PROVN OF ALL WEATHER SHED OVER UAC PIT AT CDO TRAINING AREA OF HQ JL WING, THE INF SCHOOL, BELGAUM UNDER GE BELGAUM

Amount

Excavation in trenches not exc. 1.5metre deep and not exec 1.5 metre wide for foundation and getting out in hard/densesoil complete all as specified and as directed.

Excavation in post holes each n. exc. 0.5 Cum getting out in hard/dense soil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and as directed.

Material and labour for Plain cement concrete type B2, 1:2:4 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

Materilal and labour for Plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Material and labour for Reinforced cement concrete M-25 Grade (Design mix) as in foundations, including footings, foundation beams, plinth beams, bases for columns, basement slabs, and mass concrete or similar items etc complete all as specified and as directed

Material and labour for Reinforced cement concrete M-25 Grade (Design mix) as in Columns,Pillars,piers ,posts and struts or similar items etc complete all as specified and as directed

Supply and fix Mild steel TMT bar of FE 550 D Grade , 10mm dia and over, cut to length bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed .

Description all as per item no :09 here in before but 5 to 10 mm dia as in stirrups/spacers

Material and labour for use and waste of steel form work to sides of concrete foundation, footings, bases of column, raft and raft beams, sides and soffits of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and as directed.

Material and labour for use and waste of steel form work to sides of columns pillars,posts,struts of size square,rectangular or polygonal etc for flat rough finished surfaces of concrete complete all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT)of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD .

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Rolled Mild steel in roof trusses (Framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'A' complete all as specified and as directed

Supply and fix Mild steel Tie bars with screwed ends,nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe290 Gde-E-165 complete all as specified and as directed

Supply and fix Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc confirming to Gde Fe 410-W (Gde-E-250 quality - A) complete all as specified and as directed.

Supply and fix Mild Steel work as in wind ties ,hold fasts etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Supply and fix Mild steel frame work such as grills, gratings etc. with ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, railings and similar work conforming to FE 290. Gde-E-165 complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description exc 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of zinc chromered oxide primer complete all as specified and as directed

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 complete all as specified and as directed.

Material and labour for Rendering 15 mm thick on fair faces of brick work or concrte surfaces in CM 1:4 ,surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparing new surface of wall of any description and applying two coats of cement based paint white or tinted over a coat of alkali resistent primer complete all as specified and as directed.

Material andd labour for Hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surface complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 75 mm thick as in sub base of floor including necessary steel form work complete all as specified and as directed.

Material and labour for Plain cement concrete type C2 1:3:6 ( using 40 mm graded stone aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for 100mm thick PCC(1:2:4) type B1,(using 20mm graded stone aggregate) as in floor and surface finished even and smooth with using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for glass dividing strips 3 mm thick width of strips 38mm and inserted in position to confirm to design.complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block 80 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 with grey cement M-40 grade complete all as specified and as directed.

Material and labour for 50mm thick river sand cushion under interlocking paver block including watering and consolidation, complete all as specified and as directed

Mehta and Co.

M/s B C CHOUGULE

ASHIRWAD ELECTRICALS

SAGAR ENTERPRISES

M/s. N D KALING

M/S MAHADEV M PATIL