Providing LIS Sakori and adjoining village in GP Sakori Tehsil Kandaghat District Solan HP Sub Head _ Construction of RCC intake _ laying of HDPE pipe for feeder line _ Construction of RCC sump well for 1st stage and 2nd stage

Amount

Excavation in foundation trenches etc. upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing of pumping out water, blasting soft/ hard rock or chiseling soft/ hard where blasting is prohibited. In all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking the useable and un-useable material/ soil separately and then returning the stacked soil in 15cm (fifteen centimeters) layers where required into plinths, sides of foundations etc. including consolidating of each deposited layer by ramming and watering and then desposing of all surplus excavated soil un- useable materials complete in all respect with in all leads & lifts as per direction of the Engineer-in-charge.

Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock hard rock including including dressing of sides and beds, disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of Engineer-in-charge.

Laying, jointing & testing in trenches high density polythelene pipe for use for buried water main and services jointing of pipe shall be done by butt welding which shall be BIS marked (BIS-4984-1995 or latest with upto date amendments) of PE-80 PN-4 & pressure rating complete in all respect. Earth work to be measured and paid separately in all leads and lifts as directed by Engineer-in-charge.

50mm dia PE 80 PN 4

75mm dia PE 80 PN 4

110mm dia PE 80 PN 4

180mm dia PE 80 & PN 4

Laying, jointing, testing and commissioning in trenches galvanised mild steel tube of following dia (light grade) including providing and fixing tube fittings such as reducer increasers, sockets, union, tees, bends etc. where ever required (earth work in trenches to be measured and paid for separately) and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Inlet pipe & outlet pipe 50mm dia

Scour pipe 65mm dia

Providing, laying and jointing in trenches API pipe of following dia plain ended API pipes with steel grade A of thickness as mentioned and grade designation with bevelled edges and capable of with standing required test pressure in random length of 4-7 meter including testing and commissioning and cost of jointing with butt welded as per relevent BIS specification grade API 5L-x-42 or equivalent standard ISO 3183-2007 including cost of bends tail pieces, tees, reducers increaser etc. as per site requirement as per direction of Engineer-in-charge (Earth work in trenches to be measured and paid for separately) including entire carriage of material upto all leads & lifts.

1st stage dia of pipe 300mm

with wall thickness 7.10mm Grade 5L-X-56

with wall thickness 6.40mm Grade 5L-X-56

with wall thickness 5.60mm Grade 5L-X-56

with wall thickness 4.80mm Grade 5L-X-56

2nd stage dia of pipe 250mm

with wall thickness 5.60mm Grade 5L-X-42

with wall thickness 4.80mm Grade 5L-x-42

Providing and fixing M.S plate flanges conforming to BIS 6392-1971 (latest with upto date amendments) of various dia (nominal bore) of following flanges Table welded at both ends of pipe (as per site conditions for the particular reach as required) according to relevent BIS code IS 816-1969 or latest as applicable with upto date amendments with nuts, bolts of required size as per BIS code 1364 i/c 3mm thick compressed asbestor fibre gasket of synthetic rubber gasket confirming to relevent BIS code 2712-1965 complete in all respect upto all leads & lifts as per direction of Engineer-in-charge.

1st stage dia of pipe 300mm

RD Table

2nd stage dia of pipe 250mm

PUMPING MACHINERY CENTRIFUGAL:- Supply, Installation, Testing & Commissioning of star rated energy efficient horizontal spindle, horizontal/ radial split casing/ end suctions (back pull out arrangement) single/ double/ multistage centrifugal pump suitable for operation, in parallel of recommended make such as Mather and platt/ KSB/ Kirloskar/ Jyoti/ Beaconweir BS&BE or any other approved make confirming to BIS-1520-1980 with upto date ammendments, read with IS:9137-1978 or latest edition suitable for lifting clear water for under mentioned characteristics with bronze/ Bronze with 2.5% Nickel impellers, dia of 405mm priming funnels, casing ring and shaft sleeves of bronze/ steel, shaft of SS:410/AIS 1431 Chrom in plated with cast iron casing coupled directly through a flexible coupling on a Common MS base plate to squirrel cage screen protected drip proof induction motor/ TEFC/ CACA of standard make such as Kirloskar/ BHEL/ Crompton/ NGEF/ GEC/ Siemens/ Jyoti/ Area Brown Boven (ABB)/ CGL and suitable for operation on 415 volts, 50 cycles/ second 3 phase AC electric supply. The power of electric motor/ motors should be at least (+) 10% in excess of the maximum power required by the pump/ pumps in the operation range of (+) 10% and (-) 15% of the duty point head. The motor/ motors should be as per IS: 325-1978 with upto date amendments read with IS: 900-1972. The starting current of the motor shall be limited to not more than 4.5 to 5 times of full load current.

