 Mtr long in bore well including all cutting and threading both end, ISI marked, with heavy duty 100mm long thread for lowering complete all as specified and directed.

Supply & lowering GI heavy duty column pipe 100mm (4" bore), Class 'C', 3 Mtr long in bore well including all cutting and threading both end ISI marked with heavy duty 100mm long thread for lowering all as specified and directed.

Cutting and threading 80mm (3" bore) both end MS / GI column pipe heavy duty 3 Mtr long including new socket 80mm bore and 100 mm long complete all as specified and directed.

Cutting and threading 100mm bore (4" bore) both end, MS / GI column pipe, heavy duty 3 Mtr long including new socket 100mm bore and 100 mm long ISI marked with heavy duty complete all as specified and directed.

Yield test for the borewell by continuously pumping for 16 hours to determine safe pumping yield complete all as specified and as directed

Taking out Submercible Pump Set at different locations alongwith Column pipe of 80 to 100 mm bore with Submercible cable from the bore well of depth ranging for 30 Mtr to 90 Mtr and transporting it to work-shop for dismantling / opening for repair & taking out un-serviceable parts for repalcement and carryout all repair/maintenance and re-assembling and refitting in the existing position including lowering, tightening of rope to the pump by suitable arrangment of chain pully system and connection with starter electrically and connection with pipe line mechanically etc, capacity 7.5 to 35 HP including loading /unloading and transportation to and from workshop complete all as specified and as directed.

Lowering and re-fixing of submersible pump set of 5 HP to 35 HP at different locations including pump set fitting, commissioning and testing after repair & replacement of un-serviceable parts with existing column pipe 80/100mm bore with existing serviceable cable including tightening of rope to the pump by suitable arrangment of chain pully system and connection with starter electrically and connection with pipe line mechanically complete all as specified & ditected.

M&L for rewinding the submersible motor stator/rotor with supper enameled copper winding wire of existing size and gauge and turns etc including all the insulating material i.e. varnish, supper high quality cotton tape, insulating paper or soldring etc. including drying upto desired temperature for specific time complete all as specified and directed by Engr-in-Charge of the following capacity of submersible pump:- Note : (i) Rewinding warranty of submersible pump shall be of 06 months. (ii) Unserviceable PUMP/ Motor should be installed within 24 Hours when and after intimation for failure of motor (iii) A recovery of Rs 2000 for delay in the Installation of pump (iv) Before installation of motor / Pump , it should be ensured that all unserviceable spare parts of Motor / Pump are replaced (v) Spare parts will be measured and paid for separately

(c) 20 HP to 22.5 HP

(e) 5 HP to 15 HP

S&F in repairs fitting for spigot socketed cast iron pipes 80 to 300mm bore such as bends (any type, radius and angle), tapers any type straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, 'Y' jujction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs complete all as specified and directed.

Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sludge lying on the bottom of water storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank. 8. All inlet & outlet pipe line should be free from any leakage , if any found that should be changed at site by the contractor . 9. writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

(a) 500 ltr capacity

(b)1000 ltr capacity

(c) 2000 ltr capacity

(d) 5000 ltr capacity

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 2 Layer including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 2 Layer including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 2000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) 2 Layer including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 5000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

S&F, 20mm bore, float valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)

S&F in repair 25mm bore,float valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms)

S&F in repair 40mm bore, float valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms)

S&F in repair 50mm bore, float valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair, 15mm bore, float valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -142 Gms)

S&F in repair, HDPE water storage tank lid black (with arrangement for locking for 500 litres capacity tank complete all as specified and directed.

S&F in repair, HDPE water storage tank lid, black (with arrangement for locking for 1000 litres capacity tank complete all as specified and directed.

S&F in repair, HDPE water storage tank lid, black (with arrangement for locking for 2000/5000 litres capacity tank complete all as specified and directed.

S & F steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors, in old/new situation for bore of pipe following sizes: -

(a) 20mm dia

(a) 25mm dia

(b) 40mm dia

(c ) 50 mm bore

S & F in repair gate / globe valves cast copper alloy screwed both end down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size : -

( a ) 20 mm bore.