It should include cost of bearing nuts, bolts and painting etc and should meet the following requirement including Pump sets (working + standby), All electrical equipments such as Starter, ICTP switches, MCB, Bush bar chamber, MCB, Panel board indicating lamps, Ammeter, Voltmeter, Hour run meter should be of electronic type, incoming and outgoing water proof cable for panel board, Double loop earthing, copper cable pressure gauge, capacitor, common header, sluice valve, NRV including erection and testing complete necessary piping for suction and common header and control valves alongwith electrical works including all taxes, insurance, transportation, freight charges, inspection charges, loading, unloading, conveyance to Departmental stores/ site, stacking, etc. including specials and wastage etc.; complete as per Tender Specifications and instruction of Engineer in charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender. The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories/ valves/ piping work etc. should meet with the following requirements.

(i) Sluice Valves/ Reflux Valves to be provided on delivey line:- These shall be double flanged valves of approved make & size of valves shall be of one size higher than delivery size of offered pump.The class of valves for stage -1st shall be, cast steel ASA-600 & for 2nd stage these shall be of cast steel ASA-600. (ii) Reflux Valves to be provided in Rising Main:- It shall be double flanged valve of approved make & size of valve shall be same as dia of rising main pipe. The class of valve shall be Cast steel ASA-600 for both stage 1st and 2nd respectively. (iii) Piping work (Common Header, Delivery pipes & Suction pipes):- The piping work shall be of same specifications as the R-main in intial RD's. The size of common header shall be same as dia of R-Main. in No case pipe wall thickness shall be less than 4.80 mm. The common header & delivery pipes shall be properly jointed with flanges of appropriate Flange table with butt welds. (iv) Power shunt Capactors:- Capacotors shall be of suitable KVAR so as to improve power factor to 0.95 or above. (v) Pannel Boards:- It shall be of suitable size & capable to accomodate all above electrical accessories i/c providing & fixing in position these accessories & interconnections with cable of appropriate size & specifications. (vi) Startes:- Starters for each stage pumping machinery for stage 1st and 2nd respectively shall be of approved make & of suitable rating suitable for safe running and operation of given motor or pumping machinery It shall be mounted on panel board with magnetic type over load release & dashpot, time lag, under voltage release with initial oil filling if required. (Detailed requirement of pumping machinery & its accessories shall be as per design data sheet No. 1 & No. 2 respectively for stage 1st & 2nd).

Stage-1st - 3 sets (3 working & 0 standbye) for duty condition discharge of = 22.61 LPS with Total Head of = 544.90 mtr. The BHP is to be offered by the bidder & rate shall be filled in by the contractor per set.

Stage-2nd - 3 sets (3 working & 0 standbye) for duty condition discharge of = 12.10 LPS with Total Head of = 344.65 mtr. The BHP is to be offered by the bidder & rate shall be filled in by the contractor per set.

Provding and laying cement concrete 1:4:8 (1 cement:4:sand :8graded stone agg. 40 mm nominal size) and curing complete exclunding the cost of form work in foundation and plinths. including entire carriage of material upto all leads and lifts.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

i) Wall (any thickness but not less than 0.1m thickness) attached pillasters, buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

ii) Foundation and plinth including entire carriage of material upto all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in positon complete upto floor two level including entire carriage of material upto all leads & lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring, shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:-

i) Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

ii) Flat surfaces such as sofits suspended floors roofs, landings and the like floors etc upto 200mm in thickness.and as per the direction of Engineer-in-charge.

iii) Edges of slabs & breaks in floors & walls under 20cm wide.

Providing & laying cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size and curing omplete excluding cost of form work & reinforcement for RCC work in suspended floors, roofs landings shelve & their supports balconies girders bresumers and cantilevers upto floor two level i/c entire carriage of material upto all leads & lifts.

Providing and laying cement concrete 1:5:10 (1cement:5sand:10graded stone aggregate 40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/ breast walls, the size of plums shall usually be 150mm to 300mm as per HPPWD specification. including entire carriage of material upto all leads and lifts.

Providing & fixing man hole cover with frame 500mm dia (medium duty) total weight of frame and cover should not be less than 116 Kg. (weight of frame 58 kg and weight of cover 58 kg).

Steel work welded in built up sections, trusses and frame work i/c cutting histing, fixing in position and applying a priming coat of red lead paint in beams, joists, channels, tees flate with connecting plates of angle cleats in main and cross beam, hip and jack rafters purlins connected to common rafter and the like including all leads and lifts as per the directions of the Engineer-in-Charge.

P/F C.I. ventilating pipe 100mm dia. 1 mtr. high with C.I. cowl fixed at top.

2nd class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1cement:6sand) including entire carriage of material upto all leads and lifts complete in all respect.

20mm cement plaster in single coat on rough side of masonry for interior plaster upto floor two level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:6 (1cement:6 sand) as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

6mm cemet plaster in single coat on rough side of ceiling for interior plaster upto floor two level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm in grith and finished even and smooth with cement mortar 1:4 (1cement:4sand) including entire carriage of material upto all leads & lifts.

Pointing on brick work with cement mortar 1:3 (1cement:3sand) flush pointing including entire carriage of material upto all leads & lifts.

P/ F pressed steel door frames manufactured from commercial MS sheets of 1.25mm thickness including hinges, jump lock jamb lead and it required angle threashald of MS angle 50 x 25 mm or base tie of 1.25mm pressed MS welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamp i/c steel butt hinges 2.5mm thick with guards, lock strike plate and shock as specified and applying a coat of steel primer after pretreatment or surface as directed by Engineer-in-charge.

Profile- A

Profile- B

Providing fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws 40mm thick 2nd class deodar wood.including entire carriage of material upto all leads and lifts.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.and as per the direction of Engineer-in-charge Including enitire carriage of material upto all leads & lifts.

Cement concrete flooring 1:2:4 (1cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40mm thick including entire carriage of material upto all leads and lifts.

Providing and fixing on wall face cast iron water pipe including fitting and joints with spun yarn and cement mortor 1:2 (1cement:2sand) including entire carriage of material upto all leads and lifts.

Painting top of roof with bitumen of approved quality @ 1.70 kgm2 impregante with a coat of sand at 63 cm3 per 10 sqm including creaming the slab surface with brushes and finaly with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of penetration 80/100. Including entire carriage of material upto all leads and lifts.

Providing & laying brick tiles over mumty roofs grouted with cement mortar 1:3 over a 12mm layer of cement mortar 1:3 and finished needly within all leads & lifts and as per direction of Engineer-in-charge.

Applying priming coat over steel and steel based surfaces after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter with ready mixed paint brushing wood primer pink including entire carriage of material upto all leads and lifts.

Painting two coat excluding priming coat on new steel and steelsurfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand papering & stoping including entire carriage of material upto all leads & lifts. (White enamel paint)

White washing with lime on decorated wall surfaces (three coats) to give an even shade including throughly brooming the surface to remove all dirt dust mortar drops and loose scale of lime wash and other foreign matter including entire carriage ofmaterial upto all leads and lifts.

Hirmachi colour wash on undecoated wall surfaces two coats) to give an even shade i/c thoroughly brooming the surface to remove all dirt, dust mortar drops and loose scale of hirmachi wash and other foreign matter as per direction of Engineer-in-charge including entire carriage of matterial upto all leads & lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including entire carriage of material upto all leads and lifts.

Providing 40x3mm flat iron hold fast 40cms long including fixing to frame with 10mm diameter bolts nuts and wooden plugs and embedding in cement concrete block 30x10x15cms 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) including entire carriage of material upto all leads and lifts.