( b ) 25 mm bore.

(c ) 40 mm bore

(d) 50 mm bore

M&L for 25mm thick cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E-250) quality- A, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc,. Complete drilled for fixing of steel sheeting or other covering . Door etc to be prepaired for hanging or sliding with and including either hooks or steel hanging door fittings also fastening and fixing complete conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

M & L for excavation in any type of soil & taking up pipe /fitting of size 80 to 200 mm dia GI/PVC cutting, rethreading/jointing the pipe and replacing unserviceable fitting, returning and filling the excavated soil and testing the joint complete all as specified and as directed. ( Note : Necessary Excavation upto 0.60 cum shall be included in the job ')

M & L for painting with approved colour to existing MS/GI pipe (rising main, delivery, over flow and wash out) of size 100/150/200mm dia, 30 mtr height over head tank with two coat of synthetic enamelled paint including scrapping out old paint complete all as specified and directed. (Note:- Unit rate quoted by the contractor shall be deemed to include for All T & P required for 30 mtr staging, mtrl and man power risk )

M & L in replacement CI non return valve of bore 150 mm dia ,ISI marked complete all as specified and directed.

M & L in replacement CI non return valve of bore 100 mm dia ,ISI marked complete all as specified and directed

M & L in replacement CI non return valve of bore 80 mm dia ,ISI marked complete all as specified and directed

Supply / Fixing / erecting in replacement, steel tubular poles complete with cast iron base plate, finial taper plug , bolts Nuts & screws complete all as specified type 410SP 31 of 9 mtr long including painting of pole with one coat red oxide primer & two coats of aluminum paint & emedded portion shall be painted with two coat of black bituminous paint all as specified in IS and all as shown in drawing No CEJZ/TD/824/91, Sheet No1/2 dt 16.04.91 with following specifications:- (i) Excavation in trenches in any types of soil ,returning filling in & well ramming including watering and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points. (ii PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in foundation bedding all as specified and directed . (iii) PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as upto ground level. (iv) PCC (1:2:4) type B-2 using 20mm graded stone aggregate as in coping including necessary form work. (v) Writing pole No with yellow shade on black base using synthetic enamel paint having height of words exc 5 cm as directed by Engr-in-charge.

Supply and fixing in replacement LED street light luminaires not less than 70 watt, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 with 10 KV built-in-surge protection device including service braket complete all as specified and directed.

Supply, fixing in replacement, LED flood lights, not less than 100 watt, Energy saving and environmental friendly long life LED flood light made up of pressure die cast aluminium housing with high power LED as lighting source , with IP65 protection and impact resistance Including cross arm to fix in LT pole, nut, bolt etc complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core.

Supply only alum crystals for water treatment as specified and as directed

Supply and fix junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm, 5 way having terminals for termination of cable with necessary nuts and bolts ,Make - Hansal including -02 Nos polycarbonate cable gland Make :Hansal, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 16 Amps Make - Legrand in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete in and including taking down existing unserviceable junction box of any type complete all as specified and directed.

M&L Rubber mat of size 1 M x 2 Mx 2MM complete all as specified and as directed

Material and labour in replacement control wiring/ motor starter wiring of pump motor starter panel with PVC insulated copper contactor of sizes 2.5mm/4sqmm all as specified and directed.

S&F 15mm bore bib tap cast copper alloywith crutch/buterfly handle screwed for iron pipe complete all as specified.

S&F, in repair, including connecting and commissioning of MU - G50 fully automatic submersible pump star delta starter, relay range 30-50 A in sheet metal enclosure conforming to IS/IEC60947-41, protection from overload conditions, single phasing, phase reversal & imbalance, auto restart features, vibration proof enclosure with IP 54 protection class, Power/Pump ON/OFF indication, voltage and ampere complete all as specified and as directed. (Cat part No. CS960008 of make L&T or equivalent in Schineder/Seimens as approved by GE)

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised wire of size 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe medium grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear incl 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed.

Schedule of Credit amount of Rs 1,48,420.00 to be deducted during AOC

kiran electrical and hardware centre

Sachdeva Enterprises