Providing fixing Aluminium tower bolts barrel type anodized transparent or dyed to required shade and colour with screws etc. complete. 200x10mm

Providing fixing MS handle anodized transparent or dyed to req. shade and colour with screws etc. complete.

Providing fixing sliding door bolts anodized transparent or dyed to required shade and colour with screws etc. complete. 250x16mm.based surfaces after and including preparing the the surface by throughly cleaning oil, grease, dirt and other foreign matter with ready mixed paint brushing wood primer pink including entire carriage of material upto all leads and lifts.

Providing & fixing fan clamps type 1 of 16mm dia bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of roof as per standard design complete in all respect including entire carriage of material upto all leads & lifts.

Providing and fixing M.S. grills of required pattern in wooden frames/ pressed steel frame with M.S. flat, square or round bars 12mm dia with round headed bolts and nuts or by screws as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. (Plain grills).

Internal wiring:-

Wiring for light/ fan point/ exhaust fan point/ call bell point with 1.5 sqmm PVC insulated heat resitant flame retardent (HRFR) of low smoke single core (flexible) copper conductor cable in PVC casing and capping and earthning the light point with 1.5 sqmm HRFRLS/ PVC insulated single group "C" as required including carriage of material upto all leads & lifts.

Wiring for light/ power plug with 2x4 sqmm PVC insulated heat resistant flame retardent (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and caping along with 1 no, 4 sqmm HRFRLS/ PVC insulated single core copper as required including entire carriage of material upto all leads & lifts.

Wiring for light/ power plug with 4x4 sqmm PVC insulated heat resistant flame retardent (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 2 no, 4 sqmm HRFRLS/ PVC insulated single core copper as required including entire carriage of material upto all leads & lifts.

Wiring for light/ power plug with 2x1.5 sqmm PVC insulated heat resistant flame retardent (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 no, 4 sqmm HRFRLS/ PVC insulated single core copper as required including entire carriage of material upto all leads & lifts.

Wiring for circuit/ sub main wiring with 4x1.5 sqmm PVC insulated heat resistant flame retardent (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 2 no, 2.5 sqmm (4x2.5+2x2.5) HRFRLS/ PVC insulated single core copper conductor cable as required including entire carriage of material upto all leads & lifts.

Supplying and fixing metal box of 100x100x60mm deep (Nominal size) on surface/ recess with suitable size phonolic leminated sheet cover fixing 3 pin 15/16 amps socket tumber/ piano type switch connections painting etc. including entire carriage of material upto all leads & lifts.

S/F of 6 amps to 32amps rating 10 KA breakin capacity, 240 volts, "C" curves miniature circuit breaker of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required including entire carriage of material upto all leads & lifts catagory-A sinlge pole.

Supplying and fixing 40 Amps/ 50 amps/ 63 amps rating 10 KA breaking capacity 240 volts "C" curves miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including entire carriage of material upto all leads & lifts. Double pole catagory-B 63 Amps.

Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 volts, on surface/ recessed complete with tinned, copper busher neutral link, earth bar, din bar, detachable gland plate, interconnections, including painting, earthing etc. as required: bus bar 8 way.

Providing, installing, testing and commissioning of 2x36 watt- CFL surface mounting (category "A" including wiring with 1.5 sqmm PVC insulated copper conductor single core cable etc. as required.

Providing, installing, testing and commissioning of ceiling fan and regulator including wiring the rod of standard length (upto 30cm) with 1.5 sqmm PVC insulated copper conductor single core cable etc. as required 1200mm sweep. Category A.

Providing, installing, testing and commissioning of 1x36 watt- FTL (T8) shock proof slim (category "A" including wiring with 1.5 sqmm PVC insulated copper conductor single core cable etc. as required.

Providing & fixing Alfa valve to regulate the water through out let and delivery tank complete in all repscet

80mm dia

65mm dia

Providing water opening gate complete in all respect.

HYDRAULIC ENGINEERING COMPANY

HILL CONSTRUCTION AND ENGINEERING CO. SOLAN

MS Kamal Dev Sharma